I dropped a xiaomi phone and at the top of the screen for a few seconds there was a bugged screen after which the phone turned off and is unresponsive. Nothing cracked and nothing bended but it still doesnt work. Will aprieciate if anyone knows how to fix it or if i should give it to a repair shop.

Hello! Asking another question since I had this watch for years however it sat in a drawer flat. My Amazfit Pace finally died and I’ve been meaning to get this watch used again but the battery can’t hold a charge to the point it just stays on the green snake screen. I got quoted $50 for the repair when the battery costs $10. Watching the repairs on these aren’t that bad, but a lot more careful than others I’ve done. Would it be wise to spend the extra $40 to have it done or risk the repair myself as I’ve done a number of iPhone and iPad repairs which may help with experience?

Help would be greatly appreciated

While I was using my phone earlier, a blue screen popped up, that says “A custom OS can cause critical problems in and installed applications” ”If you want to download a custom OS, press the volume up key. Otherwise, press the volume down key to cancel.”

I don’t have a custom OS installed. The first time it happened I pressed the down key and my phone did restart but all it did was go back to the blue screen. Now when I do it nothing happens, nothing happens when I press the up button either.. My volume down key is kinda jammed (it goes up and down by itself). What do I do? The device is a Samsung Galaxy A50.

I couldn't f!nd the best flair for this, sorry

This is an iPhone 8 Plus logic board. For whatever reason, it does not give a display out or sometimes it shows up glitching out on this phone. But I can confirm the screen itself works just fine on another iPhone 8 Plus. Are these connectors already bad or what could be the case?

Changed the battery by transferring the bms and then using a tag on flex but battery health is stuck on 0%? Anyone know how to fix?

I have a MI 11 lite, its not turning on at all, it began yesterday when the phone screen froze and showed one line like LCD failure lines, then it turns off, when I kept pressing on the power button it naturally turned on, but then this situation kept happening more than 10 times,with each time the line appears horizontally in a different place than before, then this morning it finally stopped responding and refuses to turn on(The battery had 80% when it crashed so empty battery isn't the reason), reasons for this happening I can think of is storage becoming full(128GB/128GB) and using my laptop charger on the phone because it charges faster (USB type-C), If there's other reason for why this is happening please tell me and give solutions.

This is the screen protector that she removed afterwards, stating the crack only appeared after she started removing the screen protector. She said she was just scrolling socials and then suddenly the screen starred flashing white around the same place as the crack. I had repaired with a genuine screen 3 weeks prior and she stated she had no issues until a night last week. Any thoughts on what might have happened, she said it has not been dropped at all... Please help, she wants a full refund for my apparent shoddy work

was wondering if the custom shells build for the USA model work on global phones especially for the 13 mini......

hi so i have an iphone se 3 and its damaged, i want to do a housing swap but im not a big fan of the midnight color. Can I use the black iphone se 2020 housing instead?

https://preview.redd.it/zy9rqrckojge1.png?width=525&format=png&auto=webp&s=fce3278b4587586983afc32ada8778f56f57c64e

Got this phone today from eBay. Seller stated absolutely nothing wrong with it in the description. (Bought just as a spare phone)

Trying to setup Face ID, which I’m facing issues with.

I make sure my face is in the frame and all it keeps doing is asking me to move the phone a little lower or higher, sometimes going out of focus and then a pop up indicating Face ID is unavailable.

I instantly noticed the display has been replaced at some point, since it’s not oled. I’ve opened it up and see nothing which could be causing a problem. Even done a component verification check. All good other than the display being marked as replaced.

Any constructive recommendations?

Any info would be appreciated.

I want to replace the battery i ordered these preprogrammed no soldering require battery tagons that apparently i can just tagon to the aftermarket battery to show 100% in settings. is this true?

iPad Air 4 (aka iPad Air 2020) slightly bent, it was just fine some time ago but i think ive prolly bent it yesterday, bought it 6 months ago, should i give up and sell it or try unbending it?

What is the best way to protect the camera lenses while having the backglass off, without the cameras getting dirty?? Please help.

My phone is a Infinix Note 30 (X6833B)

Had my phone screen recently replaced and at first I noticed that sometimes it doesn't tap but then later when I opened a game then close it the screen isn't working anymore what I mean is I'm tapping but it doesn't click on my screen then sometimes it click on something I didn't tap on.

It happens when I go on landscape then go back to portrait mode. It happens on like a video on YouTube or a game that put my phone on landscape mode.

