/r/SpringfieldArmory

Photograph via snooOG

You may post whatever you want as long as it is directly related to Springfield Armory or its products. If you have questions or suggestions for this subreddit please message a mod.

You may pick the model and variant of Springfield you would like displayed as flair by clicking the "(edit)" button, which can be found directly above this text, to the right of your username.


Remember Firearm Safety

Everyone is a Range Safety Officer, if it seems unsafe call it for a cease fire!

  • Treat all firearm as if it were loaded.
  • Never point a firearm at anything you're not willing to destroy.
  • Keep your finger straight and off the trigger until ready to shoot.
  • Know your target and what lies beyond.

In addition:

  • Ensure the weapon is safe to fire, a gunsmith is cheaper than a hospital visit.
  • Only use the ammunition type stamped on the barrel or listed in the user manual.
  • Wear eye and ear protection.
  • Alcohol, legal and illegal drugs, and firearms are never a good combination. Do not mix!
  • Keep weapons out of the reach of children, criminals, and other prohibited persons - it is your responsibility to protect your firearms!

Suicide and Guns

Suicide is a serious problem all around the world. If you or someone you know is considering suicide please help them. There are many resources available for veterans and civilians alike. Don't let yourself or another fall to suicide.

Suicide Prevention Lifeline Website or call them at 1-800-273-8255

For international help please visit Suicide.org's Hotline Finder to get in touch with the assistance available to you in your country.

You can make all the difference in someone's life.

/r/SpringfieldArmory

30,049 Subscribers

8

My New Springfield Prodigy Comp

I bought this pistol after seeing Honest Outlaw’s review on it on YouTube. Finally had some time to shoot it and shot 750 rounds of a mix of 115gr & 124gr ammo, both FMJ and JHP. Zero hiccups and I’ve yet to clean it. So far so good 😁

2 Comments
2024/12/01
17:49 UTC

67

Early Xmas gift from the Wife

Echelon Comp with Holosun 507 and Streamlight TLR7-HLX. I love that the HLX is flush.

8 Comments
2024/12/01
14:30 UTC

3

Long shot but I’ll try.

Anybody have an OEM hellcat pro u-notch rear sight that they are not going to use? I got the gun gifted and the previous owner placed the rear sight and I would like the u-notch a little more. I couldn’t find hellcat sights on Springfield store only echelon.

I saw some on eBay but not sure if I can really trust it.

If someone is willing to help I would appreciate it greatly. Thanks in advance

0 Comments
2024/12/01
07:29 UTC

8

Another range day

Went to the range again. I feel like I'm slowly improving. Shot 120 rounds so now I have just over 200 rounds through my HCP.

5 Comments
2024/12/01
05:16 UTC

38

HC Pro..

13 Comments
2024/12/01
00:36 UTC

49

Picked this beauty up today

My first springfield but did months of research on this guy and almost got one when the FDE came out but held off while I did more research on some other new guns hitting the market. Decided to pull the trigger (no pun intended) before springfield's rebate went away. Can't wait to get to the range and break it in.

Next I just need recommendations on a TV screen for this guy. Looking at the EPS carry vs RCR..

3 Comments
2024/12/01
00:11 UTC

6

Mag Extension question for Springfield Hellcat Pro

Hey all, my Hellcat came with a 15rd magazine and I am looking to get an extended but had a couple questions.

I was eyeing the Hyve +3 extender, if I got that would I need to upgrade the spring in the mag also?

And is there a better brand than Hyve or are they as decent as they look?

Appreciate the pointers!

1 Comment
2024/11/30
22:57 UTC

5

Echelon COG ruined.

Long story short,

My cog is ruined and is inoperable, does anyone know if I could send it to Springfield to get fixed or pay to get a new one with the same serial? Pistols are registered in my state so I don't know what id do with the original if its broken.

6 Comments
2024/11/30
21:49 UTC

3

Hellion with a CMMG 22lr kit?

Curious if anyone has put a CMMG 22lr kit in their Hellion. I have the Hellion but thinking about picking up the CMMG kit while its on BlackFriday sale.

I know it fits in the Tavor x95 with minor modifications to the bolt, but has anyone tried with the Hellion? If so does it fit out of the box or with modifications to either the CMMG bolt or the firearm?

