My kit kinda narrowed my choices to either of these 2 lmgs. I will state I would like a PKM with a handguard already on it if possible. RPK wise I would prefer Cyma or LCT.

Timestamp: https://imgur.com/a/KSDMbgS

Hey, looking to sell my fully functional VFC Noveske N4

It’s in pretty good condition although it does have a scratch here and there.

Comes with

No mag

VFC/A-Plus Noveske N4 GBBR

RGW Sandman-S suppressor repro

Magpul SL-K Stock

Magpul MOE K2 Grip

RS selector detent spring

Comes as shown.

Asking 510$ shipped or 480$ local pick up only.

No trades.

[PRICE DROP]

Timestamp: https://imgur.com/a/HAiDw1D

Hey, looking to sell my good condition vfc kac sr16. Selling because I have enough VFC ARs.

Includes

RS BCM grip with a RS selector detent spring

V3 Vmag

V3 Black stanag

V3 Stanag

Comes as shown.

610$ shipped or 580$ local pick up.

No trades.

VFC Gen 1 MPX AEG

Only looking to sell, unfortunately not looking for trades

https://imgur.com/a/AhNhZuR

For sale here is my VFC Sig MPX setup (this is the full metal version, the highest end AEG mpx that’s available). I had this professionally built and tuned. Everything you need for it is here. Outfitted with a Gen 1 handguard, trilug muzzle and and Omega 9k suppressor w/trilug adapter, I built this because I wanted the most reliable subgun in Airsoft. Most Airsoft subguns are strictly for indoors since their range is limited. However, this MPX was built to perform both indoors and outdoors. Was able to make hits out to 80 yards (as far as I could test) with .30g bb’s.

$650 $550 + ship OBO

Parts list: $1169

Externals

• $450 VFC MPX AEG
• $180 6x extra VFC Midcaps (7 total)
• $80 VFC MCX Retractable Stock
• $25 Pro&t trilug muzzle
• $15 MPX Gas block battery stopper
• $85 Omega 9k Suppressor
• $125 Gen 1 Sig MPX Handguard
• $20 Gen 1 Handstop

Internals

• Perfectly shimmed, sorbo’d, AOE corrected
• $42 KWA High Torque Motor
• $73 Gate Aster MOSFET V2
• $12 Lonex Cylinder Head, sorbo’d
• $20 CYMA platinum rotary hopup
• $15 Tru hop bucking
• $27 GATE Quantum Flat Trigger

(Suppressor included. However laser, optic, and light not included)

Payment via PayPal

Hey I'm selling off a few guns I just don't use anymore and are taking up space, I use PirateShip and will ship CONUS from NorthEast Ohio. I'm accepting trades too! Details down below. I am open to offers and will go lower if need be, I need the money soon! I will take PayPal G&S or Zelle, through G&S I'd prefer the fee taken off by PayPal to be covered.

Pics of the lot: https://imgur.com/a/B3ZeOGC the time stamp has been updated, others have not.
G&G AK-5C. In decent shape but is missing the bolt release button and has very mild corrosion on steel parts. It's been wired to deans, I can include a battery box if needed because of how limited the battery compartment size is. $300+shipping or best offer.

Marushin M2 Carbine. In good condition, all real wood furniture, some parts are slightly loose and the magazine and some other parts have a grey oxidization but doesn't affect performance. Comes with a CO2 magazine and internals should be reinforced for CO2 usage. Compatible with King Arms M1/2 magazines. $225+shipping or best offer.

Five G&G polymer midcaps. They simply do not work well and some are missing the followers that go into the hop unit. $10 flat plus shipping.

I am interested in GBBRs for trade, primarily VFC of just about any type. Open to other brands but not a fan of WE or KWA unless it's the Vector. I'm also very interested in getting a G&G LR-300 if possible, will not accept the A&K. I may consider a full length G36 or possibly XM8 in trade too. I'd also be interested in an A&K or LCT PK/PKM/PKP, just hit me up with what you have. Thanks for reading!

https://imgur.com/a/airsoft-sell-images-kob7Biq <------ Images of what I'm selling

If Trade you ship first, my only condition, only trade for GBBRs unless its a trade for multiple items ill consider AEG if its an ICS Galil, or Certain LMGs

======================================================================== Real steel GHK AR-15 build with RS QD barrel system and RS Folding stock adapter with various other parts and internal upgrades

DM for more details and full list in the build! There's alot more to it.

