BrewGearFS Etiquette

Just wanted to share that Foeder Crafters of America recently launched a limited run of a homebrew foeder! Size of the baby is just over 10gal, with overall dimensions of 22" by 18". You can find out more on our square site: 10 Gallon Foeder | American Oak LLC. Preorders end Nov 1.

I have a large stock pot, two 5 gallon carboys, several 1 gallon carboys boys, fermenting buckets, bottling equipment:l, and a ton of swing top bottles. Everything you need to start brewing. It’s a little dusty from lack of use. Bring your own tote or boxes for the bottles as I want to keep the ones I have. Take it all and bring me a six pack of your favorite beer is all I ask.

5gal setup. Pretty much everything included except the personalized mash paddle. Pics in the comments. Looking for $1k

Never been used. Maybe $40?

Either in the Denver area or I can ship.

Can't drink beer any more and no longer interested in brewing... I have a pretty good setup that's only been used a handful of times so everything's in great shape. Willing to meet up at some midpoint pretty much anywhere in MD/DC/NOVA/Southern PA. I'm looking to get around $400 for the full setup listed below. DM me for more details/photos if interested.

Anvil Foundry 10.5 Gallon AIO Brewing System 220v (or 110),
Anvil circulation pump
2x 7 Gallon stainless steel Anvil fermenters
SS wort chiller
HYDRA copper wort chiller
Refractometer
Bottling equipment (tubes, capper, etc.)
48x glass 22oz bottles

Pump is in great condition and used a handful of times in a small commercial operation but it ended up being not as useful for our application as we had hoped. Comes with a brand new impeller. Brand new this is listed at $239.

Also have 19ft of high-temp silicone line that was bought to be used with the pump. It's cut into 3 sections.

Please DM me if interested.

This post comes from /u/rileydogdad1

Friends,

My son and I have been brewing for 10 years and are kegging more often. We do bottle beers we age, but I am finding we have way too many bottles. In particular we prefer 16 oz bottles and want to get rid of our 32 oz bottles. I have 20 or so and they are clean and in great shape. DM me and I will give them to you.

DM /u/rileydogdad1 if you want them. (Replies and DMs to me will not get a response.)

A lot of stuff: I can send pics or answer questions if needed…

Blichmann G1 Boilermaker 55 Gallon with False Button, Upgraded G2 Valve w/ HopBlocker

Blichmann G1 Boilermaker 30 Gallon with False Button, Upgraded G2 Valve w/ More Beer Ultimate Sparge Arm

Bayou Classic 122-Qt. (30.5Gallon) Stainless Steel Pot w/ Diptube w/ 3-Piece Valve (HLT)

Two Speidel Plastic Fermenter - 120L (31.7 gal)

3x 18" Burner Stand (Comes w/ Propane Burners & Regulators)

1x Natural Gas 32Tip Jet Burner (Currently installed on 1x above stand)

1x Natural Gas 32Tip Jet burner

1x Chugger Pump (stainless) Cart with BrewMometer & Quick Disconnects

1x Blichmann Top Tier Burner w/ Natural Gas Converter & Leg Extentions

Chiller Cart parts Below, The chiller cart attaches directly to your boil kettle. As the pump pulls the wort from the kettle it goes through the hop rocket (usually filled with fine mesh bags as a filter) which blocks any trub from entering the chiller plate as the wort cools. As you can see, after the chiller plate I have a flow control unit at the end which monitors wort temp before going into the fermentor. You can push the beer directly into the large fermentor OR go into the PET carboys (as shown) for easy transport to the final fermentation location.

1x Seville Industrial All-Purpose Utility Cart

1x March 809 Pump w/ Quick Disconnects & Foot Control

1x Blichmann Hop Rocket (used as trub filter)

1x Blichmann Therminator Chiller Plate w/ Quick Disconnects

1x Flow Control, Blichmann G2 Valve & BrewMometer

25' of replacement 1/2" Silicone Tubing

This one hurts to put up, but after getting married and having a kid, the realization has set in that I just don't/won't have the time for homebrewing as a hobby. This is basically everything you need for a 10gal all-grain setup. I also have a bunch of Brewing books - will take offers for those.

