/r/Knife_Swap
Welcome to Knife_Swap! If you have any questions, please contact the mod team through modmail, accessible via a link in the about section. Please read the rules before posting!
Join us on Discord (unofficial).
Check out the Behind the Edge podcast by some of our users! (unofficial)
1. Ignorance of the rules is not a valid defense against rule breaking.
2. Until you have Junior Trader flair (1 flair), you may only post one knife at a time for sale or trade. This does not mean you can post multiple threads, each with one knife. Sellers with flair may list as many knives as they want in a single post, but please keep it to one post- exorbitant listing spam will be removed. Also remember, Moderators hold little control over bad deals, there IS a risk if you are dealing with a first time trader. Be cautious. If a trade goes bad, message us with what happened and proof. Click the little envelope by the list of the moderators to message modmail. Additionally, please do not post [META] posts without mod approval.
3. Every post requires a TIMESTAMP to show the items are in your possession, which is at least one photo of all item(s) that you are posting, with something with your reddit username (or other explicitly identifiable identification, like a date tattoo) and the CURRENT date handwritten (not digital) and shows any visible problems with the item(s). Please try to use detailed pictures showing any wear, but also note that your description carries more weight than pictures. BE ACCURATE when describing your knives. You must have at least one picture of the knife open so the blade is visible.
4. Format the title of your post along the lines of [WTT] (Trade), [WTS] (Sell), Make and Model of Knives you are selling- as an example, [WTS] Hinderer XM-18 3.0 Spanto, Quietcarry Waypoint.
Every post requires a detailed description. Failure to adequately describe your knife will result in mandatory partial or full refunds. A detailed description should include, at a minimum, if it's been sharpened, if it's dull/chipped, approximate number of owners, centering/lockup, scratches/snails, if it comes with the box/papers/accessories that one could reasonably expect from the factory, mods, etc... We cannot emphasize this enough. Here's an easy template you can copy and paste into your post:
Edge Condition: Factory/Sharpened (by who)/any edge damage like chips/currently sharp or dull
Ownership: First/Second/Unknown (At least Second)
Centering/Lockup: PICTURES, lockup percentage, centering
Body Condition: PICTURES, snail trails, scratches, screw damage, loctite
Box, papers, and accessories: Do you have everything that normally comes with it, e.g. a COA, CRK cloth, extra hardware, lanyard tube with lanyard? Or what's missing?
Modifications: None/Reversible/Irreversible/Anodization
Disassembled: Never/Yes/by someone else
All WTS posts should have a price. All WTT posts should list what they're looking for and an approximate trade value.
Users under 25 flair MUST use Paypal Goods & Services for their sales. Under NO circumstances are users under 25 flair allowed to take non-PP G&S for payments. Users OVER 25 flair MAY request payment via any other platform. Buyers do not need to be over 25 flair to PAY via other non-G&S methods, unless the buyer has less than 25 flair. However, if you do not feel comfortable paying non G&S, that is your prerogative, though you may lose out on the purchase. Users under 25 flair found to be requesting non-G&S methods will receive temporary bans as punishment. Please report any users requesting non-G&S under 25 flair.
The COST OF SHIPPING is the responsibility of each shipper (it must be included in the price of the item listed), unless agreed upon by both parties. This means you are responsible for anything you ship until it is received by the buyer, unless agreed upon otherwise. International users assume liability unless stated otherwise. It’s for these reasons we HIGHLY encourage the use of shipping insurance.
Once a sale is complete, it is mandatory to leave the prices listed in the post.
DO NOT DELETE POSTS. There is a 10 minute grace period- if the post is up longer than 10 minutes it is against the rules to delete it. If you have a typo in the title, you can delete (as long as it’s within 10 minutes) and repost. If the post is live more than 10 minutes, any changes will need to be made in the body of the post. (Mods can not edit titles)
When you complete (all items are delivered) a trade, sale, or purchase, be sure to use the confirmed transaction bot to get your appropriate flair. Click here to learn more.
5. Do not ask exorbitant prices for a knife. All knives here are technically used, we do not recommend asking MSRP or a price where it will be cheaper elsewhere. YOU WILL BE CALLED OUT ON THIS BY MEMBERS OF THE COMMUNITY! That said, please do not dogpile somebody over this. Be respectful, follow the golden rule. This rule ties heavily into rule eight!