Could this be a software issue or something to do with the replacement screen?

My phones back glass was opening and I removed it, could that be a reason?

Might come to the repair shop but not this weekend so I'm looking for answers.

I have an iPhone 14 Plus that keeps crashing and booting back up again, I have repaired this phone in the past, but the problem only occured yesterday when i was replacing the screen. First i replaced the broken screen, with a semi-broken original screen to see if it was working in general. After replacing it kept bootlooping, not recognized by my mac in DFU mode (checked with different cables). For some reason it turned on out of nowhere, and kept charging. Now it is fully charged and restarting every 5-10 minutes, so making a backup or updating the device is impossible, I am basically stuck in a reboot loop, and each time I have a small timeframe to look around on the Phone and it restarts again.

I was able to take the latest crash report, but i don't really understand what to look for and what conclusions to make. Can someone maybe look at the crash report and tell me what is wrong and/or what could be wrong?

I have almost fully rebuilt this iPhone 14P, The things I replaced like a year ago were not original:

• Battery
• Screen
• Frame
• Backglass

Now I have put the original screen from this iPhone on the device.

This is the CRASH REPORT:

-------------------------------------

Translated Report (Full Report Below)

-------------------------------------

Incident Identifier: 3D755D75-E3A8-4483-9432-5CC5754330F0

CrashReporter Key: 553e897c18c26abed45ecab2f2a4a8c6da932b67

Hardware Model: iPhone14,8

Process: apsd [140]

Path: /System/Library/PrivateFrameworks/ApplePushService.framework/apsd

Identifier: apsd

Version: ???

Code Type: ARM-64 (Native)

Role: Unspecified

Parent Process: ??? [1]

Coalition: com.apple.apsd [217]

Date/Time: 2025-01-30 19:54:48.3745 +0100

Launch Time:

OS Version: iPhone OS 17.5.1 (21F90)

Release Type: User

Baseband Version: 2.60.02

Report Version: 104

Exception Type: EXC_GUARD

Exception Subtype: GUARD_TYPE_USER

Exception Message: namespc 7 reason_code 0x0000000000000009

Exception Codes: 0x6000000000000007, 0x0000000000000009

Termination Reason: LIBXPC 9 XPC_EXIT_REASON_FAULT

Triggered by Thread: 0

Thread 0 Crashed:

0 ??? 0x1d131d680 0x180000000 + 1362220672

1 ??? 0x1e5103fd8 0x180000000 + 1695563736

2 ??? 0x1e51193a0 0x180000000 + 1695650720

3 ??? 0x1e5119aa0 0x180000000 + 1695652512

4 ??? 0x1000cbb00 0x1000a8000 + 146176

5 ??? 0x10010abc8 0x1000a8000 + 404424

6 ??? 0x1000b6118 0x1000a8000 + 57624

7 ??? 0x1000b45c8 0x1000a8000 + 50632

8 ??? 0x1000b2590 0x1000a8000 + 42384

9 ??? 0x1000b22e0 0x1000a8000 + 41696

10 ??? 0x1000b2258 0x1000a8000 + 41560

11 ??? 0x19011ce5c 0x180000000 + 269602396

12 ??? 0x19010ddd4 0x180000000 + 269540820

13 ??? 0x19011c5a4 0x180000000 + 269600164

14 ??? 0x19011c1b8 0x180000000 + 269599160

15 ??? 0x18823b710 0x180000000 + 136558352

16 ??? 0x188238914 0x180000000 + 136546580

17 ??? 0x188237cd8 0x180000000 + 136543448

18 ??? 0x187158e4c 0x180000000 + 118853196

19 ??? 0x187158d20 0x180000000 + 118852896

20 ??? 0x1000ff250 0x1000a8000 + 356944

21 ??? 0x1ab8e9e4c 0x180000000 + 730766924

Thread 0 crashed with ARM Thread State (64-bit):

x0: 0x0000000000000000 x1: 0x000000001f604000 x2: 0xa5335a1fae62f504 x3: 0xd5536725fa7c459b

x4: 0x000000019f604000 x5: 0x388d4c8fa1ba000c x6: 0x0000000000000000 x7: 0x00000005bc968780

x8: 0x00000005bc968780 x9: 0x00000005bc01b040 x10: 0x0000000000000000 x11: 0x000000020855dfb0

x12: 0x0000000000000001 x13: 0x00000005bc0dc480 x14: 0x00000005bc0ec000 x15: 0x0000000100e44000

