|| || |UPC: |818004022962|

|Description: |IWI JRCO 9MM STL 4.4B 16RD OR|

|Brand: |IWI-US|

|Model: |Jericho 941 Full-Size Steel Frame Optics Ready

|Type: |Pistol: Semi-Auto|

|Caliber: |9MM|

|Finish: |Black|

|Action: |Double Action|

|Stock: |Black Plastic Grips|

|Sight: |Adjustable|

|Barrel Length: |4.4|

|Overall Length:   |8.20|

|Weight: |36.8oz|

|Capacity: |16+1|

|**# of Mags:** |2|

|Safety: |Manual Safety, Firing Pin Block|

|Receiver: |Black Steel Frame|

|Features: |Integrated Picatinny Rail; Cold Hammer Forged Barrel|

|MSRP: |$719.99

*edit to try and clean up formatting

Hi there I have newer IWI Jericho 941 with a rail and I’d to know if IMI jericho slides are interchangeable? Im looking to have mine milled for optic and want to keep my original slide stock

The original ones are expensive, so I've been getting used to the new ones with the rails.

I think I'd like to get a full size 4.4" barrel with decocker one instead of frame mounted safety, but it's a clusterf! Commander size 3.8" barrel labeled as full size, gunbroker pulling up details based on SKU like 'POLYMER FRAME' for ones that seem like the steel version I want, the only stock seeming to be dropshipping websites people complain about with guns taking months to arrive if at all, etc.

Should a 'J941R9' always be a full size, 4.4" barrel one with decocker? It seems like it, but if you google that, a lot of results will be ones with frame mounted safety or 3.8" barrel ones.

Anyone have a better way of finding one?

I've been searching for quite some time now and can't seem to find an imported model. Would love a full size single action 941f but can't find them anywhere. Any help would be greatly appreciated.

Anyone know where I can find an exploded diag for the slide decocker version? The manual available for download on the iwi.us page for the r9 is for an f9.

I'm looking to rustproof everything (crazy I know and not my first rustproof build) so I'm looking for stainless springs factory weight. Do these stainless springs exist? So far I've only found the very expensive DPM recoil spring.

Had one in 40 cal in the mid 2000's. Decided 40 cal wasn't for me and sold it. Recently decided I wanted one again. After a while looking finally came across another. This time in 9mm. Hopefully it's every bit as good as I remember.

New Jericho 941 RS9 picked up from palmetto!! Super excited !

She needs a name, any suggestions?

Trying to give em all names like surfs up https://youtu.be/ttUyfSYo2ig?si=GzvRmbWeEkBWhDC8

Has anyone with a 941R gotten an optics cut done? The safety seems to interfere here. Patriot says they have managed an RMSc cut once before but I'd like to see it before committing.

I have two Jericho 941R’s, both made by IWI. Top is imported by IWI USA as the Jericho 941 R with a cerakote finish. The bottom is a Jericho 941 R imported by Magnum research from 2012-2014/2015 under the name “Desert Eagle Pistol” with what looks like a parkerized finish.

Both are railed and have a polygonal barrel. The differences are the magnum research rail is thicker, says “Desert eagle pistol” on the side,the finish, the magnum research came with black IMI grips, and the spot between the beaver tail and the grips is fuller on the magnum research import.

Trying to decide on which one to keep because it seems redundant to have basically two of the exact same gun. What would you choose?

Sarco has some IMI Jericho FBL available. Looks like early first gen era. But sadly, they don't seem to offer to remove mags for capacity limit states, so I'm SOL. Thought others might be interested.

https://www.sarcoinc.com/imi-jericho-941-fbl/

For all you that got a threaded barrel - are the circular micro comps the only option that will fit without hitting the dust cover? Has anyone tested it out yet?

Hi I have Jericho 941R railed steel version, is there any suppressor height sights out there?

Just what it says.

https://palmettostatearmory.com/iwi-jericho-941-r9-9mm-4-4-16rd-blem-pistol-black-j941r9-blem.html

Polished Jericho 941F

I know I posted this yesterday, but I do actually want to try and find a lanyard loop for the newer 941. It may be better to see if I can get one on the mainspring retainer plug.

Does anybody know what the difference between a Desert Eagle Pistol and a Jericho 941FS is? I’ve tried consulting the all mighty Google and I can’t find anything out about them. As far as I can tell the only difference is the stamp and the recoil spring.

I think it looks pretty good with the contrast. Good Hand grips from Amazon.

She cycles and runs smooth no hiccups. Was just a direct drop in.

Ordered a silver SAR B6 threaded barrel for my 941F to match my black one on my silver wonder finish 941F SAO.

Just put 120 rounds through the new B6 stainless on my full size 941 R9 decocker with 2 piece slide. Worked fine, slow shots, rapid fire, got it real hot dumped a mag through it as fast as possible at the end, no issues except for a stove pipe on the sixth shot in the first mag. It does sit flush with the slide btw in case anyone cares.

Thanks to that reddit post i finally got er closer to the end goal.