• Homemade 2-Tier Brew Cart (all wood)

• 1 Keg converted to Brew Kettle (w/ valves and fittings)

• 1 Keg planned to be converted to HLT (no mods except polished, cut top, and sanded smooth)

• Coleman Xtreme 70qt Cooler (used as Mash tun, with valve installed and homemade copper manifold)

• Monster Mill MM2 (with hopper and base)

• 5 Bubbler Plastic Carboys (4 6-gal, 1 5-gal: 2 or 3 of these are unused)

• Darkstar Burner and a second banjo-style burner (second not pictured)

• Misc. Buckets (incl. ~7gal pot I started with and did small test batches later)

• Misc. Tubing with quick connects

• Homemade copper immersion chiller

• Oxygenation 2.0 kit

• Chugger Inline Pump Stainless Steel (with fittings and valves)

• Duda 30 LONG Plate Chiller (Garden hose and tube connections)

• Extra tubing, lungs, airlocks, hydrometer, caps, capper, whirfloc, gypsum, PBW, oak cubes

• STC-1000 Temperature control for Fridge

• Thermoelectric Unlimited Stir Plate (used with 2000ml and 5000ml Flasks for yeast starters, with various stir bars)

Looking for ~$800 for the above setup, located in the North Hills.

Images here: https://imgur.com/a/RBQDdnB

CELINA, TEXAS DALLAS FORT WORTH METROPLEX

I have two 7.5 G stainless steel kettles with thermometer and ball valves. Asking $100 each.

I have one 7.5 G stainless steel Anvil bucket fermenter. Missing racking arm. Asking $80

I have one Anvil Forge propane burner. Asking $60.

I have two FerMonsters. One is 7 G and one is 6 G. Asking $20 each. The 7 G will need a new lid. Has a small crack in lid.

I have one stainless steel immersion chiller. Asking $40.

Hey homebrewers - Up for sale is my sanke keg based homebrewing system. I've used it to create many 10-12 gallon batches of beer over the years but I've decided to sell because I'm moving into a smaller space.

The welds are all stainless, done by a Marine welder for me almost 8 years ago. They've held up great and the system is really easy to use and makes great beer.

Included:

• Kettle with sight glass and valve, heat shields and lid.

• Hot water pot with sight glass and valve, thermometer, heat shields, and lid.

• Insulated mash tun with fals bottom and valve.

• Hoses with appropriate quick connects.

• Chugger pump with quick connects.

Priced for a quick sell: $300 CASH for the whole kit as pictured at the link below.

https://imgur.com/a/joxFSvw

Thanks!

I have upgraded to electric and wish to sell the following:

1. Blichmann Hellfire Burner
2. Spike 15g kettle with NPT ball valve and thermostat
3. False bottom and center drain tube to use as a MASH TUN.
4. Side dip tube for boil kettle.

$300 for everything. $125 for the burner and $200 for kettle and accessories. Not willing to ship, but I will meet within a reasonable distance.

Make me an offer!

Homebrew equipment - looking to get rid of everything

I’m located in Southwest Ontario - I home brewed for about 5 years and have a bunch of supplies I’m looking to get rid of. We have little kids and I have no expectation of getting back into this for a while. I can send pics if anyone is interested. I’d like to get a bit of cash for everything, but not looking for a lot. A brief list below

4 x 5 gallon kegs 2 x 3 gallon kegs 4 x 7 gallon glass carboys 8 x 1 gallon glass carboys Yeast prop kit (stir plate, 2L & 1Lflasks) Brewzilla all in one electric set up 15 gallon kettle Burner pH meter Wine bottle Copper immersion chiller 4 taps for kegerator Spunding valve Bunch of other misc stuff collected over the years

If you’re interested send me a message and we can chat. Thanks!

I've got a once-used Jaded Corny Pillar Chiller that's been collecting dust on the self. Looking to get it to someone that will actually use it rather than holding onto it.

Will ship within the continental US. Looking at $125 all in.

Let me know if you've got any questions or are interested!

Please reach out/DM to figure out transport/pickup. I’m in the Chicago metro area.

Spike Solo 10gal 120v is $1755 retail so I’m selling for $877.00

Spike Solo 20gal 240v is $1975 retail so Im selling at $987.00

Flex+ with Temp Controller is $775 so I’m selling for $387.00

Can provide pics upon request.

Edit: No interest in the full lot, so feel free to make an offer on any individual pieces. I'll cross things off as they go.