Thanks in advance!

0 Comments
2024/11/30
21:11 UTC

3

Hellcat finger

Yesterday was the first time I really got to rapid fire with my HCP and the left side my trigger finger is in pain. I'm not a fan of the initial trigger pull but once in rapid fire it really comes back to zero so well.

I probably shot 200 rounds and trying to figure out why my finger hurts. Could it be the tigger face combined with the initial heavy pull, esp compared to my Echelon? Or hand feeding those mags that look like they belong in a chef's knife collection?

I'm really loving the ergos and follow up shots. Can someone recommend a trigger system that will be more like my Echelon with the rolling break and less weight? It needs to perform better before I swap it out our from my 365 XL that is so much nicer on the first pull. And yes, I'm going to get a Maglula.

7 Comments
2024/11/30
20:31 UTC

1

I just picked up the XD Mod 3 and had a couple questions.

  1. I want to get an optic plate. The best deal I've seen was $25. Does anyone know of a better deal? And will any other plate fit or do I need one specific to the mod 3?

  2. Is there any word of an extended mag coming out? I know there is none right now, and 16 is a good size. I know there's a 10 as well, but bigger clips are always fun!

21 Comments
2024/11/30
08:39 UTC

57

Snagged an Echelon Comp today.

Must say, I’m pretty impressed with it so far. Green frame already ordered. Trying to stop myself from buying an Icarus frame right now.

6 Comments
2024/11/30
02:16 UTC

34

Joined the club for a stack today, already want a flat trigger shoe what other entry level upgrades should I look into?

11 Comments
2024/11/30
01:33 UTC

1

Mounting Plate Question

Hello,

Does anyone know which mounting plate number I need for an XD Mod.3 I would need for a crimson trace CTS-1525?

1 Comment
2024/11/30
01:22 UTC

7

Impact cnc machine plate failure

Shot about 400 rounds through my prodigy with the impact rmr plate. The 507comp came flying at me and I saw this. Sheared screws I was so sad lol. Didn’t shear the mounting screws just the optic screws. Tried slotting them in order to use a flathead but didn’t want to risk damaging/voiding warranty. Just going to pick up the agency plate as I should have at first. Everything was torqued to spec and had vibratite.

13 Comments
2024/11/29
22:24 UTC

10

Anyone use a Self indexing comp for HCAT Pro?

Does anyone have experience with the self indexing comp?

9 Comments
2024/11/29
21:46 UTC

3

Black Friday - 20% off CYA Supply Co. Holsters

Check out CYA Supply Co for holster options.

The Base model is the most affordable, Ridge is mid-tier, and the Path model has the best options: adjustable cant to angle the holster, adjustable claw and ride height to test out which combination is best for your body.

Really reduces printing. Very safe and your gun will snap into place out of the box.

I have been using these for five years. super comfortable to wear.

Vet owned made in San Antonio with pride.

If it doesn't work out for you, return for free.

0 Comments
2024/11/29
12:21 UTC

111

So good I want to buy another

21 Comments
2024/11/29
04:12 UTC

7

Xdm elite sight removal

I recently got a Xdm elite 10mm and I’m wanting to build it out. I’m wanting to get a red dot but first I wanted to get suppressor height sights. I’ve ordered some of SFA website. Any tips on how to remove them/ how difficult it’s gonna be? No shops near me has had experience with Xdm sights (It’s a pain in the ass I hear). Any tips?

7 Comments
2024/11/28
22:43 UTC

13

50rn mag

Ok all right who’s got one 😂

11 Comments
2024/11/28
19:41 UTC

3

Anyone know of any good deals for the 15 round Hellcat Pro magazines?

5 Comments
2024/11/28
19:11 UTC

11

Good price on new XDM Elites

I bought some magazines from them so I get their black Friday emails. Thought I would share in case anybody is looking to grow their collection. XDM Elite for $329.

https://palmettostatearmory.com/springfield-pistol-xdm-elite-defender-45acp-compact-osp-9rd-3-8-xdmed93845cbhcosp.html

7 Comments
2024/11/28
17:38 UTC

Back To Top