/r/StudioOne
A Subreddit for Users of Studio One
r/StudioOne is an educational tool. Please post anything related to Studio One; compatible hardware and software, synths, VSTs, controllers, etc.
Questions about effects, getting a certain sound, troubleshooting, general or specific production questions and the like are welcome. However, please take notice of a few rules:
A Subreddit for Users of Studio One
r/StudioOne is an educational tool. Please post anything related to Studio One; compatible hardware and software, synths, VSTs, controllers, etc.
Questions about effects, getting a certain sound, troubleshooting, general or specific production questions and the like are welcome. However, please take notice of a few rules:
Rules
TUTORIAL VIDEO PLAYLISTS
/r/StudioOne
I have a recording of an interview I'm trying to clean up in S1. There is one speaker that has a much lower volume and I want them to be similar.
I have messed around with compression to boost the low volume but can't really get it dialed in so they sound natural - the 'loud' speaker stays very dominant.
So far manually highlighting the lower potions, creating events and dragging them up works but its slow and tedious..
Is there a better way?
How do processors with 3D cache feel in a DAW, what is better to choose to work with minimal latency?
Hi
S1 7 PRO starts with an empty song. How can I change it to start with the start page? I've searched how to fix it but without success. I use windows 11.
Thanks
Is it just me or my version of Studio one 5 professional crashes more than usual. It might be CPU management and plugins, but it’s never been this bad in my opinion.
I was thinking of upgrading just for optimisation of Studio one. Thoughts?
I'm new to Studio One and I recently found out about the Retro Mix Legends Mix FX pack that came out a few years ago and wanted to see where I could get it. I found it on the Presonus website but it, along with all other software, seems to be sold out.
https://www.presonus.com/collections/all-software
Can someone please fill me in on what Presonus is doing with this? Are any of these plugins still available for purchase? Have they moved to a different system of obtaining new software? Thanks!
Thought it was my Audient ID44 MKI but its happening on the MKII as well. Korg Prologue are both plugged into the back 1/2 inputs. Input gain is max to really hear it, but this annoying sound is ALWAYS present, even on the input gain almost off. How do I fix this for a clear sound? https://www.dropbox.com/scl/fi/o1om8arenye1buc7f31tz/interface-sound.mp3?rlkey=47et3awzdd771dd6e0pzgidvl&st=ycxczhc5&dl=0
I'm sticking with Studio One 6.6.4 Professional. I have Studio One Pro 7. Thus far, it's a no go for me. I think the Prime, Artist and Professional versions of the app should have remained - not everybody's DAW needs are the same - I dig the "one DAW for all" deal... they took it a bit to literally. I'm just curious - anybody else of a similar mindset?
Hello, I'm just trying to see if I can use older video tutorials from 6.6 or has the UI changed a lot, and as a a beginner will it lead to confusion? This application is very overwhelming there is just so much going on. Where do you start properly?
I used to be able to do this in the inspector tool in studio one 2x but I can’t figure it out for 4.
Ok so im new to DAWs and computer guitar playing. i’ve spent like 3 days trying to figure this out. At first i couldn’t hear any playback but then i fixed it but messing with the settings but there was a huge delay and i could not play with it. So, i looked up ways to fix it, and it said to use AISO drivers. I tried looking up ways to download those for my audio box but i cant find anything. i download AISO4All and set everything in cakewalk to AISO drivers but i cant hear any playback. Guitar is recognized and everything i just cant hear anything. Please somebody help, this is driving me insane.
Let's say I have a section consisting of two violins, a viola, a cello, and a bass in a song. Each of them has an "Expression" automation. My question applies to all automation types, but I'll use expression in hopes of clarifying my question.
Is there any way to have them all controlled by one automation curve? Otherwise I have to go into each one and enter (for instance) a swell.
Right now the best option I know of is to copy and paste from one instrument to the next, but being inherently lazy, I can't help wishing there was an easier way. And if I make changes, things get ugly.
In the specific instance of swells, I could put them all in a bus and automate the volume of the bus but I don't like doing that. (Details on request)
On a related subject, I've never used a hardware midi controller for automation. Is it possible to control the same type of automation for multiple instruments with one controller?