x16: 0x0000000000005000 x17: 0x000000016f552aa0 x18: 0xfb7d378100c82f40 x19: 0x00000005bc0dc480

x20: 0x00000005bc0ec000 x21: 0x0000000000000000 x22: 0x0000000000000000 x23: 0x000000016f552b70

x24: 0x1e78e48100c99ac8 x25: 0x0000000000000000 x26: 0x0000000100000000 x27: 0x0000000000000000

x28: 0x00000005bc01b040 fp: 0x0000000000005000 lr: 0x0000000100e44000

sp: 0x00000000bc245780 pc: 0x0000000000000034 cpsr: 0x00000000

far: 0x0000000000000000 esr: 0x00000000 Address size fault

Binary Images:

0x180000000 - 0x236f98ffb ??? unknown-arch <04f562ae1f5a33a59b457cfa256753d5> ???

0x1000a8000 - 0x1400a7fff ??? unknown-arch <a3128cfa2d4331128e85266f320c7587> ???

Error Formulating Crash Report:

PC register does not match crashing frame (0x34 vs 0x1D131D680)

EOF

-----------

Full Report

-----------

{"is_simulated":1,"app_name":"apsd","timestamp":"2025-01-30 19:54:53.00 +0100","app_version":"","slice_uuid":"a3128cfa-2d43-3112-8e85-266f320c7587","build_version":"","platform":2,"share_with_app_devs":0,"is_first_party":1,"bug_type":"308","os_version":"iPhone OS 17.5.1 (21F90)","roots_installed":0,"incident_id":"3D755D75-E3A8-4483-9432-5CC5754330F0","name":"apsd"}

{

"uptime" : 47,

"procRole" : "Unspecified",

"version" : 2,

"userID" : 501,

"deployVersion" : 210,

"modelCode" : "iPhone14,8",

"coalitionID" : 217,

"osVersion" : {

"isEmbedded" : true,

"train" : "iPhone OS 17.5.1",

"releaseType" : "User",

"build" : "21F90"

},

"captureTime" : "2025-01-30 19:54:48.3745 +0100",

"codeSigningMonitor" : 2,

"incident" : "3D755D75-E3A8-4483-9432-5CC5754330F0",

"pid" : 140,

"cpuType" : "ARM-64",

"roots_installed" : 0,

"bug_type" : "308",

"procStartAbsTime" : 544657715,

"procName" : "apsd",

"procPath" : "\/System\/Library\/PrivateFrameworks\/ApplePushService.framework\/apsd",

"parentPid" : 1,

"coalitionName" : "com.apple.apsd",

"crashReporterKey" : "553e897c18c26abed45ecab2f2a4a8c6da932b67",

"wasUnlockedSinceBoot" : 1,

"isLocked" : 0,

"codeSigningValidationCategory" : 0,

"codeSigningTrustLevel" : 0,

"basebandVersion" : "2.60.02",

"isLightWeightCorpse" : 1,

"exception" : {"codes":"0x6000000000000007, 0x0000000000000009","reason":9,"message":"namespc 7 reason_code 0x0000000000000009","subtype":"GUARD_TYPE_USER","type":"EXC_GUARD","rawCodes":[6917529027641081863,9],"namespc":7},

"termination" : {"flags":518,"code":9,"namespace":"LIBXPC","indicator":"XPC_EXIT_REASON_FAULT"},