Hi all,

I've decided to vastly scale down my homebrewing operation, and unfortunately have to part with the following:

• Keggle: 15.5 gallon sanke keg converted to a weldless keggle. It has a good-fitting lid, and a Blichmann brewmometer. It is in need of a valve, but the hole is already drilled for a 1/2" NPT weldless bulkhead -- I just had to steal the valve for something else.
• Immersion Chiller: This is a homebuilt contraption centered around a 50' copper immersion chiller, integrated with a lid that fits the keggle. The input and output are both standard garden hose fittings. The lid also has a built-in stirring motor and paddle. I used this to be able to whirlpool or chill without having the wort exposed to the air, minimizing the chance of infections. The stirring motor is small, but is surprisingly good at accelerating chilling. Bonus: because the immersion chiller hangs from the lid, it lives in a 15 gallon Igloo cooler I'll include. This could be converted to a mash tun if you'd prefer to just hang up the chiller somewhere.
• Corny Kegs: Four Cornelius kegs. They're former soda kegs, so they have some wear and tear, but all four are in good shape, aside from needing a good cleaning. Bonus: I'll include several sets of replacement silicone o-rings, including lid gaskets. Bonus bonus: I just remembered I have a Mark II Keg Washer. I'll include that, too.
• Kegerator Parts:
• 3x Perlick 630ss taps, with stainless steel tailpieces and shanks.
• 50ft 3/16" Bev-Seal Ultra Barrier Tubing, never used
• CO2 regulator, with gas line and ball lock fitting.
• 5lb CO2 tank, aluminum. In great condition, but needs recertification.
• Miscellaneous: I have a decent capper and hundreds of caps, a small false bottom for the kettle, a 6 gallon Better Bottle fermenter, and lots of other odds and ends I'm happy to include. I also have a pound or three of hop pellets, various varieties, dating to 2018-2019, but kept in purged or vacuum-sealed foil pouches in a deep freezer the entire time.

$225 takes it all, else I'll go with the best offer I get in the the next seven days. Pictures available on request. I will consider breaking out individual items if nobody wants the whole lot.

Located in the west valley. I cannot ship, but will deliver within the Phoenix metro for a reasonable fee.

Happy to answer any questions.

I am finally getting rid of my starter supplies for brewing which include a 1 gallon glass Carboy, a couple of thermometers and a manual bottle capper tool. If anyone is interested, please let me know! They are free to a good home.

Because I work full-time as a brewer, I am selling my homebrew equipment in DFW, TX for $400 OBO. This is an 8-gallon all-grain system.

• 8 gallon kettle, 8 gallon mash, 8 gallon HLT pot
• Glass & plastic carboys
• Hand-crank mill
• 1 pump
• Immersion chiller
• Lots of extras, like cleaning brushes, funnel, strainer, capper & bottle filler, water meters, water test kit, various tubing

You can find photos here: https://dallas.craigslist.org/ftw/for/d/fort-worth-all-grain-homebrew-system/7786242247.html

I would love to sell as a set but am open if you want specific items! Message for more info.

I am in search of kegs under 6 gal. Ship to or meet in Tuscaloosa AL. Would prefer PET or similar but SS is good too.

1/2 barrel and 1/6 keg shells for sell, stems have been removed and I can cut off the top to make a pot before mailing, or left as is to be used as a still

100$ 1/2

50$ 1/6

Used this setup for the past 8 years or so. Purchased new from BeverageFactory back on 03/04/2016, and it's been in both of my keezers. Always worked flawlessly for me. Comes with outlet barbs on both ends. If you do not want to pass-through just replace with an NPT plug on one end. No cracked gauges. Nothing inoperable. Everything works and looks as it should.

Model is T1694STC-01 - with check valves.

Asking $150 OBO. Open to shipping. Let's chat.

Thanks!

https://imgur.com/a/tLun7uR

PLEASE DO NOT USE CHAT FUNCTION ON REDDIT. PM ONLY. I only use old Reddit and mostly on a mobile app, so I do not see chats.

Pour My Beer/Micro Matic 8 tap customer self serve Kegerator Unit charges per oz.

