I just dropped my first quality spinner (Lautie Bit 5) on concrete the other day, and now I'm left with these little marks. Do y'all know of any way to fix this? Or should I just ignore it?

Hey, I’m looking to get a fidget spinner. I want something with decent weight and quality . Any recommendations?

Helpful hint: If your question can be stated in 1-2 sentences, it probably should be posted here.

Examples of questions that should go in this thread:

• "I live in (insert country here). Where can I buy spinners/bearings/caps/etc?"

• "Looking to buy my first spinner. What should I get?"

• "What do you recommend for a spinner that's under $____?"

• "I'm trying to choose between Brand 1 and Brand 2, which should I get?"

• "Has anyone purchased from Seller _______ before?"

• "Where can I buy bearings/bearing caps?"

• "What kind of bearing is this?"

• "Where can I buy (Brand) spinner?"

Also, please check the sidebar for resources before making a post. 95% of the questions that are asked have been asked before or have been addressed. Seeing the same questions pop up over and over again make everyone cranky.

Previous megathreads can be viewed here.

Note: Approved sellers/makers are permitted to link their store in any thread as they wish as outlined in the advertising rules thread. Please report abuse of advertising privileges and/or very obnoxious advertising habits to the moderators.

Does carrying around a spinner in your pocket cause problems for the bearing (e.g., lint or dirt in the bearing)? The reason I ask is that I like to carry spinners around to play with (also not the term "EDC" implies just this).

Show me what you got. US sellers preferred and a bonus toward Sam Rings.

Had some fun creating the entire experience. Always looking for feedback as well.

https://preview.redd.it/5a0lfrcbqtfe1.jpg?width=4032&format=pjpg&auto=webp&s=9ed7aa65fb73fcc88d59fce87cd4416a927df10d

https://reddit.com/link/1icgay4/video/7pqy94ncqtfe1/player

Helpful hint: If your question can be stated in 1-2 sentences, it probably should be posted here.

Examples of questions that should go in this thread:

• "I live in (insert country here). Where can I buy spinners/bearings/caps/etc?"

• "Looking to buy my first spinner. What should I get?"

• "What do you recommend for a spinner that's under $____?"

• "I'm trying to choose between Brand 1 and Brand 2, which should I get?"

• "Has anyone purchased from Seller _______ before?"

• "Where can I buy bearings/bearing caps?"

• "What kind of bearing is this?"

• "Where can I buy (Brand) spinner?"

Also, please check the sidebar for resources before making a post. 95% of the questions that are asked have been asked before or have been addressed. Seeing the same questions pop up over and over again make everyone cranky.

Previous megathreads can be viewed here.

Note: Approved sellers/makers are permitted to link their store in any thread as they wish as outlined in the advertising rules thread. Please report abuse of advertising privileges and/or very obnoxious advertising habits to the moderators.

Found this really good fidget spinner recently and I wanted to figure out what brand it was does anyone recognize this

I had a spinner like almost 10 years ago when they were first popping off that looked like the attached photo and I lost it but I can't for the life of me find another. It was metal, blue, and had these lighter blue splotches that looked like when you just sort of flick paint at something. I bought it from a hobby shop and it came in a black hard case. I think it had ceramic bearings and that's what sold me on it. Any help or direction would be greatly appreciated.

https://preview.redd.it/zc9n553pg8fe1.png?width=1000&format=png&auto=webp&s=8d2c7c3175f86912c7901bb59c942233ff8d3616

I was watching some spinner review videos on youtube and the commentator mentioned he doesn't like to take bearings out of spinners (if it is unnecessary). Why is that a bad thing?

Also, what tool do you use to do this? I want to get one so I can replace the bearings when I need to.

Example video with comment:
Metal Fidget Collection Update & Ranking | September 2024

I bought a fidget spinner from a random website on Instagram almost 8 years ago. I have recently been able to find them but unfortunately they seem to be selling clothes now and I cannot find a similar model ANYWHERE. I was hoping to either find one from here or even commission anyone here who makes custom 3d printed fidget spinners. They were glow in the dark and I miss it very much. I would appreciate any directions/advice. Thank you.

Hi Gang,

Looking to get a nicer spinner and have the opportunity to buy one of the following:

• Focusworks “The Thing” @ $80

• Woosah SS Double Header Zatfig @ $65

• Woosah SS Namaste mf @ $65

• Woosah SS mini ohana @$55

(The Woosah spinners are $20 shipping)

I can’t find much information on Focusworks, but what I do find is overwhelmingly positive. Woosah has a legend, but I don’t know if it still holds up. Would love the community’s thoughts!!

