/r/ptr91

Photograph via snooOG

/r/ptr91

2,662 Subscribers

8

Looking for several clip on ejection port buffers "hylsbuffert" that was used on the AK4. Preferably something within Europe. Dwsuk, zib militaria unfortunately don't have them in stock and I haven't found any other sellers.

3 Comments
2024/06/19
23:26 UTC

3

123 gr SST

I have a ptr that won’t group anything. I’ve tried everything from 147-200 gr and three different powders. My best combo I have found so far is varget with a 200 gr ELD-x at 3.5-4 moa. This rifle shouldn’t have piss poor accuracy with handloads. I went to one extreme with 200 gr so I’m going to try the other direction and give 123 gr a shot. Has anyone shot this weight and had any success? I have a feeling I’m just going to waste another $40 so I’m hoping someone has had good results. I’m on the line of completely giving up on this thing and selling it to cut my losses.

7 Comments
2024/06/18
18:49 UTC

3

Spuhr handguard

I'm looking to do an AK4c/d build and am trying to figure out if the Spuhr handguard takes proprietary rails or if something else will fit. Anyone knowledgeable in such things?

3 Comments
2024/06/18
12:24 UTC

2

PTR pistol brace?

Have a PTR 32 PDWR in 7.62x39 with 8.5 barrel. Obviously not a 91 just can’t find any groups to ask but any brace recommendations? I know SB is the go too but can’t find any that are PTR 32 PDWR specific. Any input?

19 Comments
2024/06/17
22:58 UTC

1

Magpul PRS Stock for sale?

Looking for a magpul PRS stock for sale? Is anyone selling or willing to sell?

2 Comments
2024/06/17
22:27 UTC

6

Where to find a bipod?

I need help. I've been searching for a classic bipod for the wide handguard. Some people are selling them for like $400-$500. I read about the airsoft bipod trick. However, every single airsoft bipod was sold out as well! Where are you guys finding bipods for under $200?

7 Comments
2024/06/15
21:17 UTC

4

Is this weld needed ? I see on some cetme/Ptrs they have it, and others don’t, what’s the deal.

5 Comments
2024/06/10
17:26 UTC

14

Roller Dents on GI100?

Had this GI100 since fall 2021. Never had any issues with it firing steel (Red Army, Tula, Wolf) and factory brass loads, all 150-168gr projectiles. Rifle has seen close to 600 rounds. Bolt gap measures .011.

On my last outing as I shooting the PTR I noticed small roller dents toward the front of the chamber. However, I don't recall having any issues that day as it shot fine. I was shooting steel case ammo that day.

I field stripped it and cleaned the bolt and carrier. Nothing out of the ordinary from what I can tell.

Any reasons why these roller bumps developed?

7 Comments
2024/06/09
04:24 UTC

7

Any ideas where to get a ptr91 wide handguard bipod that’s affordable?

9 Comments
2024/06/07
15:56 UTC

5

Left hand user?

Within some time I do intend to buy a PTR91 and join the cool kids club. But I do have some concerns as a lefty. Yeah I know I shoot wrong handed despite actually being a right handed person

1: Charging handle: a lefty ‘reach around’ to operate it? I know you can get it switched to the other side but it’s expensive AFAIK.

2: Metal lower grip: does that bulge on the left side of the grip make holding it lefty uncomfortable?

3: Ambidextrous safeties: do they only exist for plastic lowers? (I think there’s a magpul lower) Or can metal lowers have them installed?

4: Sling setups: I do want to get an MLOK handguard but it seems like the surplus stocks only have it on the left side.

Overall I don’t really care enough about most of the possible drawbacks since I want one too much, but I want to optimize my experience based on the amount of choices I have.

5 Comments
2024/06/06
18:27 UTC

5

PTR A3S or A3SK

Does anyone know if the 18” barrel or 16” barrel makes a big difference performance wise, regarding velocity and range? I have a PA ACSS 5x36 prism optic that I’ll be mounting to one of these rifles when I purchase it, and wanted to know if I should pick one over the other? What effective range can I expect from the 16”? Also, I would like to add some modernized features to my PTR 91 to resemble that of the German special forces like the KSK and and SEK, but I don’t know if they use the 16” or 18” HK G3, as I can’t seem to find a lot of info online. Thanks for the help.

11 Comments
2024/06/06
03:38 UTC

3

PTR GIR or A3S

I’m having a tough time deciding what model of PTR 91 to go with. I am not sure of the differences between these two models but I have decided to go with one of them because they are 18” barrels and both have the welded optics rail mount. I am planning to modernize whichever I go with by putting on a PTR picatinny handguard with a vertical grip, a PA ACSS 5x36 prism scope, and a G3 retractable buttstock. I would prefer the historically accurate and correct look of the G3, even though I’m modernizing it I would be swapping back and forth knowing myself. Do both models have the same barrel and features, with the only difference being the furniture, and lower? Or is there something else that differentiates them. I’m also left handed and I know the classic original look has the pistol grip with the groove on the left side, does this make it uncomfortable to grip for a left handed shooter? Also any advantage of the steel lower housing on the GIR vs the polymer A3S lower housing? Is the finish different on the models and which would be considered more premium and superior. Thanks.