-Slightly used and in pristine condition. -IT equipment included -Toast POS integrated system included w/cash drawer and receipt printer. -Owner will coordinate shipping process but shipping will be the responsibility of the buyer. -$29,500.00 $19,500.00

Pictures and more contact details can be found on Probrewer here https://probrewer.com/classified-ad/pour-my-beer-micro-matic-8-tap-kegerator-unit-w-integrated-toast-software/

Link to Facebook Marketplace Post: https://www.facebook.com/share/pybFrphvEJuToz5C/

Good luck finding anything else like this! I built this all myself a few years ago as a prototype and am selling so I can build a new one with a different aesthetic. Everything works great! Asking $1500 for everything.

This listing contains literally EVERYTHING (besides ingredients) you need to get started right away brewing your own beer (and have a blast playing video games in the process).

Overall dimensions: 65” tall x 301/2” wide x 20” deep

See info below about the various parts:

The keezer part is accessible by lifting off the arcade machine on top. I am selling with just one keg, but it can comfortably accommodate two, plus the included Co2 tank & regulator. To add a second keg, you’d need to simply drill another hole in the wooden keezer collar and add a tap handle. I can potentially include a 2nd keg for an extra fee. The freezer is an LG brand and the temperature is controlled with an Inkbird freezer temperature controller, mounted outside. It all works great and I have had 0 issues with it. It has a tap handle on the left side and a magnetic/detachable drip tray below. Two cup holders are mounted on the front, to hold your beer while you play games..

The arcade machine is built with MDF and is fitted with a Raspberry PI microcontroller running RetroPi. This system allows you to emulate games from various gaming consoles. If you are handy with a computer, you can add your own games but I have a few old school arcade games loaded already. All of this is connected to a 34“ Vizio TV and two sets of backlit arcade machine style buttons/joysticks. These controls can be customized to do different functions/actions within the RetroPi settings. The marquee on top reads ‘Ghost Munch’ (like a generic PacMan, get it?) and has a button on the back that turns a backlight on/off. Its a blast!

For brewing: I am including a Fast Fermenter conical brewer with a custom rolling stand, a tall brew pot, and a stirring paddle, plus a few extra cleaning items.

Here is a list of everything included:

-Keezer (LG brand), currently drilled for one tap handle
-Arcade Machine (powered by a Raspberry Pi with RetroPi OS)
-Inkbird Temperature controller
-1 Keg
-1 Co2 tank
-Co2 tank regulator. This one is a little beat up, but works just fine
-Fast Ferment Conical Fermenter (Plus wall mount hangers)
-Air Lock for Fast Fermenter
-Custom built wooden stand that allows you to easily roll the Fast fermenter around
-Brew pot
-Stir paddle, bottle wand, spray bottle
-Various connectors/tubing/grommets/tape to hook everything up properly and ensure no leaks

Comes with all hoses, taps, regulator, two co2 tanks, and 5 kegs. Located in Southeast Texas. 1000$

After a deep discussion with my family, I am hoping to pass along my extract brewing setup to someone who will continue to use it.

It's all pretty beginner gear- a GigaWort brewer, some 5 the gallon buckets, a bunch of bottles, etc. Its literally everything you would need to make extract beer.

Just dont brew anymore (mostly because I do Keto now). So trying to sell my setup. Wasn't sure if it's allowed on here or not. Trying to get $450 for everything which feels pretty fair. DM me if you want pictures or any questions. I'm located south of St. Louis MO, willing to drive up to an hour to meet someone.

Anvil Foundry 10.5 Gallon AIO Brewing System 220v (or 110),
Anvil circulation pump
2x 7 Gallon Fermonstor Carboy w/ Spigots and airlocks
SS Wort chiller
PDW cleaner half used
StarSan Cleaner 1/4 used
8.5 Gallon Stainless Steel Brew Kettle w/ thermometer port
stainless ball valve, internal volume markers
Copper Wort Chiller
Food Grade Bucket for bottling
Hydrometer for making key sugar measurements
Transfer Tubing
Bottling Wand with shut off valve

Can throw in a ball lock keg too, and a Pliny brew kit that I havent used yet.

https://www.facebook.com/marketplace/item/505870828569772

I used to brew but don't have the time or interest anymore. Selling off the remainder of my equipment. Photos in the CL post below. Thanks!

https://albany.craigslist.org/for/d/delmar-beer-brewing-supplies-and/7771391569.html