Probably a really silly question but here goes.

I’m waiting for my crafty to arrive and some magazines with capsules. I’m wondering if I can just turn out a used cap straight back into the magazine. I know the magazine is plastic but is it heat proof plastic ?

Sounds daft but I’m thinking about doing this (if safe) so I can do back to back capsules on the move.

Hi guys.

I just got my first prescription and have decided to use the mighty as my vape. I was wondering at what point in the bowl is too full? I filled it right up to the top just before the curving point and seemed like I was vaping it forever, when I emptied it some was still slightly green on the top, however the cannabis throughout the middle and bottom had turned brown like coffee beans. I’ve read online that’s when it’s finished however I am assuming I filled it too high if there were still green patches on the top.

Secondly I was wondering if I need to leave the lid off after use to allow it to cool down or if it’s just fine left as it is. I was also wondering how and how often I should clean it?

Loving this bit of kit so far and any advice would be massively appreciated.

Thanks.

So earlier this year, my Mighty started having charging problems where it wouldn't charge sometimes when plugged in. I took a gamble and ordered a new charger to see if that was the issue, and turns out it was. 3 months later, my new charger wasn't charging my mighty at all. I found a 12v ,1amp charger and tested that; it started slowly charging the Mighty. It seems the SB charger is prone to failure from the research I found.

Hope this helps anyone with issue in the future.

That. I've googled it but couldn't find info about it. I'm talking about the consumed herbs of the mighty, store them and roll one with the byproduct. I'know you can cook with them, just wandering if its worth it.

Baby and wifey sleeping, it's time mighty plus

I ordered a Volcano Classic on the first day of their “Black Friday Sale”, 6 or 7 days ago. The order processed and then went to a “captured” status for the last 5 days. Is anyone else experiencing these issues. Obviously it’s Thanksgiving and things are probably short this week but saw this same issue arise a few years back and wanted to bump it up. Happy Turkey day

Hello, my friends. I have had a Migthy+ for 2 years and I saw the launch of the Venty and I confess that I was curious, is the upgrade worth it or will it not be that different from my Migthy+?

Hey there, I'm considering buying either the crafty+ or mighty+. I smoke only on the weekends and usually just at my place so no need to have a big battery life. From what I've seen the battery and size seems to be the main thing, but is the mighty better quality than the crafty in any other way or is it just that?

Does anyone know how mutch they charge to replace a crafty battery , it states on theyre web that they DO give this service.

On the other hand,dif anyone recently change battery themselves?Ive seen some people claiming that it does not work due to some update?

Is that the case on the og pr just the “+”?

Id just like to be able to revive them if they die…

Hey there.

Had my mighty for a bit and it's well taken care of, though I never opened it apart and cleaned the heating chamber itself.

Recently it started behaving weirdly — I would pack an aluminum capsule with flower (well grinded) and start vaping, and after roughly 3-4 minutes it starts getting absolutely zero pulls. The airflow is intact, I tried playing with the lid thingie with the 'Mighty' logo on it and having it closed and open, I've cleaned the cooling unit thoroughly with rubbing alcohol, swapped the rubber bands, and no matter what I do it still does that every session.

Any thoughts? Is it actually time to open it apart and thoroughly clean the heating chamber? Could it be something else that I'm missing?

Thanks for any help.

Titlee

I recently got a venty and am happy w it lol

Hry so i got a mighty OG and just had an issue where it seems like its really tough to pull on, i have taken apart and its soaking in iso now just to see if its gummed up a bit.

I clean it 2-3 times a week its about 8-9 months old seels look good any other reason i might have this issue?

Edit**So its had a thorough clean and all screens changed still drawing poorly, interestingly the seel for the heating chamber that latches on to the cooling unit does appear to be larger almost swolen, i will get a replacement see if that works better but may have to go back to b&s 😭

I want to open the case of a mighty+. There are plenty of videos about opening a mighty, but I've only seen one (a couple of months ago) for the mighty+ and now I can't find it again.

I know it has to do with, "Push here and twist there" but I can't for the life of me remember, and I can't find the damned video.

Any help?

I got the OG Mighty with DC Plug, so i got the normal DC Charger and in my opinion it just sucks. Its just a matter of time until the cable will break, its so stiff, i hate it so much every time i touch it and just want to replace it.