6. When you post a knife and it does not sell (or get traded) and you wish to repost it, you must reduce the price (or trade value) by 10% or $25, at the seller's discretion. If you would like to repost your knife for the same price (without reduction), you may only post it again after one week. NEW USERS, if you post a knife that doesn’t sell you may post it again with a price reduction (stated above) OR you can wait five days and post a different knife penalty free.
7. Sales must be at least half knives (or explicitly knife-related goods like pocket clips or scales) in both total post value and number. One to one ratio of knives to gear is the maximum. Total value of the gear cannot be higher in value than the value of the knives. Clear attempts to circumvent (a kershaw leek for $500 and a pen) will be removed and the OP will receive a temp ban for attempting to circumvent the rules. Knife-related items include things like sharpening equipment, scales, pocket clips, hardware, or bearings aka stuff that is only used on knives. Lanyards, beads, and similar things are not considered exclusively knife-related. Bundles count as the number of items in the bundle, not as one "item". Use /r/EDCexchange for your gear!
8. Don't be a dick. Please use common etiquette when interacting with other swappers. Reply to offers and be respectful. Harassing and insulting will not be tolerated This rule ties heavily into rule five.
9. Want to buy a certain knife? There are weekly WTB threads posted by a moderator where you can post what you are looking for. Individual WTB threads will be removed and you'll be directed to the WTB thread. Please only post in the WTB thread once every two days maximum to avoid unnecessary spam.
10. Submitting links to Ebay, trading/selling forums or other external venues are not allowed.
11. Mods have final say over any perceived grey areas in the rules.
12. We require all users who use Package Forwarding Companies that ship out of the country to disclose this BEFORE making a payment to a seller. If you fail to disclose this, you will be permanently banned. We do not recommend any users shipping to Package Forwarding Companies use G&S as it adds high risk. Furthermore, any buyer who uses a Package Forwarding Company must noted that the seller is not responsible for the package as soon as it leaves their hands.
These are a nice way to give back to the community at large. The person running the raffle chooses a charity, and the entry to the raffle is PROOF of donation (screenshot of * confirmation email with value of donation) equal to or higher than the minimum specified in the raffle.
Our recommendation for these is that they have unlimited spots, because donating to charity is cool. Please keep entry prices reasonable. Make sure to research the charity.
Most importantly- have fun with these!
To draw a charity or giveaway winner, post on your submission as follows:
#
= number of raffle slots)/r/Knife_Swap
Bro Priced Trogon Need To Move Cmon guys full titanium and 20CV
WE Trogon- 150$ (was240$)
It’s been carried twice and was used to break down a box. There are a few very small snails near the tip that you can only see at a certain angle. Tried to capture in the album but they are very hard to see. Disassembled once to clean. Overall build quality is incredible and the action is buttery smooth. Perfectly centered and solid lockup. No Box but will ship in a pouch.
Timestamp: https://imgur.com/a/x7nvqjj
Got a few today for old times sake, no trades please.
First I’ve got a Jason grant jkal small custom fixie, 6-1/2” long and it’s the perfect minimalist fixed blade imo. 80CRV2 steel that hasn’t been used to cut anything. Compound grind with a nightmarish add to it. Real ultem, (not the fake shit you see around all the time) with black g10 on top. Excellent condition. Comes with CoA card. 170 135 120
Chaves scapegoat street. From the first run not this most recent one. M390 blade steel, factory edge that may have cut like three pieces of tape, carried maybe twice. This one has been modded by Sean Campbell. Cerakoted black scales with a hand rubbed cross hatching that came out amazing. Lightly Black oxide blade (very hard to tell in pics & vid but it looks amazing) all hardware has been black oxide as well. Skull crusher added that had been polished and blackened to match the scales. Action is phenomenal and cross hatching is smooth in hand. Comes with non skull clip,original backspacer which are also both blackened but only the clip is crosshatched & box. 350 285 260
Tasca tools boomboxer knuck in blasted Ti, has been carried very minimal. Could be a nice piece to mod, Comes with a nice leather pouch & CoA. https://imgur.com/a/SfBjsr650 45
Add on: null sentry pouch, never used or carried so it’s in excellent condition, not much to say about this one. Free with any purchase https://imgur.com/a/rBFTxwh
No trades, PayPal FF with no notes or Zelle. I will ship these items via USPS within the US by Thursday at the latest. If you yolo please chat/dm promptly.