Rough idea of what it is:

Pantheon Arms Dolos system:

Full system with all parts

x4 Dolos RS Handguards

2 Yankee Hill Machine Co. 4"and 12" (YHM) Toob handguards and x2Pantheon Arms MLOK Handguards.

LAW Tac Adapter, I believe Gen 3?

Comes with a Magpul Pistol grip (and Magpul grip) and Magpul CTR Stock and complete GHK Buffer tube and BCG extension.

Dolos set Will come with a 4" Steel SBR Samoon GHK Outer barrel and mock gas tube system

And 9 Ball Stainless steel 6.00mm 105-120ish mm

Modified PDI W Hold VSR10 Spec Bucking

Also has a GBBR Spec HopUnit

NPAS RATech Nozzle

Gun also has a Samoon ambi charging handle and anti walk pins

Receiver: Samoon spikes tactical safe space lower

Spare bits also include:

GHK 12.5" Steel outer barrel setup with inner and hopunit and barrel nut for free float

RATech Steel flat trigger RAtech Steel extended bolt release tab Ambi fire Selector

Asking around 850 OBO

========================================================================

Modify PP2K, Completely Stock,

Comes with its original hard foam case.

x1 Shorty Magazine

x1 Extended CO2 Magazine

and a spare BCG + Charging handle set

asking 275$

=====================================================================

JagArms Super SERBU Shorty Shotgun

HPA Tapped, has a minor leak within the shotgun

Has worn paint upon the pump, but the main body finish was stripped.

Comes with a little Pouch and x5 TM Style Tri shot shotgun shells

DISCLAIMER: I dont yet have a line for my HPA Setup so I cannot test to ensure its 100% in working order, though I am planning on getting these things done)

I'd like 130$ as is

=======================================================================

Metal kitted Tokyo Marui Desert Warrior 4.3 1911
Spring Field armory build

Comes with Original box

x3 MEU TM Magazines

DM for more details on parts/build

Guarder/Nova/SD kitted and various other parts/upgrades.

Got it and wound up finding a different 1911.

asking 400$ (MSRP of around 853 for the build)(over 50% off)

=======================================================================

all Steel GHK/Umarex Glock 17 Gen.3

x1 Green Gas mag

x2 CO2 Mags (one Mag needs a follower)
Brand new GHK Samoon Glock CO2 Kit

Laylax/Poseidon Ice Pic nozzle rocket valve

Steel slide
Steel interlas
Steel Outerbarrel
Steel recoil rod

Asking 375 for the bundle,

(Only thing im willing to split and sell on its own is the CO2 Kit/Mags from the main Glock)

=======================================================================

WE L85 Replacement carry handle + Spare parts

Asking 45$

=======================================================================

x2 WE STANAG Mags (No leaks or damage)

WE AR spare parts Trigger box

Foward assist + Mag button release

75$ for the bundle

========================================================================

WE Tech OEM M14/EBR Fire control group/trigger Box

Good condition and unused, I don't need it as I have a RATech, so this could be used as a spare for your own!
(These can be modified to last way longer and be durable, check HRCs EBR Channel)

Would like 35$

========================================================================

========================================================================

Tokyo Marui OEM Colt Series 70
Frame and Slide

OEM Grips

OEM Outer barrel

Spare bits/parts

Purpose is to either replace your cracked/broken parts or change the overall look of your 1911

Would like 30$

========================================================================

Spare GHK AK Parts:

OEM 74u Length and AKM length Inner Barrels

Spare OEM HopUnit Parts

OEM 74u Alum outer barrel

OEM Alum BCG

Would like 30$ for all parts.

========================================================================

VFC/APFG 4/5" MCX Rattler Handguard and MCX Rattler Pistol grip

would like 50$

=====================================================================

Buyer pays fees and shipping via PayPal Goods and Services!

or F&F if you wish to skip the fee.

