/r/LUXEpaintball
This subreddit is for the discussion of LUXE Paintball, Products, Designs, 3D printing help, and anything LUXE Paintball DLX Technology Group
This subreddit is dedicated to news and discussion discussion of Inception Design Markers, Products, Designs, 3D printing Inception Files help, and anything LUXE Paintball.
All posts are welcome! Questions, Gear Setups and Photos, Events, Meetup suggestions, memes, and anything LUXE Paintball related is encouraged.
Official LUXE Paintball Sites:
Paintball Related Subreddits:
/r/LUXEpaintball
Anyone know how to create your own startup sounds for a tm40? I saw the voice editor for the 2.0, will that work for the tm40?
It's supposed to rain in a few days when I wanna go play but I don't wanted to know if the luxe would be ok with the rain and not give me problems with it I'm not submerge my gun but I was wondering if it's like a constant decently hard rain would it screw with the tm40 mess with the board ect
Looking into coming back to the sport, and as part of it i need to revive my luxe oled. Can anybody recommend an oring kit besides the OEM one?
I’m trying to refurbish my v1 Luxe that has been working flawlessly for over 15 years and I would like to know if anybody knows where to get the following parts:
I’m only looking for original parts not looking to upgrade anything, ideally in EU or shops that can deliver oversea.
For the story this is number #124 that came out of the factory, it came with the maxflo as new. I don’t play that often nowadays (once per year) but used to use it twice per week back in the days. It had several sets of o-rings and eyes replaced but never had an issue or leak.
Does anyone have any Luxe X accent kits they would be willing to sell? I’m looking to replace my Polished Black parts. Thanks!
has anyone tried tm40 grips on an ice, do they fit? i wanted the snap grip screws for my ice grips and i don’t know if they’ll work or not.
Hello. How would I set the board up to play in compliance with the new NXL mode?
Hi all.
I am in the process of swapping the stock ICE bolt for the encore bolt. I’ve taken the colored back cap off the stock bolt but I can’t seem to get the rest of it unscrewed from the stock bolt to swap over to the encore.
I purchased this marker used to I’m not sure how old it is but I’ve tried several methods and it still won’t budge.
Any advice or idea on how to remove this piece would be great!
TIA
Just purchased wanted to set the bps limit to 10.5 nxl mode but its showing 10.3
any help is appreciated
I’m looking at buying a Luxe Ice, looks like parts are still readily available for them. Do you guys know or feel like that will be the same in the next few years? Or does buying a ICE going into 2024 not make sense?
I have a Luxe X and wanted to change the voices. I'm a Mac user, so I downloaded Crossover to run the DLX software. I'm hoping someone here can help guide me on how I can make this work. I'm not interested in getting a new computer. Here are my two issues:
Thanks!
Would tm40 grips fit a luxe ice?
so i’m looking for a accent kit for a tm40, i can only find them for a luxe x, would the kit fit on a tm40? or would i need to find someone selling loose parts
Has anyone had any issues doing the firmware update to thier TM40? I updated my firmware and the gun hasn't been right. My shot counter disappeared and my screen is cut off. You can barley make out it says luxe at the bottom
will the old x front grips fit if i buy em or no?
Trigger was sticking throughout points and had to push it forward a bit to reset it. Took it apart after that weekend and adjusted all 4 of the screws and the sticking is not happening but the trigger itself just feels off. Impossible to walk on it. Any ideas?
I'd like some general tips/tricks and/or hacks for the TM40. Things like SETTINGS and/or general adjustments, must have upgrades such as triggers/bolts (F16) and placement of athletic tape on the marker. I have seen some people put electric tape around parts of the barrel (what's the purpose of that)?
Also, what is the best way to clean your bolt? Lastly, how do you make the trigger pull as light as possible?
This isn't a specific list... I want to get fellow TM40 owners together to talk about what has worked for them in terms of tuning their markers to perform optimally.
Hi guys, just bought a TM40. Do you know where I could find a F16 bolt. The seem to be sold out everywhere
Does anyone know of any reputable dealers/websites that have Adrenaline Luxe TM40’s in stock. I’m trying to buy a couple but it seems like they are practically sold out on most websites.