I’m sick of feeling guilty about throwing away plastic & batteries, but I’m addicted to the sweet flavors in tiny packages!

Any suggestions?

They’re selling these at a gas station I go to and I’m tempted to buy one but I really don’t like sweet vapes. Every one I’ve tried that’s a menthol or mint ice of some kind is still sweet. I’m a former Juul vaper but it got too expensive so I’m trying to find something similar.

Three months after owning the level x body, and its fried 😭

E-Cigarettes Assorted flavors 6 loads x 720,000 in each 4,3200,00 E-Cig "NJOY DISPOSABLE E-CIGARETTE LOADS ALL 100% BRAND NEW CASED ITEMS" ALL 100% BRAND NEW CASED ITEMS TRADITIONAL BOLD, GOLD & MENTHOL E-CIGS "30 E Cigs in a carton

300 E Cigs in a case

Total of 30,000 E Cigs per pallets

Per load 720k E Cigs per load

4,320,000 E Cigs in total 6 loads"

The best offer may take them all.

1 809 440 5368

Carlos

I've been ordering disposable vapes online and have been receiving in mail through USPS without having to show anything to carrier. I really hope that continues and doesn't change. I was wondering how come some vape sites require the adult signature and ID to carrier and others don't, like are they being sneaky or is the ID upload to site enough proof for some ? Just been hearing mixed things about what the laws are.

Not looking to buy, just wondering. Wapari, zero, harrakan, tqxeusz, deevers, nicobox, frost, and countless others were selling regulated stab faster than they could make them. Not to mention all the high end mech stuff - provari, carvela, nemesis, lion, tarseuz, da copper, swan, gp paps atmizoo, etc. Were the same thing, selling stuff hand over fist. What/where are all the devices now, just shelf queens collecting dust?

Wrote this on 3fvape site but I don't know if it will be made public and want people looking to buy this mod to see this.

TLDR: Really poor construction and quality control, mod was completely broken within a week and was shorting and causing arcing and sparks. Got a refund from 3fVape and and writing this as a warning to anyone looking to buy it.
When I first got the device, I took it from the package and went to inspect it and a screw instantly fell out from the top. I also instantly noticed something rattling around the mod. When I went to open the device, I noticed the screws were partially stripped straight out of the box, with one screw that was completely round with a cut in it. After struggling to get the screws out, I saw what was making the rattle. It was the threaded rod that was supposed to be securing the screw that fell out. I thought oh well and put in a tank and got it set up.
It seemed to be working okay, besides the top panel that was protruding because of the missing screw that I couldn't fix because the plastic was broken. The mod was working decently for the first few minutes, but I began to have trouble with the buttons to adjust settings. The negative button was recessed into the housing due to poor machining, I could only press it in with the tip of some tweezers and couldn't use my finger. This made adjusting the settings really difficult. In wattage mode it was mostly working well, however I noticed voltage drop that was pretty extreme and the battery was draining faster that it should. I found out this is due to the really poor construction and wiring. I was unable to use it in temp control, with a build that works flawlessly in other boros. The wiring was so poor that the resistance jumped and the current flow was inconsistent.
I thought whatever, its not ideal but I still like the shape and look of the mod. Then it started shorting in a way that bypassed the dna board. When this happened, the resistance steadily increased to 1.99, then a somewhat loud pop and spark came from the negative battery contact and the mod shut down. Surprisingly this didn't kill the mod so I tried it again and it continued to happen. At this point the mod was unusable and probably unsafe to fire.
When I opened it up to try and troubleshoot (which was very hard with the screws in horrible condition) I found the horrible build construction. All soldering was extremely bad, the wires were bent and shoved in there haphazardly, The boro connector was thin and made of aluminum, and was glued together in way that made it non-serviceable. At this point the mod was completely done and I contacted 3fvape for a refund.
3fVape customer support was very helpful, and I was able to troubleshoot it with them and eventually sent it in for a refund. The whole process was pleasant and I was grateful that they have such a good support team. I have not seen any other reviews or heard of anyone else with this clone, its possible that other models are flawless but I can only review the model I bought. Hope this was helpful.