Feel free to PM for more information.

I don't drive so shipping times can vary, please bare with me!

https://imgur.com/a/0se8mai

I’m selling a brand new EMG Troy Industries Licensed SOCC M4 Carbine M-LOK AEG Rifle. This gun is brand new as of November 1st, 2024 and only fired once to make sure it works and that’s about it. It’s lipo ready and has an insane rate of fire. The gun won’t come with any of the attachments or batteries, however they will include all of the default parts it came with (magazine, iron sights). I’ll also throw in the M-LOK foregrip for free (originally $20). If you have any questions or need more pictures/videos, please reach out to me! Thanks.

https://www.evike.com/products/101505 - EMG Troy Industries Licensed SOCC M4 Carbine M-LOK AEG Rifle (Model: 10" RIS / Black) $355 on Evike. Selling for $180 plus shipping ($35)

Selling a used Tokyo Marui 1911 gbb bought second hand. Still in working order with the usual wear for its age, and it still is mostly stock except for the magpul grip. No cracks seen on the gbb. Comes with 3 functional nonleaking mags and a owb paddle holster. Selling for $120 shipping included on paypal g&s. No trades. 

https://imgur.com/a/2r7D34y

Photos:

Imgur Album with All Photos

Item 1: Classic Army ECS PXG 9 AEG Airsoft SMG [Black] – Gun/Accessories/Batteries/Charger

Price: $245 (OBO)

What’s included:

• Classic Army ECS PXG 9 AEG Airsoft SMG [Black]
• Auto drum magazine (1,200 rds) (no battery included)
• 3 stick magazines (120 rds each)
• QD Fast Detach Suppressor
• NcSTAR red dot sight (battery included) + red dot protector
• Two 7.4V 1,000mAh 20C LiPo stick batteries + charger

Condition:

• Last used approximately 5 years ago and has not been tested since.
• Fully functional during its last use and stored in a safe, dry environment.
• Minor cosmetic wear from normal use; no significant damage.

Item 2: KJW Full Metal M1911 Tactical GBB Airsoft Gun [OD]

Price: $70 (OBO)

What’s included:

• KJW Full Metal M1911 Tactical GBB Airsoft Gun [OD]

Condition:

• Last used approximately 5 years ago and has not been tested due to lack of a magazine.
• Believed to be functional during its last use and stored in a safe, dry environment.
• Missing front sight.
• No magazine included.
• Minor cosmetic wear; no known internal issues at last use.

Bundle Price for Both Items: $300 (Firm)

Shipping:

• Located in California (CA); airsoft guns will be shipped with orange tape (not shown in pictures).
• Buyer pays shipping. Items will be securely packaged to ensure safe arrival.

Payment:

• PayPal Goods & Services only.

Additional Notes:

• Feel free to DM with questions or requests for additional photos.
• Open to offers on individual items, but the bundle price is firm and provides the best deal.
• Must be 18+ to purchase.

Disclaimer:

Please note: Due to local restrictions, I have not tested these items recently. They were functional during their last use but are sold as-is.

Hey all, looking for a hicapa to mess around with. Will take something old and tired/bone stock. Looking to spend around $150 or less shipped.

Used condition. Comes with battery, one hi cap mag and two standard mags. Battery charger not included

Pics: https://imgur.com/a/SlbunHc

Price: $120

Local/pick up only - Los Angeles

Of the 74 variety looking for all kinds of stuff

TM spec :)

Good condition besides slight rust on rear takedown pin, comes with 11.1v Titan battery shown in picture

SoCal Area

Asking for $350 OBO
PM for details/inquiry

Images : https://imgur.com/a/S5FsPeW

(TimeStamp) https://imgur.com/a/2oIhSES

All prices are OBO and are priced from recent AM sales. I can split shipping depending on location. Will consider all trades, mainly looking for HPAs or gbb.

Willing to negotiate on prices and bundle deals

Krytac Vector AEG $500

ASG 40K motor, Max CNC double o ring piston head, bolt ported piston, and an Angry Gun Suppressor with an Acetech AT2000R tracer. Kriss USA QD sling on the body. I have 4 mags, the tracer, and the original muzzle device. When i did buy this it didn't come with the original flip up sights but ive installed replica Magpull ones.