8 Comments
2024/06/05
23:14 UTC

18

HK91/G3 Wide handguards in stock

RKSUSA.net just sent me an in-stock notification if anyone’s looking

18 Comments
2024/06/03
18:20 UTC

1

12.5” in stock?

Lots of places have the 8.5” in stock but does anyone know of any place with a 12.5” in stock?

6 Comments
2024/06/03
02:45 UTC

32

My work in progress, next up is some black wide handguards

10 Comments
2024/05/27
16:18 UTC

4

PTR91/HK91 Parts For Sale

0 Comments
2024/05/24
21:44 UTC

1

Rail Mount?

Does the PTR91 ( or the PTR 100 GI model) accept the B&T rail mount for optics? New to the G3 platform

1 Comment
2024/05/24
19:19 UTC

2

Extractor damage & spring replacement after 200 rounds of LC M80

So I finally completed the 200 round break in PTR recommends on my A3S. Every round of LC M80 fed perfectly and there were no issues of any kind.

After pulling everything apart I found the extractor could move under finger pressure. That’s no good. I pulled the extractor because of the deformation and also replaced the spring. I has lucky and had two factory HK extractors and a bunch of springs on hand. One of the two extractors fit the PTR bolt.

Feeds and functions fine still. Ran some Tula .308 steel case with no problem.

https://ibb.co/BjMVcK8

7 Comments
2024/05/24
18:52 UTC

0

[WTB]

Does anyone have a HK21e buffer assembly that they want to sell?

0 Comments
2024/05/22
21:35 UTC

25

TA31F on the 91 because armslist traded me a cheap 5.56 bdc.

2 Comments
2024/05/21
19:54 UTC

38

I see your ta11 and raise you a ta33 and german shepherd puppy

The cheek riser is a cut up pool noodle and medical self adhesive bandage, it works way better than it looks

15 Comments
2024/05/21
18:47 UTC

0

Bipod collapsing?

Hey yall, having an issue with my ptr bipod, it "locks" but I never have to actually unlock it, I can swing it in and out by hand which leads to it collapsing forward or back while shooting. How do I fix this?

3 Comments
2024/05/21
00:10 UTC

3

High profile scope risers help for PTR 101

So I am wanting to throw a scope on top of the PTR 101. Odd question. Is it possible to use high profile scope rings that allow backup use of iron sights? Is it scope or iron sights or can you have both? PTR 101 has picatinny rail already. So no claw adapters needed. Pardon my ignorance. New to the whole PTR/HK world. Very cool though!

4 Comments
2024/05/20
23:25 UTC

2

Best optic for general purpose

New to the ptr familia, torn of keeping it classy or dressing up.. milk hand guard stock etc… wondering what optic to run what she’ll eat up.. work at a shop so looking at either sig msr 1-6 or EOTech 512 with magnifier

12 Comments
2024/05/16
14:44 UTC

0

Can I convert my gun, legally, to have full auto?

So, when doing some work for SDI I noticed the trigger group of mine is actually a demilled G3 trigger. Could I, after going through the legal steps needed, be able to make it back to a full auto version? I'm mostly just curious and don't want to be told how to do it, just to see if that's an option for later on

15 Comments
2024/05/16
04:52 UTC

2

32PDWR with 12.5 inch barrel. Any feedback?

Hello!

Been a fan of PTR for a long time, finally have it down to the 7.62x39, and I'm leaning to SBR'ing the 12.5 inch barrel version. I'm 6'2, and once had a Tippman M4 style Micro with a 7inch barrel, and perhaps it was the overall length, but I found it way too small to shoulder.

Never held a PDWR so its an unknown. I've held the 9CT, and felt that it was also a bit small, but never held an SBR version of the 9CT, much less that SBR version of the PTR32. Given that the body is larger, so the overall length should be longer (length of comb is the factor)

Its time to buy, so I'm looking for any feedback from any owners. I'm definitely going to SBR it, even though I don't want my name on any list, but that can't be helped. I'm also super focused on the wood, front and rear, but already know that finding a wooden fore for the 12.5 inch would be super hard, and might have to be custom made, so that's a bummer.

(I'm moving, and selling my house, so I'll have the money to finally buy one. Sadly, the state to which I'm moving won't allow me to have a Frankling binary trigger system!!! Already checked, so that was quashed! )

Love any feedback!

4 Comments
2024/05/15
13:32 UTC

Back To Top