Timestamp https://drive.google.com/file/d/1gqvT8KjG6qmmxJCg0QOQL67N95f2V0OJ/view?usp=drivesdk
Video https://drive.google.com/file/d/1h-iEXT6XcpZzQxLQA2Scrj_Yt9awYMWF/view?usp=drivesdk
Pics
https://drive.google.com/file/d/1grc2Z4u77A-XC-QOwLrufnX68xdSONfH/view?usp=drivesdk
https://drive.google.com/file/d/1gvXSC6UhzEbGax3oA7Y24HrAXZHSW7yR/view?usp=drivesdk
https://drive.google.com/file/d/1h4d10VeqtwbcCWoECQxRHQoM05G1GGhB/view?usp=drivesdk
https://drive.google.com/file/d/1h2ioB8PZk1bFLpobaENpub9dr99O16ft/view?usp=drivesdk
Good afternoon, swappers. I need a little cash to get me till payday, so I have for your perusal a brand new in box, Kansept Model 6 Unused and uncarried. It has a cpm 20cv blade, green camo carbon fiber scales, and everything it came with. This knife sells for $150 at any major retailer. I'm asking $90, obo. Great deal for a great premium knife. Will send a video or further pictures upon request, Imgur has been crap today.
I'll ship the day after payment is received. PayPal Friends and Family is the best payment method. No notes at all.
Thanks for stopping by.
I am selling my Maxace Black Mirror for $115 shipped
Timestamp: https://imgur.com/a/k0BtneV
Maxace Black Mirror https://imgur.com/a/Url2CKs
M390 Ultimate Sheepsfoot Titanium scales with carbon Fiber Inlay Small scratch on clip and next to clip below screw Never cut $115
Reason for selling: I want to get a workhorse. This m390 blade should outlive any of us, but it just feels too nice for me to DARE use. I still carry my daily in my bag and pull that out instead of using this, and it feels silly.
YOLO is king. Headed to the post office tomorrow. All prices are shipped via USPS in the 48 continuous states only. All knives are perfectly centered other than the Nerd, which ever so slightly favors the clip side.
REX45 Shaman - no cut no carry. Comes with Lynch clip but no factory clip. Box and docs included. $225
2nds S30 Shaman - no cut no carry. $160
2nds Lil Native - 1 stripped scale screw, no cut no carry. $70
TRM Nerd - original without hole. Reverse flicks easily. Light use, faint marks on clip. Box and docs included. $110
Pena Barlow - carried and cut. No box or docs. $160.
Custom S90 fixie by Brass Brigade - knife only, shaving sharp. $100
CIVIVI Sokoke - no cut no carry. Box taco stickers etc. Also includes a new CIVIVI tI clip. $55
M4 Native Chief - sold to me as no cut no carry. Looks it save for some faint scuff on blade. It looks like the previous owner wiped it down with a rag that had some grit on it. Only noticeable at a certain angle and in a certain light. $170
REX45 Native Chief - carried but still on factory edge. Box and docs included. Comes with a Lynch clip but no factory clip. $160
TRM Atom - catch and release. Box and docs included. Sharpened (very sharp) by previous owner. $170
Only trades I am interested in:
Sprint/exclusive Lil Natives
ZT 0640
And one more that I can’t remember…
TIME STAMP
Both of these have been bought from one owner individuals and have not been sharpened, carried or disassembled according to their word-
The dragon scale Rask is generally $1300 and above on the secondary market when you can find one and Shiro 95T turtle is the same or more.. these prices are insanely cheap for anyone who wants to add a nice investment to their knife portfolio his your opportunity!!