"faultingThread" : 0,

"threads" : [{"triggered":true,"id":2210,"threadState":{"x":[{"value":0},{"value":526401536},{"value":11903957332186559748},{"value":15371743365959533979},{"value":6968852480},{"value":4074997417617522700},{"value":0},{"value":24638818176},{"value":24638818176},{"value":24629063744},{"value":0},{"value":8729780144},{"value":1},{"value":24629855360},{"value":24629919744},{"value":4309925888},{"value":20480},{"value":6162819744},{"value":18121701502812172096},{"value":24629855360},{"value":24629919744},{"value":0},{"value":0},{"value":6162819952},{"value":2195756061058243272},{"value":0},{"value":4294967296},{"value":0},{"value":24629063744}],"flavor":"ARM_THREAD_STATE64","lr":{"value":4309925888},"cpsr":{"value":0},"fp":{"value":20480},"sp":{"value":3156498304},"esr":{"value":0,"description":" Address size fault"},"pc":{"value":52,"matchesCrashFrame":0},"far":{"value":0}},"frames":[{"imageOffset":1362220672,"imageIndex":0},{"imageOffset":1695563736,"imageIndex":0},{"imageOffset":1695650720,"imageIndex":0},{"imageOffset":1695652512,"imageIndex":0},{"imageOffset":146176,"imageIndex":1},{"imageOffset":404424,"imageIndex":1},{"imageOffset":57624,"imageIndex":1},{"imageOffset":50632,"imageIndex":1},{"imageOffset":42384,"imageIndex":1},{"imageOffset":41696,"imageIndex":1},{"imageOffset":41560,"imageIndex":1},{"imageOffset":269602396,"imageIndex":0},{"imageOffset":269540820,"imageIndex":0},{"imageOffset":269600164,"imageIndex":0},{"imageOffset":269599160,"imageIndex":0},{"imageOffset":136558352,"imageIndex":0},{"imageOffset":136546580,"imageIndex":0},{"imageOffset":136543448,"imageIndex":0},{"imageOffset":118853196,"imageIndex":0},{"imageOffset":118852896,"imageIndex":0},{"imageOffset":356944,"imageIndex":1},{"imageOffset":730766924,"imageIndex":0}]}],

"usedImages" : [

{

"size" : 3069808636,

"source" : "S",

"base" : 6442450944,

"uuid" : "04f562ae-1f5a-33a5-9b45-7cfa256753d5"

},

{

"size" : 1073741824,

"source" : "P",

"base" : 4295655424,

"uuid" : "a3128cfa-2d43-3112-8e85-266f320c7587"

}

],

"legacyInfo" : {

"threadTriggered" : {

}

},

"trialInfo" : {

"rollouts" : [

{

"rolloutId" : "6297d96be2c9387df974efa4",

"factorPackIds" : {

"SIRI_VALUE_INFERENCE_APP_RESOLUTION" : "6670720dd96ac33f5269b6b4"

},

"deploymentId" : 240000029

},

{

"rolloutId" : "648c94d4ebdf9e3e398fa708",

"factorPackIds" : {

"SIRI_UNDERSTANDING_NL_OVERRIDES" : "65a8104b6712a43e7922cab8"

},

"deploymentId" : 240000171

}

],

"experiments" : [

]

},

"reportNotes" : [

"PC register does not match crashing frame (0x34 vs 0x1D131D680)"

]

}

Hope you can help me :) <3

i put my phone in recovery mode and it wont exit out even when i did the volume down then volume up then holding the powerr button, it shows the apple logo then sends me back to recovery mode pls help!!!

Hello everyone,

My Redmi Note 10s was in the shelf for about 1 year, now I want to use it again because my new smartphone is broken. Unfortunately, it no longer starts at all. Screen stays completely black. I have tested the following:

- Connection to original charging cable for several hours/days

- Pressed the power button for 30 seconds

- Power button with speaker button pressed

Nothing happens, any ideas?

The mobile phone worked without any problems a year ago.

I was repairing the screen of a iPhone 11 and I was trying to disconnect the battery with the tweezers and a small spark came out. Thinking it was normal. Until I turned it on and it’s showing 0% percent of battery but works for 3 minutes and tries to restart. Please help to figure out the problem.

OP7pro won't boot and has all the symptoms of a bad motherboard that probably needs to be reflowed or replaced. I need the data recovered, anyone have shop recommendations preferably in southern California

Hello everyone. I want to know, since the new functionality of apple allowing replacement of oem replacemenparts Is it possible to repair it with a used speaker/proximity flex cable and pair it with the phone?

Anyone had B7000 react with lcd screens or other components? I’ve just done a lcd on a Galaxy A14. I tested the lcd before securing it in the frame and it was ok, then I glued it into the frame with B7000 and after 30 minutes the screen went dead. I guess I should have used tape

I haven't done one recently on this model. Does anyone know if there is a message when replacing the port with an OEM pull?

Hello guys, i bought a broken s10, repaired it, tried to glue it, then i realised i glued it wrong, came back to unglue, and saw this monstrocity, glue everywhere, over the components and basiccaly just tons of it, my qestion is, what should i use to clean it of? 99% isopropyl alchohol with a cloth, or what? And another question, after the glue, when pressing my volume down button, it became hard, like verry hard to press, it still does work, but its hard to press, what should i do? Would dismantaling the phone and cleaning the frame help, or is there a easier solution? Thanks!