KWA MP7 GBB $180

Shows some wear on body and mags. Stronger spring installed, ive only plinked an larped with this. CQB spring included, as oem hammer sping. Currently shoots down and to the right and presume its the bucking is worn out. Comes with two mags that i will relube and clean before sale. Missing upper receiver pin, but because of this the body has not cracked. Will include CQB spring, hammer spring, two mags and i can install replica magpull sights as well.

EMG STI TTI Hi Capa $85

No Mag included, but shoots and functions very well.

Tokyo Marui 4.3/5.1 HiCapa $380

(Silver setup) GunSmithBros LimCat Protector slide, AIP trigger, AIP trigger bar, CowCow sear, AIP guide rod, AM guide plug, Maple Leaf hop up with a 70 degree bucking, 150% recoil spring and a 150% nozzle spring. (Black Setup) OEM TM slide, threaded AM Steel barrel. Will include all OEM parts, and one mag.

Colt CQB M4 AEG( Starter Bundle) $50

Battery cable is external into the pouch on the stock. Has a lower fps spring for indoor but i have the OEM one to go with it Will include 2 mags, 1 nun chuck 9.6 battery and a charger.

3.8 TM 1911 (Boneyard) $30

Only frame, slide, grips, bbu, sights, barrel and guide plug.

BBM red Grip 15 BBM Grip Tapes $5ea EMG Red Dot Mount $20 UTG Weapon light $30 Lylax 5.1 Rainbow Fluted barrel $40

Firstly PROOF PICTURE

There are a large amount of parts available in this post, mostly/entirely v2/v3 gearbox compatible for most internal components.

Some “ground rules” to start;

I will be offering included shipping for as much of this stuff as I can. I have been saving up boxes and shipping materials to do so, but there is a limit to how much I have, I may be able to scrounge up enough to get through the entirety of sales, but this plays into the next points.

I will provide discounts for combo buys, i.e. gears/piston/compression set/barrel/whatever, as I see fit/negotiated till everyone is happy.

I have provided heavy discounts on top of the already cut prices for bulk purchases, i.e. you buy all of the barrels/parts box/motors/etc, this discount price will be listed on the bottom of each group of parts.

Essentially, the more you buy, the more I will cut from the price.

DISCLAIMER; There is wear and tear on some of these parts, the distinct damage has been pointed out as I have considered significant.

I will provide extra photos if you feel the need to ask for more specific images.

NOW FOR THE PARTS BEING SOLD

—---------------------------------------------------

GEARBOXES

I was unable to test these gearboxes for function, I do not have a standard V2 platform on hand, there is nothing functionally wrong with any of the gearboxes.

Retro Arms Gearbox - Asking $135

• 9 mm Bearings
• Full Cylinder Assembly
• SHS Piston w/ Aluminum Maxx Head
• 16:1 Custom Set; SHS Sector, UFC Spur, Lonex Helical Bevel

Krytac Gearbox - Asking $55

• Stock internals
• SHS Piston w/ Aluminum Maxx Head

UA Aim Top Upgrade Gearbox - Asking $60

• Aim Top Lightened Red Piston w/ Stock Piston head
• Ball Bearing Spring Guide
• Aluminum O-Ring Nozzle
• Aluminum Dual O-Ring Cylinder Head
• Full Cylinder
• SHS 200:100 Helical Gear Set
• Ball Bearings
• Missing motor connector
• Appears to be built for DMR purpose, cannot tell what spring is currently in the box

SRC Gearbox - Asking $35

• O-Ring Nozzle
• Aluminum Dual O-Ring Cylinder Head
• Stock Parts
• Plastic bushings - should be replaced

ZCI Complete Upgrade Gearbox SHELL - Asking $35

• Bushings
• QD Spring Guide

If you want any of these gearboxes shimmed, parts swapped out, completed to a fair running standard, let me know and we can work something out.