RASK Dragon
SV 880
95T Turtle
SV 790
US shipping and residence only and NO RESHIPPING...Payment is PayPal F&F NO NOTES
You are responsible for knowing your local knife laws WITHDRAWN - MEMBERs have spoken
Timestamp-https://imgur.com/a/IzQb4tQ
Hinderer XM-24-s45vn swedged spear. Knife hasn’t been carried or cut. Skiffs have been installed as well as a working finish horse head ti scale and full working finish hardware swap. Comes with original hardware and blue/black g-10 scale. Original box,tactical peanuts and triway kit as well. Selling as pictured will not separate. Price-$725 ppff shipped conus. Vid-https://i.imgur.com/Vcpm5v2.mp4
Hinderer Project X- Purchased new by me straight from the ranch.S45vn blade steel. Scale was removed,skiffs installed as well as the battle blue ti scale. Never cut or carried. Comes with original blue g-10 scale,triway pack,tactical peanuts and box. Selling as pictured will not separate. Price-$675 ppff shipped conus. Vid-https://i.imgur.com/AhG6xPC.mp4
Demko Ad20S full factory textured ti,20cv drop point. 2nd owner,original owner never cut or carried. I cut open a couple boxes with it. Original edge is factory sharp. I did remove the show scale and install Skiffs. Comes with original box. Price-$725 ppff shipped conus. Vid-https://i.imgur.com/JGe0e3d.mp4
Demko Ad20 full factory textured ti,full flat grind sharks foot in 20cv. Brand new and untouched. Never cut or carried. Comes with original box. Price$750 ppff shipped conus. Vid-https://i.imgur.com/g7rtXZ3.mp4
Unfortunately have to part with this. This is a Facebook exclusive with dlc. Never been carried or cut with. Has been opened a handful of times. There is a faint scratch on the show scale. Original owner, comes with everything including the coin.
Sv 450 425 400
No trades
Selling some really nice things I thought I wouldn't ever part with due to some medical expenses. ALL purchases come with some free ranger eye/PVC patches also since I have too many and maybe some GFuel packets 😂
SOLD Pelican 1170 Case: Used for a month or so, added loop to under the top foam since I like adding patches there but is a easily reversable mod if you want it gone, makes for a slightly snugger fit which I like also, basically unchanged though. No visible wear or sticker residue or anything as I never put any on. Comes with a custom hank that fits in there too but is ever so slightly uneven but is a nice layer of protection. Original owner, bought direct. Paid $110 after shipping and not including looping and hank which were more, asking $90 shipped in original box. SOLD
SOLD Quiet Carry Waypoint LC: I loved this thing for a long time, but don't find myself grabbing it anymore. I disassembled to clean it up a bit and add some nano-oil and tune it to perfection. I carried for a while but only wear is a tiny bit on the Ti liners near the backspacer, blade is pristine and wicked sharp, solid lockup, centered, great washer action that only gets better with time. I bought extra hardware for it too for the silver hardware/black scales look I like but will come with it and spare black clip. Original owner, comes with original box and card, incredible knife that fills and fits the hand very well but carries much smaller than it is, big slab of satin Magnacut blade with a tall grind making it a great slicer, chef's kiss 🤌 Have like $350 in this one I think, asking $300 shipped SOLD
Varga VBR MkIV Large: One I thought I'd never sell but also have never carried. Mark is a great dude and designs insanely good knives with this being his latest release and iteration of his VBR. Something about these always spoke to me but I can never bring myself to carry them so may as well move it on. Original owner as I bought direct on the limited drop, right hand version with CF scales, GORGEOUS compound ground M390 blade, has Skiffs installed also that make it just glide shut so easily. These are slept on way too much, extremely ergonomic and usable forward finger choil, perfect pocket clip retention that's unobtrusive, damn near perfect knife in my opinion. Feel free to buy this and beat on it for a lifetime, it can take it and look good at the same time. Centered, stupid sharp edge, typical Reate build quality. Mark Varga is very reachable and down to earth if you ever have any issues also, great customer service. Comes with box, branded pouch, COA, and original bearings. Again, asking less than I have in it, asking $335 shipped
No trades please, no PayPal notes, USA only. Feel free to PM for more info, photos or videos, or with offers. Item ships from rural WI, USA via USPS. Payments received via PayPal F&F or Cashapp.
