Does anyone have a cad model of the side fairings? I’m gonna make some carbon fiber panels, but my 3d scanned part turned out like garbage.

I can silicone cast them, or create a mold on the bike, but I won’t have mounting locations.

Hey everyone! Looking for some from experts here. I have a 2024 grom that is not getting power to the spark coil. Engine turns over strong and the fuel pump primes. I already ruled out the kickstand switch, clutch switch, and I believe the tip over switch is fine. The blue/pink wire going to the coil has continuity from the ecu as well. Regardless when I turn the ignition on, I have a solid check engine light and the bike will turn over but no spark. Before I rip the wiring harness out and start looking for shorts, does anyone have an idea how I can read what code is causing that check engine light to come on? I have already cleared the dtcs and reset the ecu with the successful blink but the check engine light comes back immediately after cycling the ignition. Thoughts?

My bike is on 1 bar of fuel and when I look it the tank it looks like there's a decent amount however the tank is shaped weirdly inside. I've done 140miles so far

Does anyone else get shit on by coworkers or friends, or people in general, about riding a grom? I’m a bigger dude, 6’1, 200 lbs. I just got the bike for fun and to save on gas, and I’m having a blast. But what is with everyone’s attitude? Is it just my area?

I search of a shifter lever that will work with the lower fairing. Anyone recommend or could do measurements of the ones they run?

Only have a few left before ordering another batch!

Grom Logo 1.)

https://www.ebay.com/itm/326317775433?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bpsyo33ZQz-&sssrc=4429486&ssuid=bpsyo33ZQz-&var=&widget_ver=artemis&media=COPY

Grom Logo 2.)

https://www.ebay.com/itm/326320077164?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bpsyo33ZQz-&sssrc=4429486&ssuid=bpsyo33ZQz-&var=&widget_ver=artemis&media=COPY

I recently bought my first Grom and am wanting to do some upgrades to it exhaust air intake and tune. I have only managed to put 173 miles on it so far. Should I wait until I get past the break in period or am I good to mod away?

I'm getting a 2025 abs grom Saturday I want to put rear side fairings on the back. Suggestions on where to get them?

I bought a 2025 not too long ago. Just hit 600 miles. Is it worth it to pay for the dealer to do the service or is it something I can do cheaper on my own? I’m a mechanic but it’s my first motorcycle and I’m trying to take care of it the best I can. By no means a motorcycle genius.

Does anyone have experience with non-oem replacements like Racing Bros or Tusk?

To save a long story, just having some gremlins in one of the fuel delivery parts. No biggie just annoying.

Finally got it running right and reset the TPS and ECU but u like the many other times, it never gave me the approval blink, instead it’s just permanently on and won’t respond to code checking.

Bike is running better than ever. This is my kinna luck lmao.

Believe I have a bad IAT but could never verify. Guess for now we ride on? 🤷🏻‍♂️

At least she’s movin again.

I’m about 5’3 and maybe my arms are short but I feel a lot of pressure on my wrists/arms after riding. I feel like I’m leaning forward more than I’d like. Would raising the handlebars fix this problem? Thanks.

Hey everyone, I hate the Grom headlight and I like the Chimera Baja Designs light pod mount but I did not like the price. I decided to design and 3D print my own. Once I work out the kinks and make sure it does not fall off and the light is at the correct angle I will post the STL file so anyone can 3D print it. This was printed with black PETG on a textured plate but after doing so it does not look quite as black as I would like but it’s not horrible. I may try some other printing methods. Also not sure if I want to leave the sides blank like it is or add some more notches or whatever, lmk if you have any ideas. Once it’s printed all you would need is a Baja Designs Squadron light pod Pro or Sport, high/ low wiring harness from Steady Garage and four 12x3mm screws to mount everything.

Hi! I'm new to stunting and, well, riding in general. Here's a pic of me and my OG! ♡

Like the title suggests, how easy is it to bent the sub cage when stunting a sf grom with a 12bar?

They stole my cluster, just ripped it right off. Any recommendations for a new one would be helpful