Adding some keywords because I want this to be visible on google: French Plus clone review, French Plus Vape review, French Plus boro Review, French Plus Mod review

Follow the link to learn more. https://forms.gle/kZxqaFtB5WYQ7xBU6

Has anyone else notice the Flum Float Strawberry Ice Cream has been tasting different? I’ve bought a lot from a few places and they taste fake maybe? I can’t find a good one. Help? T.I.A!!

Has anyone tried these?

I dont like inhaling out of plastic encased heating elements. I haven't been able to find one yet.

Looking for auto-draw and replaceable pods or coils, small and light.

Anyone else had any luck?

So far in Chicago they only have posh max which don’t even hold a candle to flums. Does anyone know where I could get a Flum i neeeeed

I stocked up on batteries and carts a while back and now that I am running low, it looks like every company I dealt with has gone out of business. Anyone have a recommendation for an online supplies buy batters and cartomizers? I started with Volt from smokeless image then G6. any help is appreciated

Hello everyone, So my wife currently smokes those rechargeable hyde sticks and they seem to have gotten expensive (32.99 per) so i was looking for an alternative for her that way she can just spend on the juice rather than more hyde sticks. What would you guys recommend? Also for me i used to have a kangertech dripbox but it broke and hasnt worked in months and since they dont sell those anymore i wanted to see what compares with it specially the smooth big smoke i used to get from it. Thanks ahead.

All the flavour has gone from my liquid in a coil that was fitted just over a week ago, I'm using 18.0 W is this too high for CBD?

So I recently ordered off of discreetvapes.com and now whenever I try to go onto that website at all to track my order or just browse the website from any device it gives me an error message and tells me to go back to the previous page. Is anyone else having this issue?

Hi there. Am hoping to find an affordable cigalike kit to purchase… something that isn't too heavy to hold between your teeth without having to hold in your hand. With non-chemical flavour and a substantial throat bite. And available in the UK. Could you recommend any vendors?

Hey les nuageux,

Vous êtes à la recherche d'une expérience de vapotage exceptionnelle ? Découvrez l'atomiseur Titan de Titanide. Est-ce le choix ultime pour les vapoteurs exigeants? Dans cette nouvelle vidéo, je vais vous montrer en détail ce que cet atomiseur a à offrir, des saveurs incroyables aux nuages impressionnants ? Alors, ne manquez pas cette occasion de découvrir si Titanide est le choix incontournable pour les vapoteurs passionnés. Cliquez dès maintenant sur la vidéo et découvrez ce que l'atomiseur Titan a à vous offrir !

https://youtu.be/sEtOgsQFe5o

#vape #vaping #vapecommunity #vapefam #vapelife #vapeon #vapestagram #vapeporn #vapenation #vapejuice #vapegear #vapesociety #ecigarette #vapefrance #vapefrench #atomiseur #atomizer #titanide #titanatomizer #vapequality #vapeflavors #cloudchaser

Do you know where can i buy smok stick v8 ?i searched everywhere and i cant find it, i know its old.

I don’t push my pod in all the way and leave space between the device itself and the pod. I’ve heard this helps it does not. Every time I use a new pod it’s fine for about 2-3 days then it starts to leak from the bottoms, from the side where the black mouth piece meets the clear pod window. What is going on? Am I just buying bad packs of pods? I feel like I never use to have this problem w my novo until the last few months.

My vape took its last breath on Super Bowl Sunday, (luto brand) since Sunday I have had this flemmy cough and I’m pretty sure it’s my lungs clearing out Wtv I was inhaling for the past 2 years. Anyone else have this happen and for how long?!? Btw I’m doing pretty good off the vape and looking to keep it that way.

Hey, does anyone know where to get a t-priv even tho they have been discontinued, maybe someone has one or knows where to get one.

Wotofo Profile M RTA

Introduction

The Profile M RTA is the 5th of the Profile range by Wotofo. It was released about two years ago. This is a compact 24.5mm RTA with top airflow with a very good look. It also comes with a 3.1 ml liquid capacity tank with an extra 4 ml capacity bubble glass.