Thanks for looking!
Timestamp: https://imgur.com/ceZwWwi
Pics: https://imgur.com/a/green-thorn-lee-kickstop-m390-IlaKBx7
Green Thorn Lee Kickstop M390 SV $195 PPFF
For sale (NO TRADES) is a like new Green Thorn Lee kickstop in M390. Has roller bearings in steel cages. Has been cleaned and lubed but otherwise unused. Blade is slightly off center. Comes with pouch and screw tool. Ships USPS Priority to US only.
Timestamp: https://imgur.com/a/gSjPeqM
Twosun TS432
Brand new, never cut or carried, original owner
$75
Sencut Watuaga
Brand new, never cut or carried, original owner
$35
or buy both for $99
Spyderco Military (1st Gen) Black S30V Factory Seconds
-Decent Condition S30V steel military original factory seconds. Carried a good amount so there is typical wear. Edge is original and still pretty sharp but there are a few small chips here and there. Action is good and blade centering is pictured.
Asking $100 $80
Spyderco Paramilitary 2 S30V DLC blade
-Well loved PM2 with a black DLC S30V blade swapped into the maxamet gray scales. The blade finish has its fair share of scratches but the edge is factory (still sharp). Action is good with a little bit of typical compression lock stick. Blade centering is pictured and just a touch of side to side play at the cost of dropping free. Also pictured is some damage to the scales. Asking $100
Timestamp: https://imgur.com/gallery/X3AHjDt
Microtech UTX-85 II Signature D/E
Great condition, fires hard, minimal pocket carry. Beautiful knife, the UTX-85 is just a tad too small for me. Factory edge
$190 Shipped Video: https://imgur.com/gallery/qSx1rfF
Protech Godson BLK/BLK
Great condition, a few small snail trials on handle, tip is needle sharp. Factory edge
$115 Shipped Video: https://imgur.com/gallery/gExBEEa
Up for grabs is my cfk fif20ti
Second owner Factory edge Skiff bearings Some snails from light pocket carry Centering is perfect Blade is unmarked Everything included, carrying pouch, factory bearings, spare parts, warranty card and sticker
SV$375
Preface: Payment via PayPal goods and services. Shipping via USPS priority mail. U.S. only. No trades (unless you want to trade me a Michael Walker or a Ron Lake, lol). Neither f the knives have boxes or papers, but each will come in a nylon pouch. Thank you!
Timestamp: https://i.imgur.com/p71yVL9.jpeg
Spyderco Calypso: VG10. Smooth, no detent but stays securely shut, solid lockup, very sharp, centering a little off to the left. Some extremely light scratches here or there but very little in terms of signs of use. These are very rare! $180.
Photo album: https://imgur.com/a/pwSrPQJ
Beauty shot: https://www.instagram.com/p/C351gnbv42r/?hl=en
Benchmade Taggedout: CPM 154. Smooth, again no detent but stays securely shut, solid lockup, very sharp, blade well centered. AWT scales, anodized I believe. A tiny blemish in the stonewashed blade on the show side (see photos), it’s just cosmetic. Some wear on the clip. Other than that in great condition. A laser. Does not have original scales. $140.
Photo album: https://imgur.com/a/qmhc0aa
Beauty shot: https://www.instagram.com/p/C351gnbv42r/?hl=en
Hey swap!
Today I have a para 3 LW salt that is wearing blue anodized AWT scales and bronze titanium hardware from AWT. Has been carried, cut, and sharpened. 1st owner on blade and hardware, second on scales. Blade has a dent(?) up near the hole on show side. Was there when I got the knife. One small ding on the scales. Asking 200 Will come with original hardware but no original scales as they are no longer functional.
Full disclosure, I snapped the original scales in two while the knife was fully assembled. Nothing was damaged besides the scales. Despite what people seem to think, this didn’t take nearly as much force as it should have.
YOLO over Chat.
Feel free to ask any questions/Concerns.Also I can send more pictures or videos upon request. Not looking for trades at the moment. All come with their boxes.