Bronze Attic by UQH🦀

Helpful hint: If your question can be stated in 1-2 sentences, it probably should be posted here.

Examples of questions that should go in this thread:

• "I live in (insert country here). Where can I buy spinners/bearings/caps/etc?"

• "Looking to buy my first spinner. What should I get?"

• "What do you recommend for a spinner that's under $____?"

• "I'm trying to choose between Brand 1 and Brand 2, which should I get?"

• "Has anyone purchased from Seller _______ before?"

• "Where can I buy bearings/bearing caps?"

• "What kind of bearing is this?"

• "Where can I buy (Brand) spinner?"

Also, please check the sidebar for resources before making a post. 95% of the questions that are asked have been asked before or have been addressed. Seeing the same questions pop up over and over again make everyone cranky.

Previous megathreads can be viewed here.

Note: Approved sellers/makers are permitted to link their store in any thread as they wish as outlined in the advertising rules thread. Please report abuse of advertising privileges and/or very obnoxious advertising habits to the moderators.

WTS ($130) Tungsten Grave Raven clone. A condition. DIY stonewashed finish and comes with a SS UQH button. Balance is excellent and it weighs in around 95grams (with W buttons). Unlike the original, the spinner can accept R188 bearings and buttons! Price is shipped to Canada/ U.S.

https://preview.redd.it/hikkkweox1ee1.jpg?width=1703&format=pjpg&auto=webp&s=2de2d565d38c926bbc5a123305d3295d48d518e5

ᔕpinFam of Reddit!
I'm Thrilled to announce that SacredSpins is Finally back to with the release of ‘Reed,’ a new spin on a classic design inspired by the beloved ‘Seed.’

REED BAR! — Sacred Spins

👁️REED👁️

THE XL VERSION OF SEED

FEATURING NEW ‘Lagoon’ BUTTONS

DROPS:
We will be doing a few scheduled small website drops to make the availability more accessible for some individuals and make quick shipping fulfillment easier

DROP DATES | TIME:
TODAY 6PM EST
WEDNESDAY 6PM EST
THURSDAY 12PM EST

SPECS:
Diameter:
59.8mm (long) x 27.8mm (wide)
Thickness:
(Spin-Body) - 12.5mm
(Buttons) - 17.65mm
Weight Full:
STAINLESS STEEL - 78.5g
COPPER - 87.8g

Finish:
STAINLESS STEEL (MACHINE FINISH)
COPPER (MIRROR POLISHED)

Buttons:
(NEW) ‘Lagoon’

PRICE:
$195 (SS & Cu)

INCLUDED***:***

● Serialized Certificate of Authenticity ●
● Loaded SS sheilded-10 ball bearing ●
● Spare “VOYAGER”: 10-ball bearing ●
● StickerS ●

Despite needing to take considerable recovery time from subsequent traumatic injuries of a broken hip & second-degree hand/arm burns we are not done with growing 'ᔕpinovationᔕ' just yet!

Quite excited to share with the community what I have been slowly working on in my absence!

~Jared~
ᔕᗩᑕᖇEᗪᔕᑭIᑎᔕ

I have a muyi space time that is probably due for a new ball bearing. It came with 2 replacements but is there a place I can get more?

Hi All,

I recently lost one of my spinners and put the other through the washing machine (don't ban me please). That started a deep dive into trying to identify a new spinner that would be fun. The market for spinners is so odd and unlike nearly all other consumer products. One of the aggravating features of the spinner marketplace is that it is so hard to get spinners. So many are sold out or no longer manufactured. I also cannot identify which are the "best" (i.e., consumer reports doesn't rate spinners). The LIC edamame spinners looked great to me after watching some videos. But of course I went on their website one day and they literally had no spinners (not even "sold out") and today they have a couple spinners but they are both sold out. Would anyone be willing to share tips on how to get a new LIC spinner?

New to the sub reddit but wanted to see if I could get some feedback. I make these out of brass and am curious if there is a market for this type of fidget thingy? Looking to do custom versions for people as well.

https://reddit.com/link/1i4c5j0/video/af8napguhsde1/player

I used to have a few different nice metal spinners, and my favorites were my Rotablade tristubby and my Zerofeud aluminum tricompass. Does anyone know if/where people still sell Rotablade and Zerofeud spinners?

If my spinner is wobbling is it the bearing or was the body warped when it was manufactured?