Found one of my old box mods that had a "Grizzly Vapes" sticker on it and I wanted to vape some of that NannerBear again. :(

I guess you're trying, oh well a dead end :P

So I'm helping a 65yo grandma get off smokes...

Trying juice after juice after juice to figure out what she likes is going to be a headache... and I'd like for her to be able to taste test stuff while I'm not there...

I know it's not on the site anymore, but do you guys happen to have any aerodrippers left over in the shop?

Doing it on my own with an RBA is one thing, but it sure would be nice to be able to just break open a pre-built head.

I just got a catalyst, and I'm curious if the behavior of the 510 is intended. When I screw anything down in the 510, it will reach a point where the atomizer reaches a bit of resistance right before screwing in completely. This results in a solid "click" sort of noise. I've never seen this in any other mod, so I'm not sure if the click is a normal aspect of the Fat Daddy connection, so any insight would be appreciated.

Ive been on a brutal, long hunt for the perfect box mod. Scouring fasttech and reddit and the depths of ebay for far too long. Then I remembered steammonkey had one out and damn those things are freakin cool. To me a perfect box mod would have a way to lock the switch, which is something im willing to overlook for this mod because switch placement looks pretty darn pocket friendly. The usa made aspect and the fact that this is a pretty unique device makes memore willing to spend the money.

There is one concern that haunts me; the intro video shows how the positive flow cycles upwards to that top plate, would that make this susceptible to the autofiring that we've seen in the cherry bomber if something like a key were to complete the circuit to the atty body?

Thanks, and great work to the ursimian team! You guys have been a pillar in the vaping community and im glad to see yer still going strong!

There is something

I've been vaping the Grizzly Vapes juices exclusively since I put down tobacco last September. I started on the 12mg Koko Bear as a chance find at a local vape shop, then moved on to Polar Bear after that. I've tried almost all of the Grizzly Vapes flavors, but 3mg Polar Bear is my every-day flavor for the past couple months.

There have been some things recently brought to my attention regarding the chemicals Diacetyl, Acetyl Propionyl and Acetoin; their use in artificial flavorings that has me concerned. I saw on the /r/electronic_cigarette wiki's supplier list page that Steam Monkey's juices don't contain Diacetyl, and I'd like to get confirmation of that. What about Acetyl Propionyl and Acetoin? Have the juices been tested by an independent laboratory? If so, can the results of those tests be shared verbatim? If not, are there plans for such testing to happen?

Wondering if any of you guys could help me with this hot button issue I'm having. My mod seemed to work perfectly fine for almost a week and then I started getting ridiculously hot buttons and low vapor production.

I've gone through the trouble shooting guide and cleaned the threads, sanded the button down and applied Noalox. Yet I still have the button getting stuck in the firing position, arc ing issues from time to time, and a ridiculously hot button after one drag. What do I do to fix this?

Are the Cloud series juices max vg?

Thanks for stocking this one! Had it on my wish list since I first saw it. Just arrived yesterday and I'm vaping some fresh nanner on it as I type. It is such a beautiful device and an amazing first high wattage regulated vape for me. Been using mechs for over a year until now.

Glad I could buy it through my fave online vendor!

Edit: Omerta RDA arrived today so waited to take a pic until I had it set up:

For anyone on the fence about this mod who doesn't need 150 watts, I can't find a single thing I don't like about it. Compact, single battery, great performance, well built and has a nice heft to it.

http://i.imgur.com/vCN2cN2.jpg

Pretty much the title, had a few 'fires' in my pocket so getting curious about the magnetic pog's/ 'lock ring'

Thanks all!

I'll be posting images of the new SteamMonkey Signature FUFDA's as I finish making them. Once I get 10 or so, I'll list them all on the website, for now... I'm just being a cock tease.

The signature series FUFDAs will all be 1 of a kind. modified by hand, in house. The first of the series is Snowflake.

I spent quite a long time re-creating the pattern from the Atlantis metal replacement tank and then cutting out a mask so that we could etch the tube to create that look.

http://imgur.com/hi94qbu

So my FUFDA worked awesome right out of the box, until about yesterday. My button started to get warm, so I went through the steps in the troubleshooting link and that didn't really fix it. It seems to vary between the edge and the center getting hot. I went lightly over the button surfaces with 1500 grit sandpaper and wiped the threads on all surfaces but the button is still getting quite hot (along with the entire bottom now) and I'm seeing limited vapor production. Is there anything else I can try? I love this mod and just want it to work again!

I've cleaned everything much as I can, used an emory board on the button contact since it gets hot sometimes, made sure there was a gap on the copper pin, but this thing will not fire on my holmes rda. I don't have another rda at the moment, but I can put it on my istick and it will handle it fine. I'm guessing something is not making good contact somewhere, and some of my threading is a little messy (I don't think it should cause this much trouble though) but I can't figure it out.

Any help?

Thought I'd start a thread for FUFDA first fire pictures. Here is mine, just got it today, cleaned it and built a dual coil 0.42Ω parallel 28 AWG on a Castle RDA. sry4potatopic

Imgur

Looks like they are shipping out guys and gals. Looking forward to trying the new switch design. It will probably be a backup, but I'm still excited.. plus Nanner!

I'm looking into getting my first mod. I'm slightly overwhelmed by the different mods and types. I've owned an eGo-Twist for awhile and loved the adjustable voltage controls so I definitely want a VV mod. I'm looking for a kit/combo that will produce a lot of vape and want a mod that is both durable and stylish. Any information and resources would be really appreciated.

I missed the first pre-order cuz funds+stupidity. Any idea when the next run will be?

Time to stock up again, wondering if Bulk ordering is still available. You guys really should look into doing >30ml bottles at some point, I know I'd order by the liter if it was an option.

Hi I'm looking to buy the Odin RDA, the Loki router bit and some juice but have noticed the Loki router bit is out of stock.

Will you guys have it back in stock soon? Or is it not worth the wait and I should just pull the trigger now.

Really excited about this RDA as it has all the features I want and appears to perform like a champ.

We just released 2 new Ursimian drip tip styles. The Stump and the DL-44.

Check em out at http://steammonkey.com under USA Hardware. Or if you facebook, you can see pics here.

https://www.facebook.com/media/set/?set=a.927250060635995.1073741825.522138934480445&type=3&uploaded=3