SV 180$ ZT0920 Second owner fantastic flipper, these are discontinued now so they're not that easy to find. Some light wear and tear on the handle.Knife doesnt appear to be previously sharpened. Missing lockbar screw .CPM 20CV
SV 350$ Heretic Colossus black Tanto DLC LNIB has low serial number, razor sharp, under 50 cycles and has everything they came with from factory and with box cpm Magnacut
SV 135$ Reate Exo K Blade is brand new comes with trainer has not been used comes with box and everything that Reate includes in the box
SV 160$ Benchmade Mediator Im the second owner of this knife knife is still basically like new I have just used it to cut paper and previous owner sold it to me new. Knife is in perfect condition with strong bring on deployment.Has been deployed a few times.
SV 190$ Microtech Ultratech II OTF Knife D/E Step Side Black Aluminum Knife is in good condition clips has a little bit of wear to it has never misfired and hasnt been used to cut anything besides paper.M390 STEEL.
have an older leatherman that's in really great shape. The blade doesnt look like it's been sharpened or cut with. I am the 2nd owner. Looking to get $40 including shipping. Will consider trades
Preordered this back in January and my tastes have changed so i’m going to just let someone grab this under retail.
Benchmade Adira: Bnib full size Adira, it’s a really good example of what Benchmade can produce and what they should be making. Fit and finish is like what Benchmade was 10 years ago, but with updated steel choices. SV $210
Hey everyone, I'm re-posting a couple leftover from my last post with some price drops. Let's get these knives homes!
- Please read descriptions and see pictures/video for condition details, ownership, disassembly, etc.
- Yolo trumps all, chat preferred over PM for questions/offers. Prices are OBRO. Please comment prior to chat/PM.
- I accept Paypal F&F (preferred), Venmo, or Zelle. No trades please at this time.
- Shipping within the USA via USPS Ground Advantage, USPS Priority, or UPS Ground at my discretion (PO boxes will receive USPS service as is required).
Pena Raptor XL - Ti/black micarta inlays/Zirc pivot collars / Satin M390SV - $230 NOW $207
Numerous owners on this one, I think I'm the 4th. Never disassembled to my knowledge, but has been carried a couple times by myself and at least one of the prior owners. There is a small snail at the corner of the inlay on the clip side scale, otherwise this knife is flawless everywhere else. Solid lockup, top flipper works great and has excellent jimping. Perfect centering and sharp factory edge. Blade drops easily on disengagement, but needs a little wiggle to close. Includes original packaging and a cleaning cloth.
Kansept Shikari SBL - Black micarta/black aluminum bolsters / Blackwash 154CMSV - $40 NOW $36
Catch and release, I'm the 2nd owner. Prior owner disassembled to adjust spring tension but did not use or carry. Personally I think the spring tension is too soft now, and the flipper can be easily failed. But, it also deploys reliably as long as you're deliberate. There are a couple little chips in the G10 backspacer, and maybe a hairline scratch in the blade on the show side, or it could just be an anomoly from the blackwash. One tiny mark on the clip too. Scales and bolsters look clean, some patina on the micarta from handling. Centering and lockup are good. Factory edge is ok, edge bevel wanders a little bit but it's a perfectly useable edge. Super smooth action and falls easily when the button is pressed. Includes all original packaging.
Edit. Timestamp. https://imgur.com/a/YolHVkH
I found this Crooked River custom in a used gear shop in Portland Oregon. It’s a black coated 20CV blade with all black steel furniture and a deep carry pocket clip. I cleaned it and it feels wonderful smooth to work, and took a lovely edge. It has a few dings in it and didn’t come with a box, so I think $230 is a fair SV.
WTS:
A) Spyderco Dragonfly 2 (SV$55) SOLD
Spyderco Delica 4 with two extra titanium clips (SV$80) SOLD
C) TakCom Stinger (SV$55)
All shipped USPS Conus and PPFF only.
Selling three great knives here. All of them come with their original box and have been barely used or carried. I am the original owner of all of them.
