I thought it’s the vortex who’s GeForce helps pulls the trichomes off when your spinning it round and round.

I use a broom stick in a garbage can. I keep spinning to get a massive vortex going.

Does a washing machine yield the same as the hand method? I would like to do less work!

Is it more aggressive and cause more green contaminant’s into the final product?

And lastly, I was going to just get a normal washing machine from Craigslist for $50, those cheap crappy plastic 5g bubble hash washing machines are like $200 on Amazon! I assume an actual washing machine will be just as good?

i dried this 90u hash and want to press it in future but is all stick together so i wonder to make a temple ball now and later press the temple ball or i can freeze this sticky plate and do another microplane for having sand to press better ? thanks for your advice

I got plenty of Wpff Material and i was wondering how i store it right before press it to Rosin until i got my Press. Also later i can just press the Hash balls when i flat them and put inside bags ? great day guys

Genuine question here. I have some weed/trim from 4 years ago that was stored in jars and has lost its original smell, it’s brown and might even smell a bit fermented. Is this worth running for hash or should I toss it?

So I'm been lucky in the past few years to live in a dry cold area and dry sift was my preferred method. 120 screen on top and 73 on bottom. Got about 3-5 percent return of super melty heads with rarley the need to use static to clean up. At least for my use case. Anyway now moving to central America where it's 80-100% temp and humidity year round. This brings me to my question. After investing in an 8 bag kit with all the different grades couldn't I just use a 120 and 73 micron bags like I did when sifting? I'm curious as to why people use so many bags. Is this because of yield? I mean it's my understanding that anything below 73 is immature to varying degrees. And even there was a shit fuck ton of product on the 45 bag the THC content would be much lower. Add to that the increase in stalks and other crap. Just don't see the use. In dry sift I just tossed what was below my 73 screen. And the 160 to me seems quite large and I'd imagine what would be on top of the 120 would pretty contaminated. So sell me a reason to use more than just the 120 and 73 bags. I understand yield but I'm ok with 5% return, better product, and since I'll be running 20gal bags having just the 2 seems like a lot less work. We

Hey all. New to the sub and bubble in general. Is there a list of learning resources that I’m missing? Just trying to learn and don’t want to be one of those who ask questions that have already been answered elsewhere. I seem to be running into different opinions than what I’ve seen on Google. Thank you!

So i see now videos coming up where people dry their bubble hash in one day when they pre freeze the material later do slightly sieve and then put the sieved material in a vacuum chamber and pull the air out for 1 hour. whats your thoughts on this anybody tried this already?

Hey guys,

I just did my first bubble hash run with sungrown wpff material. Fist run was 12 min wich came out nice. Second run was 20 min but came out super green. Instead of doing a lot of short runs i wanted to do some longer runs. This first wash really was a test wash to see how everything works and i already know a lot of thing to improve for when i start washing all of my other weed that is still in the fridge.

How did the green hash already happen on the second run? I know it from plant material but this quickly?

How many times and how long do y'all wash?

Thanks

Like can I just freeze it after scraping the bags and when making edibles thaw it, decarb, and add to oil and make gummy bears etc?

Freezing, planing, drying, temple ball rolling all seems like a lot of work if I’m using it in edibles and don’t need to.

So I’m fortunate enough to have quite a few single gram jars of 90-120u melt (ungreased , pristine). Would I be able to cure a single gram into piatella? It’s just for my own recreation, experimenting with the different terps, etc. If I’m not mistaken piatella is wrapped in plastic before curing to prevent oxidation?

Hey Guys,

This year will be my first year making bubble hash. I know a lot of people are drying there bubble in the fridge. I do not have a freeze dryer but i would like to dry my hash in a normal kitchen freezer.

Do people have experience with this? Let me know!

I can imagine that it will take longer to dry after microplaning it but also that there will be more terps etc left in the end product.

What up! I’m looking to buy a büchner setup but not sure what size funnel I need in relativity to the amount of hash. I feel like 1000ml is too big I’ll only be putting in around 50g of hash in at a time. Anyone have some input?

Did three runs at approximately 5 minutes each then let it dry for a few days under a fan. Can I smoke this now or do I need to take further steps? The stuff smells so good I can hardly wait! Also I know there's a few bits of contaminants in there how can I get that out? Thanks everybody

Thanks for the answers. Kind regards.

First timer, just ran my first test with some fresh frozen grape walker wedding kush... what's next ? 😂

do you think adding the force of air agitation in the hash washing process instead of hand washing would be more gentel and efficient?

For example I found an air gun with 5 holes. I’m hoping if I hook that up to a air compression and stick the end of the air gun inside the ice-water bucket, it would potentially create a world pool using pure air.

Recently got some freshly processed bubble. It has not been dried yet and I don't have a microplane. Would a large grinder screen work the same? Any tips would help, thanks.

Please don’t tell me Frenchy, press club or Pedro and build a soil guy… I just ran ~ 400 grams of fresh frozen and it was a total loss. Not saying these guys don’t know what they’re doing but it didn’t work for me. Ran the rebranded over and over washing machine into rosin evelution bags. Environment was about 37 degrees ambient and added a layer of ice to the bottom of the washer then bud then a small layer of ice up top. Added RO water and waited 30 min for hydration then ran multiple washes starting short and progressively increasing in time. Yielded almost nothing… strain was gland gains by shwale.

Already have a freeze dryer and washer, any extra stuff I need or you guys use please let me know.