Hi!

I own an Sa23 bough 6 months ago. Recently I changed the nub for and omega nub and a maple leaf 50. In my second match the bbs are flying to the right and got some BBs stuck in the barrel. It looks like the bucking I’ve got is a little smaller in the entrance and the BBs get stuck there. I will change the bucking again to the original one to see if the issues are gone.

But I’ve got some money to burn and es thinking of buying a new hop up chamber for a ProWin one, a precision barrel and a new cilíndrelo head to get a better air seal.

Today I played with a novosibritch with a m110, the same as mine, and spread was minimal and range was far better with the same BBs.

How was your experience upgrading? Is it worth it? Or I should keep it as is and look to get a better replica later?

Hey everyone,

So I got a PRIME Daniel Defense MK18, and the Bluetooth is not detecting the gun. Is there anything wrong or am I supposed to press something on the gun whilst it’s searching for it?

Hello, Reddit users. I’ve been using the Specna Arms Daniel Defense SA-PA28 for a while now, and I’d like to share some observations for potential buyers.

Overall, the rifle is well-made out of the box, but I encountered an issue worth mentioning. The entire gearbox was filled with thermal grease, including the cylinder and piston. At one point, this caused the rifle to jam, and part of the piston broke off. Luckily, the rifle remained functional despite this.

The thermal grease in the cylinder and on the piston prevented smooth movement, leading to decompression issues. In my case, this resulted in power inconsistencies of up to 0.2J during different chronograph tests.
After carefully removing the grease from the piston and cylinder using silicone-based, everything is working perfectly. Using the factory spring, the rifle now chronos consistently between 1.68J and 1.69J.

Here are some photos from the gearbox. :)

https://preview.redd.it/3l82253mhn3e1.jpg?width=1600&format=pjpg&auto=webp&s=14f908b1114bbab837b103966af9fcd241355010

https://preview.redd.it/hki3c53mhn3e1.jpg?width=1600&format=pjpg&auto=webp&s=39043be04b476751a981725c842c8138cf7be7a3

https://preview.redd.it/2wxjx43mhn3e1.jpg?width=1600&format=pjpg&auto=webp&s=050a265f079775fc39175007a3cf5c0ae37625e9

Recently I needed to short stroke my gears to reduce power to prevent PME. This effectively under volumed my setup making the shot grouping bad. I installed a 285mm inner barrel instead of 370 to overcome this. I want to get a 10.5' barrel to match this length. I have an SA E09 edge 2.0. Does anyone have any good outer barrels they can recommend (I live in the UK and the specna arms 10.5 original parts outer barrel is out of stock everywhere). I don't mind splashing out a bit.

Specna arms m100 spring issues

Noob question, sorry in advance

I recently bought my first airsoft gun, a specna arms prime P20. When testing the gun with the m90 spring i get arround 0.8j with 0.25 bb’s. When changing to the default spring and m135 spring i get 1.5j and 1.8j respectivly with 0.25 bb’s.

As my local fields allow 1.2j i bought a specna arms m100 spring to try and boost the joules output compared to the m90 spring. However when i test the gun with the m100 spring i also get arround 0.8j with 0.25 bb’s. The m100 spring is also much more flexible compared to the m90 spring, however it is also a bit longer.

Am i doing something wrong? Should i try and test with an m110 spring? Different brand m100 spring? Or should i just accept the 0,8j with m90 spring (given that the gun shoots perfectly imo like that).

Any advice welcome! :)

Hi, I recently lost the rubber butt stock plate to my Specna Arms edge SA-E09. It has the M4 heavy stock.

I can’t seem to find any replacements online or places to buy just the plate: Any ideas or plates that would fit?

Looks like the image below:

Thanks!

Specna Arms SA H20

i recently got a SA-A04 replica secondhand and well, i cant take the stock tube out, i cant rotate, even with force i cant do anything, its like something is blocking it

Hi, new owner of a P-26 MK18. Anyone know what’s the rps typically using a 7.4v lipo? Getting around 14 with .25 bbs.

So i recently got a Specna Arms Flex FX10 (20RPS version). Wanted to change the hop rubber + inner barrel but in no way i can get these out. It looks really like its glued in. Why in the hell would they do this?

So i just put a blue maxx hop up unit on my specna and having feeding issues with it. Tried krytac, arcturus and pts midcaps none of them worked properly. You guys know which mags go well with this unit?

Hello everyone, I am in the market to buy my first airsoft gun and I was debating between the Specna Arms Edge 2.0 MK18 (https://www.evike.com/products/33358/) or the M4 version (https://www.evike.com/products/33363/). While the MK18 is a bit more expensive, it does look cooler imo. I was wondering, is the only difference that the external shells are different?

So im trying to tuine my specna to 1.5J, but to no avail.
factory springs with 0.28
M90 - 275
One inside - 375
M135 - 390

bought progressive ones:

M100 - 1.1-1.2 Joules 320
M110 as m100 same
M115 asa m100same

WTF do i have to buy so it works?

I noticed that all of these are longre +2cm than specna springs(non-progressive)

It’s a SA-E12 EDGE 2.0, bought it today for 280€ brand new in a store. Whatdo you think?

Hi, does the edge 2.0 orion geaebbox break if I use m140 spring? It seems to be a metal gearbox with metal gears so I'd guess not.

At the moment both of those are exactly the same price. Not a lot of information or reviews on YouTube, any help?

Has anyone got one/ used and can I get opinions on it please. Thanks gentlemen

I forgot what the taste of a new rifle is like, out of the box shooting lasers at about 80ft 😩

For real though, I need some advice here, I don’t like the lack of rail space here, any furniture suggestions so that I can start building this thing to my liking?

Can any tech recommend a bucking and nub for the new SA prime series. Will be using it at 350fps. Is the maple leaf macaron bucking and omega nub a good choice ?

With almost my last shots of the game fired the weekend I had a burning smell and my rif stopped firing. Tried a new battery and it doesn’t do anything now, where should I start?

Tried removing the barrel nut of my SA-E19 (MK-18) but it won't come off. Tried twisting in both directions and heating it but it won't even move when I apply an ungodly amount of force. Any advice? Is this thing even removable?

Sorry for noobish question. But, if set precock on Aster2 in SA Prime, will it release once i turn of battery, or set to safe? or how should i "finish" my shooting to not let spring loaded?

Hi, I'm trying to remove the handguard from my AEG. It's fastened using some sort of collar but I can neither remove the collar from the upper or the handguard from the collar. I've tried twisting (with a channel lock/pipe wrench) and pulling straight out with no luck. Nothing budges. Does anyone here have any ideas please?

https://ibb.co/8DkTScK
https://ibb.co/yyJX2qZ

My channel lock is scratching up the collar real bad. Is there a dedicated tool for removing that collar? It looks like it has 6 grooves around its circumference.

How much is it really going to hurt or how soon will internals wear out when running a 3s battery in a core or edge model rif?