I know i need a 12v 3a 36w Charger with 5,5/2,1/9.5 mm DC Plug.

But i can't find a proper one, just random chinese stuff which will explode or just die on me in no time. Or with stiff cheap cables like the OG Charger.

Is someone in here using a reliable Charger which you can recommend to me? I look for a small DC Charger with a flexible cable, maybe even sleeved, maybe longer then the old one and also with a ferrite core on the cable just like the OG Charger has.

I also looked into extension cables but as it seems they often lose too much power and can't properly charge then since the cable is just too long and its not meant for devices which use that much power, more like for low powered devices.

Please help me, thanks

So after owning the original digital volcano for a decade I decided to pickup their top of the line portable unit.

It took me a few weeks/months before I was able to dial in the volcano so I would love to hear about any tips or tricks this community might have.

I’ve read a lot about it already so I’m hoping to avoid the error code but other than that I can’t wait to get started !

I own some Dynavap, Pax 2, Pax Plus and Crafty+ USB C and about to buy a new one, but since I live in Brazil and the warranty would be a pita I don’t know if the Venty is a good decision, I’m afraid of all the issues the device is having, on the other hand I know the Mighty+ is a real work horse, I really wanted to buy the Venty but I started to think that the Mighty would be a better buy.

Do you guys know if the Venty still now have problems? Am I thinking correct?

Hi. So after a year of constant use my Mighty seemed to stop hitting as well. I usually use it for one cycle at 190 and that’s sufficient for a session and that would hit continuously through the whole cycle. Now I’m only getting 4-5 hits then the vapor stops. Even if I crank it to 210 at that point, very little vapor comes out.

Could I be packing the cartridges too tightly? I put one in my lips and was able to pull through it very easily.

Thanks!

Got a mighty+ after being a pax3 user for a long time. My understanding is that they both need to be packed in tight, so I carried the practice over. When I use the mighty+ at 210F (max temp), the AVB is still pretty light colored - like leather (see pic). I’m used to it becoming almost black post-session. I use the AVB to make butter so nothing is wasted - but I’m used to getting more out of the device. Defective? User error? Thanks!

Never leave home without it

Hi there. I've had my Mighty+ for about 2 years, and recently have been getting Err04 messages (I sent them a photo), alongside my screen taking a shitter on me. Completely blackened. I sent them a video of this issue.

My request was approved, but they only sent me a packing slip. Am I supposed to be paying for return shipping? just wondering

I decided to buy the Dynavap M7 for single puffs (it arrives this Thursday) and on Black Friday I will buy the Mighty+ (unless the Venty has a really good offer). I wanted to buy isopropyl alcohol to clean but 100% pure alcohol doesn't exist and they all have 0.1% benzalcoholic chloride... Chat Gpt says that 0.1% is very harmful and I shouldn't use it to clean vapers... How do you do it?

Anyone got tips for cleaning the s&b cases…? Was thinking of a wet wipe (baby wipe) to latch on to the bits of weed/avb in my venty case without harming the material

earlier this year i upgraded from a firefly 2 to a mighty+ and i seem to be going thru flower twice as fast — i go thru a quarter at the same speed i used to go thru an eighth, despite not vaping any more frequently.

the only thing i can think of is that w/ the mighty+ i’m using dosing caps, and i never did with the firefly 2 ???

am i alone in this? it’s really annoying lol

Have app downloaded on apple device and just used it a few hours ago. Now my device won’t connect? I have also tried to restart my device, connect without Wi-Fi, and have tried Nuviu which didn’t work.

Edit: solution found by going to S&B support page for resetting device when having connection issues

Oh my gosh and golly god.

2-3 months having not cleaned the CU in the Mighty+, stuck it in some milk and butter.

Oh my gosh.

Does anyone know of any sort of portable case that would fit the Storz & Bickle Mighty vaporizer inside it while it has a bong adapter on it? I know they sell the medic case but I’m looking for a longer case that could have room at the top to have the bong adapter on it as well so it’s not touching the sides or anything when I’m taking it on the road. The bong adapter I use is the one from Planet of The Vapes. It’s rubbery and then has a glass insert to go into a bong. It sticks out about 1-inch.