A) Dragonfly 2 - very light carry. VG10. Might have cut a box or two? It comes with all the orignal packaging, and I don’t see any issues with the blade or scales SOLD
B) Delica 4 - VG10. Very light carry (maybe once?). It hasn’t been used to cut anything. Comes with two titanium deep carry clips (as seen in photos) that I picked up on eBay. It also has the unused OG black clip. All original packing etc. SOLD
C) TakCom Stinger - it’s been carried around the house and fired a bit, maybe opened 2-3 boxes. 154cm blade. No marks that I can see. Comes with the original foam-lined plastic case.
Timestamp and Photos
YOLO Takes Precedence!
Payment via PayPal Friends and Family, Zelle, or Cash App
Shipping included in the US
Please make payment within 30 minutes of commenting YOLO or the item will be offered to the next in line (if applicable).
Please reach out with any questions or if you'd like additional photos/videos
SOC V4 J-Cape w/ Blood Money Inlays & Zircuti Thumbstuds/clip/backspacer
SOC V4 J-Cape with some awesome bits on it. This one is a "ringer", which some folks seem to prefer. Blood money inlays with Zircuti thumb studs, pocket clip, and backspacer. 20CV blade in perfect condition with solid lockup, favors show side by a hair. Blackstone wash scales also in good shape with what may be a bit of wear from handling, difficult to differentiate between wear and the factory finish on this one. I am the second owner, and it's never been cut with or carried. Comes with extra lightning bolt pocket clip, hardware, and box/COA.
$450 shipped - No trades please
#Price Drop! Benchmade Mini Presidio II
SOLD SOLD SOLD SV: $153
575GY-2001, 2020 Shot Show Limited Edition number 296/1000. Gray coated CPM-M4 blade with Bronze aluminum scales. Has been carried sparingly and cut a box once. Third owner, never sharpened. One good ding on the shoulder of the scales shown in picture. Some snails on the clip. Blade is in very good shape and centered. Has been lovingly disassembled once to clean/lube/inspect. Includes box, and all the original stuff.
Shipped in US only. Paypal F&F, Zelle, or Apple pay. Just looking for funds, not interested in trades.
lnib native 5 with deep carry clip https://imgur.com/a/phJ2O1p
never sharpened
carried once to the gym decided it wasn't for me
TV:150 negotiable as all trades
not sure what I'm looking for but just looking for something else mainly spydercos though but anything goes bonus points for a nonstainless steel :)
WE Trogon- 170$
It’s been carried twice and was used to break down a box. There are a few very small snails near the tip that you can only see at a certain angle. Tried to capture in the album but they are very hard to see. Disassembled once to clean. Overall build quality is incredible and the action is buttery smooth. Perfectly centered and solid lockup. No Box but will ship in a pouch.
Album and TS: https://imgur.com/a/EZJBVwA
Not looking to trade, but if it doesn’t sell, may be open to it (Cortex XL?). PPFF, Venmo, Zelle, CONUS. Thanks!
Spyderco PM3 DLC CTS-XHP Orange G-10 C223GPORBK
Box and Dear Spyderco Customer letter included.
Never Carried / Never Used.
Condition: New
Doesn't appear to have any imperfections.
Action is good for factory, opens and closes easily.
The centering looks spot on.
First owner.
PP G&S
$210
Spyderco Military Burnt Orange REX45 C36GPBORE
Box and Dear Spyderco Customer letter included.
Never Carried / Never Used.
Condition: New
Doesn't appear to have any imperfections.
Action is normal for factory, opens and closes easily.
The centering looks spot on.
First owner.
PP G&S
$250
I have a full dlc Griffin Scout f3.5 for sale or trade today. This is one beast of a knife. Incredibly smooth action with incredibly comfortable ergos. Made by Bestech and they did a phenomenal job.
SV: $285 TV: $330
Cash can go on top of trades either way necessary. Will look at others not on my list but I reserve the right to be picky.
Trade interests:
SV: $285 TV: $330
Hey today I’m trying to sell this bad beast, I got some medical bills piling up and need to be responsible…
Sv: 315$ ppff Venmo sold
Anodized purple scales and custom purple rain cf inlays! Comes with the original micarta. Only issues to note is some light scuffs on the pivot and backend of the show scale, I tried to note this in the pics. I have never personally carried it or cut with just flipped around the house. Flips like a dream and goes easy in the pocket!
Blade steel: stonewashed m390
Owners: 2 owners