/r/LightsaberBST
Welcome to /r/LightsaberBST, a sister subreddit to /r/Lightsabers for buying, selling, and trading lightsabers and lightsaber related accessories.
Vendors and individuals are both welcome to post sabers they have available for sale or sabers they wish to buy.
Sales, new product offerings, and services offered are also welcome here. All users are limited to 1 post per 24 hours. As always, be nice!
Welcome to /r/LightsaberBST, a sister subreddit to /r/Lightsabers for buying, selling, and trading lightsabers and lightsaber related accessories.
Vendors and individuals are both welcome to post sabers they have available for sale or sabers they wish to buy.
Sales, new product offerings, and services offered are also welcome here. All users are limited to 1 post per 24 hours. As always, be nice!
/r/LightsaberBST
2,417 Subscribers
Savis Workshop sabers second hand
Considering my collection of lightsabers, which includes sabers ranging from Ahsoka's Galaxy's Edge lightsabers to Korbanth sabers and a Sabertrio masterpiece, I am wondering if purchasing a Savi's Workshop lightsaber from a third-party seller is worthwhile. I have found vendors who will build and ship one, but I am unsure if the cost is justified. I own every kyber crystal from Dok-Ondar's Den, including the three rare ones, and I am considering a Savi's lightsaber, since I cannot visit the workshop myself, to complement my collection of crystals. However, I have heard and seen mixed reviews; any advice would be wonderful.
16:16 UTC
Selling 4 SaberForge Sabers, 1 Stand, 2 Carry Bags
I am amidst decluttering my home.
I have a collection of SaberForge sabers I am selling. 2 Sabers are Veteran tier electronics. 1 Is the early Veteran tier electronics that only has like 3 sound modes, and 1 has no sound board and only a light.
All in working condition.
Each of them includes a 32 inch blade and a charger. (4 blades / 4 chargers)
The stand has multiple light settings, can be multiple different colors and has multiple blinking modes other than just solid.
Would really like to sell the whole lot together and be done with it but i realize this may not be realistic. $600 plus shipping cost for the lot. Message with offers.
Gladius, Yellow, Veteran Tier Electronics, $200 OBO
Phoenix, Green, Veteran Tier Electronics, $200 OBO
Commando, Early Veteran Tier Electronics, $200 OBO
\"I forget this sabers name\", Orange, No sound board, $100, OBO
21:30 UTC
Where can I sell those?
Hey everyone! So I'm moving out in a few weeks, and I cannot leave anything at my old place, so I'm looking to sell basically everything I own. Which includes two sabers. An Artsaber Ghost Neo Pixel Blade Lightsaber with the SN-Pixel card (https://imgur.com/a/h6gr4oA) and the Reva Sevander saber from Ultimate Works (https://imgur.com/a/ctxlnJa). I put them both on ebay and on the facebook marketplace, but they are not selling at all and I need to get rid of them asap. Do any of you guys have ideas? (btw they are both new with everything they came with and I am selling those two for 350cad and 800cad respectively. I can ship!)
18:51 UTC
Satele Shan Saber Staff in Polished Gold
The Satele Shan Saber Staff design is probably my favorite (although I think some prongs/fangs on the emitter would be a nice addition). However, I think it would look really good in a non-weathered, polished gold appearance. Korbanth probably has the best version of this design, but to my knowledge, they allow no such customization. I think the UltraSabers variant has a gold option, but it, frankly, just doesn't look very good or accurate. I know SaberForge offers powder coats, but they do not offer a Satele design.
Is there anybody that offers a design similar to what I have described? Would it be possible to get the Korbanth hilts empty, have them powder-coated from some 3rd party, and then installed? Is there anyone that offers powder coats for hilts that are produced outside of their vendor?