Box Includes

1 x Profile M RTA 1 x Extra 810 Drip Tip 1 x PCTG Bubble Tube 4ml 1 x Clapton Mesh A1+Ni80 0.15Ω 1 x Classic Wotofo Mesh A1 0.18Ω 1 x nexMESH A1 0.13Ω 1 x User Manual 1 x Bending Tool 1 x Accessory Bag 1 x Cross Head Screwdriver 3 x 6mm Thick Cotton Strip

Specification

Height: 27.8mm (without drip tip & 510 pin) Diameter: 24.5mm Drip tip: 810 resin drip tip Capacity: 3.1ml (4.0ml bubble tube included) Filling method: Top filling Airflow type: Top airflow Coil Type: Mesh coil Insulator material: German PEEK Threading: 510 thread

Design & Build Quality

Compared to Profile Unity and Profile RDTA, this is small. Bigger than the Gear RTA but shorter than Druga RTA.

I really love the look of this RTA. It's small in size and compact which is great. My tank is silver but six other colours are also available.

The deck is very familiar if you owned any of the Profile Atomizers before. It has the same familiar layout as the RDA. It has some nice knurling around it: It is not just good looking but it makes removing the deck a breeze. Below, where the mesh and wicks places, a spring loaded insulator that keeps the wick pressed up against the cotton. This was the main reason for profile's great success. Since then so many mesh atomizers have cloned this design But Wotofo was the first to introduce a method for fitting a mesh coil in a rebuildable that actually worked. Then the top airflow that hits a total of 38 holes on the chamber.

Building

Method of Installing the mesh strip into the deck is exactly the same as any other profile deck. In the box you get a rod for rolling the mesh strip to the correct shape. Bend the mesh around the rod, open the clumps, put the mesh in, tighten it up and reshape it (if needed) with the thin side of the rod.

Now comes the wiking, where either you succeed or fail with mesh atomizers. It might be easy for experienced mesh builders but when it comes to newcomers i would recommend a tutorial video and paying full attention for getting this right. Mesh needs a thicker wick than the standard coil. Use the wick given and slowly press down on the spring in the centre as you feed the wick through. The wick needs to be tighten to the coil but not too much tight. Then try to fluff the wick good. I finds fluffing the cottons really helpful every single time i cut it, because there’s much of it and the only thing you don’t want with mesh is a hry hit. When it comes to trimming the cotton, it does need a good trim. I'd advise trimming it very gradually before and after you put juice on the cotton. Go with the outer end of the RTA and then trim diagonally across the tops to lose some of the thickness. You need to cut it in a pyramid shape of sorts. Then put the cotton ends through the side hole on the both sides of the middle spring. Juice the coil and cottons properly. Assemble the upper parts of the atomizer. Fill up the tank and leave it for 10-15 minutes to let the coil & cottons soak properly.

Performance

My experience with Profile M RTA was really very satisfying. There are a lot of thing that i like about this atomizer. I'm using this atomizer for the last 8 months and i started loving it from the beginning. I use clapton mesh which is the most important part here. About airflow, when i first saw it, i was in a little bit of doubt about top airflow design. But i was wrong. The airflow of this atomizer is really good. For me vaping at 60W with the airflow closed down halfway, this thing works like a dream! The flavor is top notch, and the vapor is so dense you can cut it with a knife.

Conclusion

If you’re on to a flavourful compact mesh RTA that not only looks stylish but also delivers a top notch vaping performance then Wotofo Profile M is the one you’re looking for. It's like a dream for vapers. Super easy to build on, comes with an accessory bag and tools. Overall, this is one of the best mesh rebuildable atomizers on the planet. Another one just has been released by Wotofo just a month ago which is Wotofo Profile X RTA. (I will review that soon)

Pros

Modish design Top airflow Compatible with both mesh and standard wire coils Easy to build Excellent performance

Cons

Small e-liquid Capacity Long Atomizer

Thank you

Bob Stone

Wotofo Profile M RTA

Introduction

The Profile M RTA is the 5th of the Profile range by Wotofo. It was released about two years ago. This is a compact 24.5mm RTA with top airflow with a very good look. It also comes with a 3.1 ml liquid capacity tank with an extra 4 ml capacity bubble glass.