—---------------------------------------------------

MOSFET

Gate Pico AAB - Brand New In Box - Asking $21

—---------------------------------------------------

MAIN SPRINGS

All of these are brand new in box

The PILE

ASG M115 - Asking $6

ASG M135 - Asking $6

~~ASG M125 - Asking $6

SYSTEMA M130 - Asking $6

EVIKE M130 - Asking $6

EVIKE M140 - Asking $6

ROCKET M160 - Asking $6

ROCKET M130 - Asking $6

BULK - $24

—---------------------------------------------------

MOTORS

The PILE

Chihai Neo Motor - Asking $20

• Probably higher TPA

Echo 1 Blue Neo Motor - Asking $20

Echo 1 Blue Neo Motor - Asking $20

Krytac Stock 30k Neo Motor - Asking $20

Krytac Stock 30k Neo Motor - Asking $20

SHS High Torque Neo Motor - Asking $25

• Pinion not included, needed it for a personal build
• 16 TPA

AMP T5000L High Torque Neo Motor - Asking $25

• Pinion pretty beat up
• 16 TPA

Evike Monster Torque Up Neo Motor - Asking $25

• 16 TPA

ASG U Boost 30k Neo Motor - Asking $35

BULK - $80

—---------------------------------------------------

BARRELS

Disclaimer; There are a good set of barrels here labeled as UNKNOWN brand and have an “ish” after the diameter, there are no discerning brand or dimension labels on these barrels, I measured them with a measuring tape for length, and used a hand caliper for the inner diameter. A digital hand caliper is NOT the tool to measure inside diameters, especially not diameters in this range, I measured off of “front” of the barrel in the hop window so take the diameter with a grain of salt.

