/r/beatsbydre
A place to discuss the Beats by Dre product line.
Welcome.
This is a place to discuss the Beats by Dre product line.
Please feel free to ask for advice, technical support, or general talk about the different products that are produced by Beats.
This is NOT a place to sell Beats. Do not advertise personal sales on this forum.
This is not a place to promote music either. Please find a relevant subreddit.
Racist, sexist, or other inflammatory content is not permitted and will result in such content being removed. You may also receive a timed or permanent ban from the subreddit.
Trolling is against Reddiquette. We welcome all criticism and commentary on this subreddit, but obvious attempts to bait users will be subject to removal and potential bans from the subreddit.
For Beats 1 discussions, please visit /r/Beats1
We’re part of the Apple subreddit network!
Apple Subreddits
Mac Subreddits
iOS Subreddits
/r/beatsbydre
Tried fixing my Beats Studio pros after the headband snapped all the other 3 screws came out with ease but this one will not come out at all been looking online but no luck so far
Hi all! Need help. I just got a replacement Studio Beats bud because my dog chewed one of them. The case and the remaining bud were not involved. Everything was working fine before the bud got eaten. When the new bud arrived, I followed the instructions for unpairing, resetting, then repairing my beats; but when I hold the button inside the case, the light never starts blinking like it says it will, and a pairing graphic pops up on my phone saying "not your beats studio buds,” with a connect button at the bottom. When I press connect, the white light on the case temporarily lights up then goes out. I’ve tried do the reset thing where you hold the button for 15 seconds until you get a red and white flashing light on the case, but the red and white light never flashes. It just lights up the white light for a few seconds and then goes off. I found a video showing my exact problem and one reply giving a solution (see link below), but it’s kind of confusing. Following that advice, I was finally able to re-pair the case/original bud by removing the replacement bud from the case and then pairing. But I can’t get any further than that because the advice wasn’t clear on what to do after that to get the new bud to sync with the old one. In short, the pairing only works when I only have the original bud in the case. But it does the thing in the video when I try to pair it with the new bud in the case too. Can someone explain step by step how to do what ZACHisZAQ (it's in the post linked below) says to do? I don’t know what to do after I take the non-working bud out then hold the button. All that seems to do is pair my original working bud. Help!
Finally arrived :)
I’m delighted with my colour choice matte white looks stunning. They fit great on my fairly big head and I’m happy with their performance with my iPhone for daily use with medium volume.
I only have one big problem which can be a deal breaker to returning them.
With my Macbook I like to have a loud session with my YouTube playlist etc, i tried last night (all 3 connections: blutooth, 3.5mm jack and USB C) and on max volume they sound the same as my 1gen studio on approx 50%
Is there any way how I can make them louder?
I really want to keep them so hopefully there is some way to do that
If I always will be listen at full volume it will be no good for the battery.
During testing loud music Pro vs 1 gen I clearly enjoy old headphones more.
I just dug out my old wireless studios circa 2016(?) - they sound like they’re noise canceling but is there a way to toggle this on/off? Tried hitting power button x2 and also power button + left earcup button.
I've recently purchased brand new Beats Studio buds. However, the lid of the case seems to be slightly loose/wiggly and can be moved slightly side to side making a sort of rattling noise. Is this normal?
Is there a way to make it so if I’m only using one earbud, for the other to stop playing while in the case.
My beats keep conecting to my nephews phone. I did the full reset function pressing the power button and changing the name of it on my phone after a while it still connects to his phone. How do I stop this. Does resetting the beats prevent ild devices from connecting or no
Connected to my iPhone and it’s just ok volume wise, I can’t get them to be louder than what I’d call a 4 out of 10.
iPhone volume is all the way up
So I recently got Beats Solo 4 about 3 weeks ago and they’re already staticky. They go on and off and it’s really annoying and nothing seems to work whenever I try to fix it, I’ve reset the beats and even disconnected it from my devices. If there’s anything else I can do that would fix it please let me know
Anyone have any luck finding a charging station that can accommodate a Beats Fit Pro with wireless charging for iPhone? I surely can’t be the only person wanting this!
This is the a replacement and it’s the second time this has happened in a 8 month span . Last time they never recovered
Put headphones off one night at about 10% charge but when I put them on the next morning the light wasn’t turning on yet they still work perfectly fine. iPhone also shows that it’s supposedly fully charged. Is there a reason for this?
pretty happy with everything but these hurt my ears/give me a slight headache after wearing for an hour (consistently), anybody else feel this?
Do they vibrate, I heard my friends pair and i remember everyone saying they had no bass, they was thumping, I felt the sound, I js wanted to know because the bass is balanced but punchy, are others like that
Whenever I switch my earbuds to Transparent or Noise Canceling, there's this fast clicking noise in the left earbud that doesn't stop until I switch to the regular mode. How do I fix this?
I got these(speakers)in 2019 after heavy use it finally fucked the battery in 2024.I used this as mini soundbar as well with my projector and monitor.Now i switched to my sister’s she doesnt use it much so its basically brand new. The fit pros also amazing buds version of the speakers imo. Sound profile of the speakers powerful lows with good mids and has two tweeters for treble. The buds are very balanced for every genre of music balanced lows with clears mids (i like mids alot) and highs are not over powering a beautiful package. Overall,the secure fit amazing anc jst elevates the music and it has nice transparency mode too so u dont get mugged XD
I bought my Beats Studio Pro a few weeks ago at Best Buy. At the time I heard I could redeem 3 months of Apple Music - new and returning subscribers. However, I still haven't found a way to activate them. Does anybody know how to do so or have the same problem?????
thanks in advance
My Beats Pill has a weird glitch when I power it down it doesn't disconnect I have to tell it to manually disconnect from my iPhone and before you ask no I don't have the latest firmware I've been trying to get it but of course Apple only updates the firmware at the most inconvenient times and it's impossible to get Apple to update it I've done a factory reset and a disconnect from the speaker itself I strongly suspect it will resolve itself when I update from 2C289 to 2C336 but I'm not having any luck with the automatic update
The left one can NOT stop buzzing even when not connected to anything and off noise canceling, and before u comment i cant return them because they were a work gift. What should i do?
I got my beat solo 4s but I was told that they're not really good. The thing is I opened the plastic wrapping around the beats. They're not fully opened but the tear apart line has been torn almost halfway, can I still return these to apple or will they say it's been considered used? Honestly Ive had beats solos before and their earmuff sizes are tiny that they start hurting my ears?
They needed some love and reassurance but were still going strong , yes both ears work.
I have Beats Solo 3 headphones right now, but I'd like to know if Beats Studio Buds Plus sounds better?? I also want noise cancellation.