23:55 UTC
89Sabers Skinnyflex chassis
where can I buy a crystal chassis for the 89sabers skinnyflex saber
01:18 UTC
Qimir SE lightsaber It's ready！
09:18 UTC
89 Sabers - Anakin Ep3
Anakin Ep3 from CC Sabers Proffie V3.9
All electronics work as intended
Comes with 36in neopixel blade, external charger, saber bag, blade plug, display stand, display pommel cap, hard carry case
$450 $425 - Paypal
Willing to ship anywhere in Canada & US
22:49 UTC
Selling two new Plo Koon Legacy Lightsaber Hilts from Disneyland’s Galaxy Edge
Hello!
I have two Plo Koon Legacy Lightsaber hilts from Disneyland’s Galaxy Edge for sale. Both are brand new in box with original seals intact.
MRSP is $169.99 each. I am asking for $135 via PayPal for one or $250 shipped for both or best offer. Shipping is included within the continental USA.
Disney store link for reference - https://www.disneystore.com/plo-koon-legacy-lightsaber-hilt-star-wars-galaxys-edge-400945566614.html
I have over 170 completed sales and trades in the Pokémon card subreddit r/pkmntcgtrades. I will provide shipping and tracking information within 3 hours of receiving payment.
Thank you!
18:32 UTC
Wanted: LamaDiLuce Polaris SSE-1 Hilt
I am trying to find an older model of the Polaris saber by LamaDiLuce, the longer SSE-1. I am specifically looking for one in the matte black or dark grey, not silver/aluminum. I am not worried about cosmetic damage at all assuming it does not impact function/use.
00:22 UTC
📦 The ULTIMATE Lightsaber? ⚔ NSABERS Maul Review 👹
02:03 UTC
Limited run Sabers
Hello all,
I have a couple of handmade sabers (made from PVC) available, only 4 made. Both will come with removeable PLA+ chassis made to hold a 21700 battery, 28mm speaker, kill switch, Golden Harvest v3 board with a seedling chip, and a magnetic switch dual holder (holder included). Additionally, they come with a crystal chamber made to hold opposing single accent LEDs with brass accents and a quartz crystal (also included). They accept a 1” blade, I hope everyone likes them. Looking to get $120 each or (OBO), install available if interested as listed above. PM me if interested.
MTFBWT
01:55 UTC
Saberforge ASP Avenger shroud
Looking to buy at least 2 ideally 3 of the silver shroud from the saberforge Avenger ASP emitter for my custom build
18:13 UTC
WTB budget dueling sabers.
As my kids are getting older (8-10) id like to get upgrade them with better lightsabers but im not sure where to start. They also told me recently they wanted to start cosplaying and wanted different ones than the big box stores have.
As of budget there really isnt one. But since they are young I dont want to get anything terribly expensive.
21:50 UTC
Cyber Week Sale on Custom Neopixel Blades!
It’s Cyber Week!
This week only, take 15% off of any length custom Neopixel blade!
Over on the Etsy shop, use code: THISISTHEWAY
16:41 UTC
Opinions to Help with Decision
20:54 UTC
WTS Korbanth Darksaber TheDark sword/saber- saber hilt - Proffie with included N-pixel blade
Installed TheDark sword/saber- saber hilt - Proffie with included N-pixel blade
Paid $700 from Korbanth. Asking $400 shipped PayPal G&S OBO.
05:49 UTC
07:53 UTC
WTS: Graflex Xenopixel and Vader E5 Proffie Neopixel
Reposting this for visibility, sabers are still available.
Darkwolf Sabers Graflex: $300 USD obo. Price does not include shipping/PayPal fees. Shipping to CONUS. Blade can be included.