The PILE

Action Army 510 mm 6.03 - Asking $30

Angel Custom 550 mm 6.01 - Asking $30

Unknown Brand 510 mm 6.03 ish - Asking $20

Unicorn 510 mm 6.06 ish - Asking $30

Lambda 460mm 6.05 - Asking $35

Lambda 510 mm 6.05 - Asking $35

Lambda 470 mm 6.03 - Asking $30

Lambda 470 mm 6.03 - Asking $30

Madbull Ultimate 247 mm 6.01 - Asking $30

Unknown Brand 510 mm 6.03 ish - Asking $20

Unknown Brand 510 mm 6.03 ish - Asking $20

Unknown Brand 390 mm 6.05 ish - Asking $20

Maple Leaf Crazy Jet Brass 415 mm - Asking $40

Maple Leaf Crazy Jet Steel 370 mm - Asking $40

Maple Leaf Crazy Jet Steel 312 mm - Asking $35

Poseidon 407 mm 6.03 - Asking $40

ZCI OEM 407 mm 6.02 - Asking $20

ZCI OEM 433 mm 6.02 - Asking $20

Unknown Brand 160 mm 6.03 ish - Asking $15

Angel Custom CUT TO 390 MM 6.03 - Asking $20

BULK - $404

—---------------------------------------------------

PARTS BOX

The PILE

SHS Bore Up Kit Mushroom Piston Head - Asking $15

• Cylinder in Packaging, all parts very new, no signs of use

Full Cylinder Assembly - Asking $8

• Aluminum Cylinder Head

AOLS One Piece Cylinder Kit V2 - Asking $10

Dual O-Ring Cylinder Head - Asking $8

* Good Condition

Steel Full Cylinder - Asking $5

5 metal tooth Poly Piston - Asking $6

• Very good condition

Aluminum Piston Assembly - Asking $15

• Heavyweight, aluminum head

Piston Assembly - Asking $15

• Aluminum head, half rack

Piston Assembly - Asking $12

• Maxx aluminum head, half rack, missing front o-ring

Aim Top Lightened Red Piston - Asking $8

• Lightly Used

SHS Gear Set - Asking $15

• 32:1

SHS Gear Set - Asking $15

• 18:1

SHS Gear Set - Asking $15

* 13:1

ZCI Gear Set - Asking $16

• 18:1 w/ Delayer

ICS Gear Set - Asking $10

• 18:1 w/ Pinion

ZCI OEM AK Selector Plate - Asking $3

• Brand New Out of Box

V2 Tappet Plate - Asking $3

V3 Tappet Plate - Asking $3

ZCI OEM AK Short Nozzle - Asking $3

• Brand New Out of Box

Assortment of Bearings - Asking $6

• 6 8mm bearings, 4 7mm bearings, 2 random bushings

Gate Quantum Trigger - Asking $10

* 1B1

Maxx Advanced Speed Trigger - Asking $10

* Style E

Maxx Advanced Speed Trigger - Asking $10

• Style E

EMG Flat Trigger - Asking $10

Anti Reversal Latch - Asking $2

Thicc Anti Reversal Latch - Asking $2

ZCI OEM Anti Reversal Latch - Asking $2

Random Assortment of Springs - Asking $19

BULK - $152

—---------------------------------------------------

If you'd like to be a mad lad and purchase the entire lot, the discount is about 40% off the individual part prices coming to $850.

Alongside the parts, if you would like bits exchanged, put into any of the gearboxes, shimmed or otherwise put together, I can do that. I have a certain number of shims and no AOE correction bits, if anything becomes criminally annoying to combine (needing dremel work, annoying shimming results) I may add a small charge, but again any combos will be discounted on top of the lowered prices.

Feel free to comment

I’m looking to buy an Angry Gun QD Mock Silencer for MP9 Series Airsoft GBB Tracer or tightbore barrel extension. Send me your asking price and thank you in advance!

Item I’m looking for - https://www.evike.com/products/28649/

Pics: https://imgur.com/a/ZMaVYQQ

Selling my Tokyo Marui HK417:

Pictures are of the actual rifle in question and ARE NOT stock photos. Please use these as a tool to ascertain the HK417’s condition.

This rifle has the full HK trademarks and will ship immediately from CONUS the day after payment is received.

I also have additional mags for sale if interested. Eotech not included.

This HK417 is in excellent condition besides the small crack on the buttstock and the missing latch on the charging handle

Thanks for looking! Please feel free to PM any questions you may have. Selling for $645

Haven't played in 2+ years, got a new position at work and the field times are atrocious for me. I played less than a handful of times and its been sitting in my closet since.

I'm not going to pretend to know what I'm talking about, because my hyper obsession with this hobby came and went, nor am I going to say I'm the best on gauging pricing. Just PM about it homies; I just need the shit gone and out of my closet and some extra cash for Vegas. Will try to get stuff out before Christmas but...you know. Trying to get rid of things in bulk though, so.
Check flair on here and GAFS.

Timestamp

GHK Plummy AK Lot

Album 1
Album 2

Heph Fire Group, W&S Full Travel Rod & Hammer, TDI Lower, Plum Upper, Smokies Leather Wraps,, BCM MLOK Vert Grip, Dyed Magpul Angled Grip, Hephaestus Steel Barrel, BowMaster Hop Unit & Chamber, Quiche TDC PDI W Hold & Mag tool, Quiche Fast Loaders for 74 and AKM, Lambda Smart .03, Repro Eotech XPS2 and Magnifier, Repro PEQ (works, just needs batteries), Extended Charging Handle (not installed) and Real Steel Fire selector with bolt hold open and ledge, 12 (!) Mags (some plum, some not, 1 AKM) and a shit load of maintenance mats for mags, as well as some general maintenance lube stuff, AceTech BT1000, Ra-Tech Adjustable Nozzle and Tool and unopened TNT .410 barrel.

Sling not going with it, sorry! $1600 Shipped? Idfk it's not a damn Arsenal. OBO

AEG LCT AK, CYMA AK74U Workhorse & MP5 Project

I don't really know what to say about this set honestly, some midcaps, some high caps, MP5 works but isn't accurate, I was going to rip it apart and do some HPA witchcraft to it but lost interest. the 74u has SOMETHING done to it internally and was pretty surprising to me honestly when fielded. Never got to use the LCT. Brand new railed dust cover for the 74u, midwest industries repro side mount for the LCT. Fixed or adjustable stock for the MP5.

$425 shipped OBO for the lot.

