Need some guidance, on 92 FS I replaced the trigger and trigger bar, hammer and added trigger conversion unit. all went well with install , everything was pretty much remove and replace. but 1st issue came with conversion unit the trigger was not returning unless I assisted it. I saw a few posts that's the trigger conversion reduced power was the most likely culprit so I order a second one but this time standard power instead of reduced. after takin out and replacing still facing same issue of trigger not returning in single action and also now DA , when I pull the hammer it sets up but will not release the trigger. to me it seems like a tension issue but everything seems to be in place correctly. Do I need to get more tension to the trigger? anyone have experience with the conversion kit? maybe that's my problem?

Follow on Instagram for more: @hoshobbyhouse

I’m looking to purchase a custom slide for my US Beretta 92FS pistol, specifically the ‘Samurai Edge’ style from Resident Evil, as shown in the image. I live outside the U.S. Please provide information on stores or vendors that offer this service with international shipping. Thank you!

Couldn’t pass this up

A couple of months back, people reported that Beretta was no longer manufacturing the base model 92X (Full Size, Centurion, or Compact). However, I've seen them on display in Bass Pro and Cabela's stores. They're finally listed online again for $550. (This is probably a clearance price. Beretta seems to dump excess inventory at Bass Pro / Cabela's.)

https://www.basspro.com/shop/en/beretta-92x-centurion-da-sa-semi-auto-pistol-9mm

https://preview.redd.it/edqa5uksbtyd1.jpg?width=260&format=pjpg&auto=webp&s=928085aafb690f6aa66b8a6b6fe164e24faad022

Paid a $ grand and think I got a pretty strong deal. Question - I installed a pro - lifter in my 1301 tac, and really like it. It looks like it also works on these A400s. Any successful installs out there?

Optic screw for Dlah plate was way too long for plate to not bottom out on slide.

I ordered a bunch of parts for my 92 brigadier

After installation, the trigger appears to work but when pulled in double action slowly, the hammer goes back and it does not break. Almost like it’s getting hung up.

But if let go and pulled quickly, the handgun works as normal, reset feels fine. If you pull it through double action quickly appears to work as normal.

Parts list is as follows

Volker precision trigger Langdon tactical skeletonized hammer Langdon tactical trigger bar Wilson combat mag guide Inox hammer pin Wilson combat hammer spring and recoil spring

Does the red dot mounting plate not come with the m9a4?

Plus. No sticker. I got one with my m9a3 .. wtf beretta lol

Any advice?

What’re everyone’s thoughts on the unissued new old stock APX gen 1 Brazilian surplus pistols being sold by AIM surplus? They have them for $300 with free shipping: https://aimsurplus.com/products/uniussed-leo-trade-in-brazilian-police-beretta-apx-9mm-handgun

I’ve seen a couple YouTube videos but want to get a wider range of people’s opinions. Only modern pistol I’ve had has been been a PX4 (I liked it but traded it for a Beretta production Type I Carcano/Arisaka).

I’m looking at this APX as a fun range toy.

Beretta didn't make it, so I did:

Flat trigger really helps. DAO pull is 5lb, 11oz.

https://preview.redd.it/mligtlrokqyd1.jpg?width=1300&format=pjpg&auto=webp&s=e0366a9ca81cfcbff3f6ddcc1f0810e129f55f65

Snagged it off palmetto for the Halloween sale. Need some recommendations for solid sling setups.

I have been looking for an OWB level 3 duty holster for a beretta 92A1. Would be without a weapon light.

I like the retention systems safariland has but i only found one holster that matches from their holster finder, 578-GLS Pro Fit.

Reading through various posts here, many have said that the 92a1 will fit the holsters for M9A3. Does anyone have experience purchasing one of the safariland holsters for the M9A3 and it fitting fine with the 92A1?

Thanks.

After NP3 coating all the internals on the 84bb, I finally got it to the range after some light polishing and trigger work. New favorite, hands down. The 90-Two here, my range toy, has a 7.5lbs double action pull and a 3lbs single action. Got the 84 down to 5.5/3lbs!

The 90-Two is a silly laser beam with all the crap bolted on - comp, thumb ledge, dot. The 84 with just a tiny fiber optic front and blacked out rear is fine for carry but I'm going to have to work with this one for a bit - with the direct blowback "pop" I found my sight picture was returning level but slightly right. Love these two so much!

I know they sell a F (safety-decocker) to G (decocker only) conversion kit for the 92/M9's.
I haven't found a G to F conversion kit... Does Berretta sell one? or do have to find somebody who went F->G and buy their removed F parts? Or is there something that makes this a F->G only process?
I like some of the features that are only available on G models... but I'd like to be able to convert it to an F.

I’m looking for a holster that’ll fit a Beretta M9A4 and a SIG P320 M17 that is sight cut, light bearing, and is open for a suppressor.

Anyone know if something like this exists?

Ok, I already have an M9A4 that has a ridiculous trigger, maybe the best in the business but I want to add a Wilson Combat 92 into the works. I am a fat fuck and I can hide anything so size don't matter. Should I get the Brigadier or the Centurion? I am leaning towards the Centurion because my M9A4 is already full size. But it's still a hard decision because I like both! Lol pic of my M9 and yea I put on the old school grip! Lol