/r/SigSauer
[The Everything Sig Sauer Sub]
Sig Sauer GmbH is the German representative of Switzerland-based manufacturing firm Swiss Arms AG. Their firearms are some of the most accurate and reliable weapons available, and are trusted by countless military and law enforcement agencies across the globe. This is intended as a forum for Sig Sauer owners (and non-owners) to share content and discuss all things Sig.
Lubricating Your SIG: http://grayguns.com/lubrication-of-sig-sauer-pistol-rails/
/r/SigSauer
Recently updated the Grip from Standard to Wilson Combat with the matching base.
Might go back to stock! But also want a bigger gun… unsure if I will keep this sig or just keep it for 🤩 practice or CCW…
When attaching new optic to gun, the right side was much tougher to screw into place using torque driver at 24 inch pounds as specced. Compared to left side which screwed in almost effortlessly. Anyone experience this when attaching optics to 365? I backed it out and back in a few times when felt resistance to ensure it was in right. Hoping it’s not cross threaded or anything.
After 6 years, finally added a light and optic.
Maybe a dumb question but ive got a telescoping/folding stock and ive noticed its got a bit of wobble if i rock it vertically. I assume this is normal based on how the lock is made but I cant really find any definitive answer. Stock is new, hinge was tight to fold but has broken in nicely, i flipped it to fild to the right (its on an ak) and so all the screws are tight.
Brownells rmr top window slide, 507 comp w/ dnc ranger wrap, Kagwerks raised and extended slide stop/release, gogun gas pedal, grey ghost precision slide parts, oem fcu and sig foxtrot 2
Watched a video the other day where a guy mounted his Juliet 4X with mbus pros but the big knob in the rear mbus pro interfered with the Juliet's Qd mount. His solution, which is stupid, was to flip the mount the other way.
Looking for some opinions. Would like to keep the Juliet as far back as possible fyi
Hey all!
Does anyone know if a Virtus BCG, bolt and barrel is compatible with a stripped legacy upper receiver? I’ve tried to research but not finding anything concrete. Thanks in advance!
Just picked up my M18 this week and added the m1811 today!
I have a P320 X full size and was thinking about suppressing it. I already own a 9mm can but would need to buy a threaded barrel and a nielson / piston. Question for anyone that’s done it is it worth it? Are there any issues I should know about? Will I need to change springs or anything else? Is the P320 a good suppressor host?
Just thinking out loud here...so any input is welcome.
I've carried with a 407k green dot for quite awhile and it's been great. Been thinking of switching up to the EPS Carry 6 MOA for the enclosed emitter, but weighing pros/cons of each. Obviously with the 407k you can get dust/dirt/lint etc but I don't typically carry IWB so that stuff has been minimal for me, and cleaning that stuff out doesn't take me too long. Here's my question with an EPS Carry...if, for whatever reason, the seals break and something does get inside the emitter, is the optic toast or can it be cleaned?
Just picked this up, very gently used. So excited to go test her out tomorrow. Previous owner added the R1P but left the short sights.
Think it matches my bulova perfectly 😀
Hi all. Can I buy the macro comp with manual safety or do I have to buy just the module with the safety? I’m having a hard time finding it.
Hello! Thanks for letting me join and thanks for looking!
Noah @ Real Street Tactical
I think I've read that the internal diameter of the handguard is 2". If that's the case, will a 1.8" suppressor fit ok or is that cutting it too close to the clearance of the handguard?
I have a CZ scorpion 3+ micro with a brace and some mags. Still new on my end, as well as his. I paid a little over $1000 for everything. I have a guy offering me a new old stock P226 Tacops from 2012. Everything from the factory comes with it. Looks to be in true mint condition shape for a safe queen gun. I asked if it was in a climate control environment and what not. All good there. Just curious if this is something I should move forward with. I love the gun and feel like it is a fair deal, but just get worried with it being 12 years old. I realize these guns last 40-50 years, that’s if stored properly. Let me know what you guys think. Thanks!
Hey guys!
I'm looking for some advice on the easiest / cheapest way to put together a P365 Spectre Comp slide / upper and a regular P365 frame / lower. (I own neither)
Option 1: purchase a regular P365 and then buy a Spectre Comp slide (and barrel? Or I think it's the same as the one in the regular P365?) and I believe I need the XL recoil spring.
Option 2: find and purchase a complete regular P365 frame / lower and a complete Spectre Comp slide / upper. Not sure if there's anything else I'd need to pick up if I pursued this avenue.
Option 3: something I hadn't considered?
I'm mainly concerned with availability / ease of sourcing what I need and obviously I'd like to do this in a cost efficient manner (while still having all parts be new).
Thanks for any help / direction! I'm looking to replace my main carry that's currently a Glock 43X.
Anyone have a set of the classic style grip panels they are wanting to part with?
I have been using this for about one week now in 6 mos. I will let you all know what I think of it soon!