In Canada FYI. Can get a CGW S-2 and reach reduction kit with curved trigger or the Eemann tech pro kit, reach reduction kit, and flat trigger.

Initially i wanted to tinker because i have very short fingers and the stock S2 is nearly unshootable for me in DA but otherwise love the gun.

Few rabbit holes later, im at this crossroads. Which one should I pick? Im more keen on flat triggers but if the pull on the CGW is significantly better than I’ll go with that. It’s also almost nearly twice the price.

Most importantly, how’s reliability and installation on these two kits? I’ll be competing IPSC this year and run through a lot of rounds. Parts not easily available in canada due to bans and all that. I recognize CGW has tons of parts and thats the worrisome part; re: installation and reliability.

Muchos gracias mon amis

I found a good deal on an SP01 Tact. Unfortunately the deal is for a low capacity 10 round. Will regular free state mags work? I’ve never purchased a limited round pistol before and couldn’t get an answer from google on this. Assuming if I purchase a standard mag it will fit with no gaps but unsure and not educated on this. Thanks.

Finished building out the p10f. Carried this or a P09 as my duty gun for years, finally decided to comp it, and it's phenomenal. Total build only $810 invested.

Finally decided to pick up a side by side (coachgun). I got the Bobwhite G2 side by side. Looks great and everything! Only thing I would like to change is the white bead. Granted i only looked at CZ's website but they had none whatsoever. any suggestions would be greatly appreciated!!!

I just had my P10c milled for an optic from jagerwerks and I’m needing to replace the iron sights to hopefully cowitness with a holosun 407c. However, I’m a bit confused about what sights will work on this and was hoping someone might know which set or combination will work best.

I have a S2 Orange that I bought the CZ magwell for, the installation instructions did indicate that I may need to replace the original mag pads/baseplates for thinner ones but I bought Lok extended baseplates instead. I don’t want thinner baseplates. So, I tried the original base plates today and they don’t work with the CZ magwell. I know I have seen S2’s with a magwell and extended baseplates, do the Lok baseplates work? I’d like to know before I install them in case I have to return them and also I wouldn’t know if they really work until I go back to the range. If the Lok extended baseplates don’t work with the CZ Magwell, then what baseplates do? Thanks for any insight on this.

Tried with multiple frames, barrels and without the guide rod/spring installed.

Specifically thinking about getting my P-01 cut for EPS Carry and wanted to hear how well they do for optics cuts.

Swapping trigger for CZC Hybrid - in shop getting blacked out. Might change the mag release button to a more textured G10. Anyone have good experiences with nitriding their barrel?

Thinking about picking this up from a local dude. Is this setup worth $1500?

Comes with the following:

• Impact machining: red dot plate
• Trijicon: RMR red dot
• EEMANN TECH: Sa/DA custom trigger
• Vytel: swollen palm grips.
• CZ custom. Black mag release
• Taran tactical: 2x 17+1 mags
• Comes with original case, original mag base

After 2 years of searching, I was finally able to find one a few weeks back. Now time to start building it: SAO conversion Shadow 2 extended safeties Maybe optic cut and Springer Precision Magwell.

I’m looking for a leather shoulder holster for outdoor carry any recommendations?

I'm looking for a belt holster for my battle belt. I need L2 retention, but prefer L3.

Any thoughts? I saw some safariland ones which support that. Tier1 has one, but I found their retention to be meh.

Thinking about sending my RAMI in for a CGW upgrade. I’m really curious to get some opinions on the SAO upgrade. Also, based on what I’m reading, the SAO is an easier upgrade than the full package so I should be able to do it myself. I’ve heard the hammer pin is a beast to remove.

Very excited! I have tried maybe 10 pistols and the P10F won out. I am getting the 5.1" threaded barrel OR version, and was wondering if anyone had compensator suggestions? I am disabled with several spinal diseases and I need to do everything I can to mitigate recoil as I continue training.

Hello, quick question

What options are out there for basepads that fit with the factory CZ Magwell? Apparently the factory Mecgar +2 ones will not fit the gun with the Magwell.

Does anyone have experience if the Armanov ones fit?

Thanks to everyone in advance 🙏

He visto múltiples comentarios al respecto donde defienden el uso de Snap Caps. Y detractores que dicen que las CZ de martillo son débiles de los pines y la aguja

I was using an alien gear iwb holster for my PCR, not a big fan of that holster, looking for something really simple and easy to put on and take off. Any suggestions?

Never owned a CZ pistol until I bought the SP-01 a few months ago. Naturally, I became addicted to how nice it was and how well it shoots and I had to keep chasing that high….I ended up with the S20, and that gun is just a damn cheat code and an absolute dream to shoot. Not sure what’s next on the list, but I am happy to keep going down the rabbit hole!

Holosun SCS (6) 19rd mags, Olight PL-3s lead filled WML, Overwatch TAC trigger & NP3’d striker, 14.5# orange recoil spring & SS Cajun gunworks guide rod, Killer Innovations threaded barrel & compensator, Taylor Freelance black brass backstrap, NDZ mag base plates, Black Steel gas pedal

Not too sure how to word it, but I want to reduce the trigger pull to remove the initial free travel. im fine with the actual pull weight and all that, I just want to be able to start immediately working the hammer when I'm on trigger. Anyone got any ideas?