how do you reset via keymaps to keymaps from qmk? i tried to clear EEPROM and reflashed firmware but keymaps are still from VIA.

I'm fairly new to VIA/QMK and just curious if its possible to define f25~f99 (or more) keys.

my via software is loading for a long time and I need to fix my mw65 keyboard with it

Hi I just started using VIA and I need more function keys that I can assign things to in AHK and discord but VIA only seems to go to f12. Is there a way to use f13-f24?

New to via, is there a mute mic option or a way to get it?

I recently started using a custom keyboard I bought a while ago and noticed the backlight toggle no longer works. This is a DZ65 pcb I believe and it was working fine up until 2 days ago. I also noticed that I always have to toggle the backlight off manually when I shut down my PC, otherwise the backlight just stays on. Now I have to unplug my keyboard entirely since the toggle doesn't work. Changing the HUE etc all still works. Any ideas?

Hey! I have a keyboard pcb that uses via, and everything works fine except when I press the lighting tab. The whole application turns a solid color and nothing works until I close the program and restart it. Is there a fix to this? There's this light that's on in the back and I'm trying to turn it off but I can't.

When I try to map some QMK lighting to the board, it doesn't change the lights at all.

(Keyboard is an Alix40 btw)

I recently got my first split keyboard with thumb clusters. (Redox) I've flashed it with via formware and have almost everything how I want it, except I'd like to start using my thumb home keys (left is backspace and right is space) to also act as shift when held down. I found there is a special mapping that acts as space when tapped and another layer when held down, but is there a way to have my left thumb key be backspace and do the same when held down?

Hey everyone,

I'm trying to get my caps to lock light up when it's on, and turn it off when it's off. How can I do this? I'm using a KBD67 MKII RGB V2. Thank you!

I'm still new to via and all of its key mapping. Before today I had it set up with control as my function to change my rgb and to do some other things. But I've messed up and deleted that function and I'm not sure what it was called. My pcb is a DZ60 if that helps, thank you!

The simple answer is there is no FN key that exists so you have to make it using the VIA program. What you do is make the FN key mapped to switch to another keyboard layout that has the numbers replaced with the function keys. I attached some photos to help.

I hope this could help someone because it was really annoying to try and figure out. I can answer any questions that you have.

Hey im having trouble with VIA, ive been using my keyboard fine for the past 4 or so months and it has been working fine, but today my caps lock randomly registers as a left control input. Even when it shows on VIA that the caps lock is mapped as caps lock, when i go on the keyboard tester it registers as left control, and when i press the real left control it also registers as left control, can anyone help me with this? If it helps my motherboard is a DZ65RGB V2

Hey everyone, im very new to the custom keyboard scene, i just wanted to try my hand at it cause i love the awesome combos of switches plates padding case lube etc to make the perfect keyboard sounds for you. i bought the epomaker gk68xs mainly because it was not so expensive it had hotswap capability and it still had LEDS. i got the board put in some lubed gat blacks and its great but man does the software BLOW. idk if its possible to make this KB via compatible but i am willing to pay for the privilege if it is.

Hey, so I got all of the keymaps, JSON.file, and rules stuff working for VIA, but the VIA app will freeze if I upload the .json. It'll work on my Mac, but not on my Windows PC. Any thoughts?

Hey I recently got my KBD75v2. And found VIA and started using it. MY problem is that I can't change any lignting settings.

Thanks for your help.

I know it'd be pretty easy to do it using layers, but my layers are already kinda complicated and I don't want to have to move them around again.

Posted this is /r/linux4noobs and will in /r/ubuntu but will see if I can get some help here also.

Hello! I have a Via ARTiGO 1250 PC that is still sold today and has Via C640/C645 VX11 graphics.

In Windows 10 its DX11 compatible - but it runs a bit too slow for me.

Ubuntu is driving me nuts. I tried:

• 14.04.x
• 16.04.x
• 18.04.x
• 20.04 (would not even boot from USB)
• 20.10
• 21.04 test

I tried the following drivers:

• Unichrome
• OpenChrome
• Via drivers for VX900 for Lubuntu 15.04 (x64)

The VX900 said I did not have a Via Chipset - Which is dumb TBH.

I learned how to compile things. But I could not compile Unichrome. I edited the Xorg.conf to have the settings for changing the driver to openchrome.

Nothing is working and its driving me nuts. My google-fu is usually on-point but I'm scratching my head here.

Any help would be awesome!

"Fingers crossed for the Centaur CNS. We should be getting one soon. "
-Ian Cutress, Nov 30th
https://twitter.com/IanCutress/status/1333618256851165189

According to a reply further down the twitter thread, he said that he has been in contact with Via and their roadmap for the part was impacted by the pandemic. I hope at least Phoronix and ServeTheHome get samples too.

I have this via mark core fussion 533mhz board/chip which I got off ebay for $4 and I just wanted to know if anyone knows how to use it.