Box Includes

1 x Profile M RTA 1 x Extra 810 Drip Tip 1 x PCTG Bubble Tube 4ml 1 x Clapton Mesh A1+Ni80 0.15Ω 1 x Classic Wotofo Mesh A1 0.18Ω 1 x nexMESH A1 0.13Ω 1 x User Manual 1 x Bending Tool 1 x Accessory Bag 1 x Cross Head Screwdriver 3 x 6mm Thick Cotton Strip

Specification

Height: 27.8mm (without drip tip & 510 pin) Diameter: 24.5mm Drip tip: 810 resin drip tip Capacity: 3.1ml (4.0ml bubble tube included) Filling method: Top filling Airflow type: Top airflow Coil Type: Mesh coil Insulator material: German PEEK Threading: 510 thread

Design & Build Quality

Compared to Profile Unity and Profile RDTA, this is small. Bigger than the Gear RTA but shorter than Druga RTA.

I really love the look of this RTA. It's small in size and compact which is great. My tank is silver but six other colours are also available.

The deck is very familiar if you owned any of the Profile Atomizers before. It has the same familiar layout as the RDA. It has some nice knurling around it: It is not just good looking but it makes removing the deck a breeze. Below, where the mesh and wicks places, a spring loaded insulator that keeps the wick pressed up against the cotton. This was the main reason for profile's great success. Since then so many mesh atomizers have cloned this design But Wotofo was the first to introduce a method for fitting a mesh coil in a rebuildable that actually worked. Then the top airflow that hits a total of 38 holes on the chamber.

Building

Method of Installing the mesh strip into the deck is exactly the same as any other profile deck. In the box you get a rod for rolling the mesh strip to the correct shape. Bend the mesh around the rod, open the clumps, put the mesh in, tighten it up and reshape it (if needed) with the thin side of the rod.

Now comes the wiking, where either you succeed or fail with mesh atomizers. It might be easy for experienced mesh builders but when it comes to newcomers i would recommend a tutorial video and paying full attention for getting this right. Mesh needs a thicker wick than the standard coil. Use the wick given and slowly press down on the spring in the centre as you feed the wick through. The wick needs to be tighten to the coil but not too much tight. Then try to fluff the wick good. I finds fluffing the cottons really helpful every single time i cut it, because there’s much of it and the only thing you don’t want with mesh is a hry hit. When it comes to trimming the cotton, it does need a good trim. I'd advise trimming it very gradually before and after you put juice on the cotton. Go with the outer end of the RTA and then trim diagonally across the tops to lose some of the thickness. You need to cut it in a pyramid shape of sorts. Then put the cotton ends through the side hole on the both sides of the middle spring. Juice the coil and cottons properly. Assemble the upper parts of the atomizer. Fill up the tank and leave it for 10-15 minutes to let the coil & cottons soak properly.

Performance

My experience with Profile M RTA was really very satisfying. There are a lot of thing that i like about this atomizer. I'm using this atomizer for the last 8 months and i started loving it from the beginning. I use clapton mesh which is the most important part here. About airflow, when i first saw it, i was in a little bit of doubt about top airflow design. But i was wrong. The airflow of this atomizer is really good. For me vaping at 60W with the airflow closed down halfway, this thing works like a dream! The flavor is top notch, and the vapor is so dense you can cut it with a knife.

Conclusion

If you’re on to a flavourful compact mesh RTA that not only looks stylish but also delivers a top notch vaping performance then Wotofo Profile M is the one you’re looking for. It's like a dream for vapers. Super easy to build on, comes with an accessory bag and tools. Overall, this is one of the best mesh rebuildable atomizers on the planet. Another one just has been released by Wotofo just a month ago which is Wotofo Profile X RTA. (I will review that soon)

Pros

Modish design Top airflow Compatible with both mesh and standard wire coils Easy to build Excellent performance

Cons

Small e-liquid Capacity Long Atomizer

Thank you

I just tried vuse rich mix and absolutely love it. Anyone know of a nic salt bottle that tastes like this???

hi ! Everything is in the title, I need a new one, what do you recommend ?