Hi, I used specific shortcuts on complication. Now I noticed, that I can only select app shortcut for complication. I thought I can use a specific shortcut to start. I’m wrong or is it changed? Thx.

I can’t seem to find out exactly why, but my battery has been draining extremely fast this last week. The first week of beta 3 I didn’t notice a change in battery life. However, this week I’m having to charge my series 10 multiple times a day. No amount of hard resets fixes the issue. Curious if others have seen this issue as well.

Is anyone else having issues with vo2max readings that don’t make any sense? Regardless of how frequently, intensely, or how long I exercise, my vo2max has been decreasing the past couple of weeks. Has anyone else seen this?

I added “bug” because I wasn’t sure how to label it. Starting today screenshots aren’t syncing to my iPhone. Both are on the latest beta. I can mirror so there’s a connection. Any ideas?

Update; I tried everything in this article to no avail, except wiping the watch, sigh :-/

Thanks in advance.

Hi everyone :)

It looks like Apple reacted to the problems with the bad battery health values and addressed them in the Developer 11.2 Beta 3.

##Release Notes | Developer 11.2 Beta 3

###Resolved Issues

Fixed: This update addresses potential inaccurate estimates of battery health reporting for some devices on watchOS 11.2 Beta 1 & 2. (139724084)

I used to get effort rating auto generated after a cardio workout (run, outdoor walk, indoor walk) but it stopped working a few days ago. Now I need to select it manually after each workout.

Anyone got the same issue and know how to fix?

Hi all, i bought ultra 2 natural titanium on 01 November and i updated it to beta cos my phine runs beta too after 6 charges bh is at 94% theres no way this is phisicly correct, brand new 2024 watch after 6 charges cnt drop. I see lot of you tell about this and it will not be fixed but is that real or not? Will they fix it with official 11.2?

I have an AWU and normally I could get a full day comfortably a full charge. But after I updated the latest beta the battery % is dropping at an alarming rate. For example, I charge my watch most evenings to full before I go to bed, so when I wake up in the morning the battery % is around the 92-95%, this morning I woke up and it was 65%.

I use sleep focus every night so my watches screen is turned off. But I have never seen the battery % drop so much.

Any ideas?

I have the Apple Watch Ultra running 11.2 Beta 2 as of yesterday, I thought I'd check my battery this morning & shows capacity @ 90%, the coincidental thing is that the other halfs Apple Watch Series 9 running 11.2 beta 2 is also showing battery capacity @ 90%, my conclusion is that Apple have either screwed our batteries through beta firmware which we accept can happen on betas & nothing can be done or there is a bug on the current beta versions making it show incorrect battery capacity, I have also read on Reddit that users have had similar problems & examples of this happening to them.

Is anyone else experiencing this? 11.2 DB 2

I’m on beta 11.2 (public)… but how can the capacity drop THIS much this quickly??? 82% —> 77% in 2 days? Someone please explain… this sounds way too much to be normal

I am getting the new beta displayed but after a reboot of both watch and phone it continues to give a failure to install. Am I missing something, Just updated my phone to the latest beta.

EDIT** To clarify, I have IOS18.2 Beta 3 installed as of the release this morning. I am now attempting to install WatchOS 11.2 Beta 2 on my UW2 watch.

EDIT 2**My watch is downloading. Apple may have resolved the issue with the install.

Ultra 2, got it on launch day. I had some extra cash so I wanted to replace battery with 87% health for $99. Chat support agreed. Went to  Store, Genius couldn’t run diagnostics. He stated repair depot will remove beta, and decline battery replacement.

Advice; don’t install further betas, come back if battery health is below or closer to 80%.

Not sure what to think ;-}

https://preview.redd.it/r233s3blkvzd1.png?width=396&format=png&auto=webp&s=22b466e149159713b71056f8be16d48a713c877a

I immediately reported this in the feedback app of course. I just saw the post of the other guy who just got the Ultra 2 a week ago and his battery dropped to 94% after downloading the 11.2 beta.

I have the apple watch series 9 since June this year and my maximum capacity went from 100% before the update to 91% a day after installing the update, which I don't think is normal but correct me if I'm wrong. I'm not a heavy user, just day to day normal stuff. A 40 minutes to 1 hour walk workout every day, that's about the heaviest thing I do with my watch since a month ago.

Anyone else having the same experience?

Just checked battery health on brand new AWU2 running 11.2 beta and battery health is showing 94%

Watch bought from Apple Store and showed 100% when I bought a week ago.

Thread with others having issue here too https://www.reddit.com/r/applewatchultra/s/NA1eKMzLZ7

It’s 3gb. Let’s hope they added the second hand aod for all faces in series 10…

Edit: they didn’t and probably never will. Buy the series 11 to get this “feature” probably. Lazy ass Apple.

Please report this to Apple if it pisses you off too

https://www.apple.com/feedback/watch/

I was on the 11.1 RC beta. My watch prompted me to update to 11.1 stable, which I thought was weird. Anyway, I updated, and now sleep apnea is turned off. Any fix for this? I submitted feedback in the app

I get on the hour chirps and notifications when I have my sleep mode activated on my watch.

I could have sworn it didn't used to do that before I joined the beta months ago.

Anyone else having this issue? I’ve been trying to install it for a few days on my S10 Titanium. Using 16 Pro Max on IOS 18.2!

Connected to Wi-Fi Connected to Charger Within Range of iPhone with Bluetooth on

I've been on Watch 11.1 beta for weeks. This morning I get a prompt to accept T&C's then am offered 11.0.1 as an update. If I switch off beta updates, it goes away. Makes the think it's a naming display issue? Strange

Pairing an old watch to a new iPhone and when going through pairing, watch app gets stuck on updating software. Beene Ike this for 30+ minutes with no moment. Help please.

Are these gradually released to developer profiles? Some tech news outlets point out that it’s out but on my units I still only see Beta 5.

Running 11.1 beta on my Apple Watch and not getting any notifications. Messages come in, but no notification whatsoever. No red dot, no ding, no vibrate. Anyone else?

Any idea why some vitals are not working? Sleep Modus is activated every night and I am using the watch already for several weeks but nothing…

i am noticing that my devices (not only iPhone) that are in the newbeta got a problem staying connected to the wifi and to actually use it; anyone got this problem too??

Hoping someone has an answer. I’m running the latest beta of watchOS on my AWU2 and I’ve noticed I no longer get text notifications at all. I’ve tried all the various notification settings and all are correct. I’m stumped with this one!

Anyone having this issue? If so, any advice?

TIA.