I feel like I need a lot of help with this. If you have experience with these issues, and you have time to tutor, please msg me
Hey guys, is it possible to link the movement of a specific frequency range in the EQ to automate a parameter? I’d like the High Cut frequency to increase based on the motion of, say, 50-100 Hz. Like, when the kick hits, the High Cut frequency would rise. I’ve manually created an automation as an example—you can check it out in the video.
Btw, both the Bass and Drums tracks are routed through the Intro BUS, which has a Pro EQ with automated High Cut frequency.
I use Studio One 5 Artist and I have tons of project files. Which I assume I can use on the other programs. But is the upgrade worth doing? I just wanted to know if there is some niche features that are useful.
I have my Studio One linked to my interface in the input and output. I am connecting my headphones to the interface to listen to backing track. When I record my voice, the backing track I am playing also is somehow recorded in quietly in the background. It is not a issue of leaking sound from my headphones as even if i make my headphones silent and press record, the backing track gets recorded in.
How to solve it?
I currently run S1 6 Artist on my old laptop and it does have performance issues. The current system is as follows: Intel Core i7-10510U @ 1.80GHz, 16 GB RAM, Win 10 Home A5
It is time to buy a new laptop, but what specs should I be looking for? I need a system that will handle S1 7 without any issues. Maybe not the bare minimum requirements, but something that would give me good piece of mind.
hello! As the title says, my meter plugins do not show me the information corresponding to audio generated by a midi channel.
I have this problem on the ssl meter, Studio one's native spectrum analyzer and a few others. Could someone help me with a solution for this midi problem?
thanks !
I’ve created a midi Impact drum track. When I play the song with the track in edit view, it times perfectly with the click. When I play the song in Mix mode it lags the click. Any thoughts on what is going on here are appreciated.
https://www.youtube.com/shorts/D6rDcYclUSQ The kind of swedish house mafia kick turn into a bassline effect.
Normally you would automate the looplenght to increase from a super small loop into the full note. Please some advice on how to do this in studio one. I am not an ableton user anymore. Paid for studio one but have no clue how to do this. Looping points in sample one can not automated.
Even the arrpeggio does not workt because there is not ''free'' movement mode. So it cuts to the next speed.
Any help would be appreaciated. Thanks.
Ive been trying for days to solve this. I have Studio One 7 installed, but whenever i record there is no signal or nothing. Ive trying a lot of suggestions I found online but no success. I even installed Universal Control, changed ports, but still. if I connect my headphones to the interface i can hear thru monitors but when i record there is no signal. Please help. I dont have lots of skills in Studion One, i use it mostly to record my songs ideas.
Has anyone had experience installing licence on Mac while already having an instance running on a PC? I'm looking to get into a remote setup with a mac laptop but already have one of my licences activated on my PC. Does that effect anything? Also do sessions open in mac after being created on PC?
basically the title ^? Ideally so that one of the mono tracks is panned left and one panned right.
I'm learning mixing, specifically mixing vocals. I think I get the basics of how to use two compressors on a vocal, specifically an 1176 to a LA2A.
I also read "start with stock plugins." Studio One Pro 6 has Fat Channel. Which of its compressors (if any) emulate the 1176 and which the LA2A? Are these "good enough" for a beginner like me to learn how to compress vocals?
Thanks.
Command Insert Instrument Parts from Chord Track has a very strange behaviour. I expected to get downward movement in the bass line A-F-F♯-G with the same chords Am. Key signature of project is Am.
What am I doing wrong?
Because I feel like there's a few things that need to be addressed, what is everyone else's thoughts ?
Hey all.
I'm using StudioOne 6.6.2.100548 on Windows 10 with and an AudioBox GO for an interface and an Atom for MIDI control.
I am using StudioOne, particularly for it's performance mode, with a synthesizer and the Atom to control narration sound effects for a marching band show. I have all the samples loaded into an ImpactXT instrument that's mirrored on the Atom, and we use the Full Level toggle to keep the volume consistent. The samples range in time from 1s to about 10s. With some of the longer ones, the sample will start fine, but then stutter or cut off towards the end. The playback line that scrolls across the waveform doesn't seem to line up with the playback either.
I've been able to reproduce this issue without the Atom (using the mouse) or the AudioBox GO (using the system interface) so I'm positive it's something I've got setup wrong in StudioOne.
System specs: i7 6820 33GB RAM Samsung SSD I'm not observing any excessive CPU or RAM usage when this happens
Can anyone point me in the right direction of things to try?