(Copied from Darkwolf site)
Xeno Pixel v3 - Bluetooth
- * darkwolf blade v3 Bright 50w RBG color changing pixel setup with Wolfpixel blade
- * Mobile App Capable
- * Accent Swings
- * Smoothswing
- * One button configuration
- * Programmable 16gb SD card
- * Preprogrammed customizable blade effects
- * 34 fonts preinstalled
- Removable Blade
- deep sleep adjustment
- flash on clash toggle on/off
- Blade brightness Adjustable
- Audio Cue for Hilt Commands
- Gesture Control Adjustable
- Xenopixel V3 board
- Bluetooth
- Smooth Swing
- Multiple colors
- Blaster Block
- Tip drag
- Flash on clash
- Multiple Soundfonts
- Melt
- Spin
- Force Effects
- drag effect
- Multiple Bladestyles (more in future firmware
- postoff
- preon
- lightningblock
- beginlightingblock
- endlightingblock
- Stab
- Pre in
- side out
- Multiple ignition styles
- Duel ready
Darwolf Sabers Graflex: $375 USD obo. Price does not include shipping/PayPal fees. Shipping to CONUS. Blade can be included.
(Copied from Padawan Outpost site)
Darth Vader inspired saber from Episode V Empire Strikes Back
- Proffie V2.2 board
- Hilt Length 29cm
- Default blade length 36"
- Blade diameter 1"
- USB-C Charging
- Battery is easily removed for exterior charging
- Includes charging cable, stand, screws and hex key
20:33 UTC
Web sidious lightsaber, preferably ghv3/4
As the title says, looking for a Darth Sidious lightsaber, preferably a GHV3 or 4, but open to snv4 or xenopixel 3.
Local to austin if it matters.
20:58 UTC
Still seeking ASP part
19:37 UTC
A lot of MHS hilt parts for sale at a discount
Due to a massive life change, I'm moving and selling my saber crafting supplies. You can check my post history to verify that I've been doing this for a while, so it's not easy to give it up. The first lot for sale is a bunch of MHS hilt parts along with kill keys, grips, screws, activation boxes, pommel inserts, etc. I'd estimate the retail price for all of these parts to be about $500. Looking for $250 OBO. I'll accept whatever digital payment method is convenient for you. I'll provide tracking on the shipment to the US. If you are international, I'll likely charge for shipping.
Thanks for helping me out so these parts just don't go into the trash when I move.
20:33 UTC
WTS: Darkwolf Sabers "Infamous Graflex" Xenopixel/Padawan Outpost "Vader E5" Proffie V2.2 Neopixel
Darkwolf Sabers Graflex: $300 USD obo. Price does not include shipping/PayPal fees. Shipping to CONUS. Blade can be included.
(Copied from Darkwolf site)
Xeno Pixel v3 - Bluetooth
- * darkwolf blade v3 Bright 50w RBG color changing pixel setup with Wolfpixel blade
- * Mobile App Capable
- * Accent Swings
- * Smoothswing
- * One button configuration
- * Programmable 16gb SD card
- * Preprogrammed customizable blade effects
- * 34 fonts preinstalled
- Removable Blade
- deep sleep adjustment
- flash on clash toggle on/off
- Blade brightness Adjustable
- Audio Cue for Hilt Commands
- Gesture Control Adjustable
- Xenopixel V3 board
- Bluetooth
- Smooth Swing
- Multiple colors
- Blaster Block
- Tip drag
- Flash on clash
- Multiple Soundfonts
- Melt
- Spin
- Force Effects
- drag effect
- Multiple Bladestyles (more in future firmware
- postoff
- preon
- lightningblock
- beginlightingblock
- endlightingblock
- Stab
- Pre in
- side out
- Multiple ignition styles
- Duel ready
Darwolf Sabers Graflex: $375 USD obo. Price does not include shipping/PayPal fees. Shipping to CONUS. Blade can be included.
(Copied from Padawan Outpost site)
Darth Vader inspired saber from Episode V Empire Strikes Back
- Proffie V2.2 board
- Hilt Length 29cm
- Default blade length 36"
- Blade diameter 1"
- USB-C Charging
- Battery is easily removed for exterior charging
- Includes charging cable, stand, screws and hex key
18:51 UTC
Black Friday Sale. Take advantage, our prices are increasing 2025!
06:50 UTC
Friendsgiving discounts from Corvus Saber Foundry!
VHC and TXQ Modular compatible parts! Unique parts found at no other vendor. Right here at:
22:05 UTC