ESS with BrainExploder Mouth Protection, 2 NB Tactical Balaclava Ghost Face Shields, 2 Neck Gaiters with Mouth Guards, Smith Optics Fan Goggles (?)

I tried a bunch of shit out to stop fogging. Turns out you just need cat piss or something. $125 shipped

Taco Taco Pouch Lot

2 Individual HSG Tacos, 1 Double Triple Decker HSG Taco AR Mag Pouch, 1 double repro taco mag pouch, 2 individual repro taco mag pouches. some shitty amazon belt. $125 shipped OBO

Custom HiCapa

That's CAP

A plethora of different upgrades, Waldo Customs, Airsoft Masterpiece, AW Custom, CowCow, LA Capa, springs on springs on springs, power regulator, skele parts, gold barrel with threaded adapter, extended magwell, release, thumb safety, just about literally everything replaced. Have all original parts too. 10 mags AceTech Lighter BT, Acetech Brighter C, Vortex Viper Optic. Surefire X300 (busted, needs screw)

$475 shipped OBO

Sig M17

Supressor Sights, Sig Air Optic, Safariland holster. I don't know where the original sights are, will need those to fit in the safariland or dremel time baby. 2 mags.

$300 shipped. OBO

GoPro 8 & Helmet

GoPro 8 Black, ACH Helmet with Brain Exploder Mount, 4 GoPro batteries & Charger, 2 SD Cards. ARC Adapter Mount, battery Pouch, SOS Device

$275 Shipped OBO

Chat to haggle or ask questions, not interested in trades as I'm out and trying to stay out.

Album

1. TWI Kochevnik bullpup kit - $400

Recently purchased from a user on Heavy Recoil Club. This is a catch and release as I personally wasn't satisfied with the feeling of a bullpup, however I can verify it's fully functional. This isn't the complete TWI kit as the top rail seems to be an LCT ZB-31, some set/rail screws are missing (with no hit to functionality, can also be replaced), the trigger bar stabilizer missing which means the bar must be straight within the gun to not block the magazine and might need slight tweaking, and the grip is something I don't recognize. There is gouging on the bottom rail and some drilling along the lightning cuts to fit the screws for the top rail, alongside the extra included gas tube which has been filed to seat the top rail correctly. Asking price is $400 shipped, fees paid by me.

2. Hephaestus 10.5 inch M-Lok handguard + Type III railed gas tube and hardware - $80

Good condition, low wear. All original parts included and recently tested. Can fit on a TM Saiga with slight modification or an LCT without modification. Asking $80 shipped, fees paid by me.

3. GHK AK74MN barrel kit - $100

Everything you need to convert from a carbine configuration such as an AK105 to a full-length AK74MN. All are stock GHK parts, including unjamming rod, zinc barrel (decently scratched but still looks good), front sight, gas block, flash hider (with adapter and locking nub), and all securing hardware. Not sure if the included screw will work but it honestly really doesn't matter. Asking price is $100 shipped, fees paid by me.

4. Extra goodies, buyer pays shipping

• W&S rapid fire kit for GHK AK - $15
• Hephaestus Tactical AK magazie catch for GHK/LCT/TM - $10

Payment through PayPal G&S, postage purchased through Pirate Ship, and please comment before DMing. Thank you!

Images

Matrix RPG w/ Co2 Taginn Round- Shoots well. Very self explanatory. Comes with real sling. Has minor paint blemishes/scratches from use. This is the real wood version. SOLD

KWA Kriss Vector- This has been discontinued for many years now. It shoots well. Fast rate of fire. All fire modes work well (semi, burst, and auto). Comes with 8 green gas mags. All of them hold gas. Some are missing the base plates and sleeves. This does not affect functionality. Replacements can be found at black variable for just a few dollars a piece. Mags are pretty hard to find nowadays. Small scratches on body from light use. Bolt in bottom of hinge is missing ($600)

Special Purpose Shotgun w/ keymod- Holds gas. Comes with 6 shells. Shoots well. Has big scratch on right side of receiver but doesn’t affect functionality. ($175)

GHK Glock 17 Steel Upgraded- Enhanced co2 upgrade kit, 2 co2 magazines, cracked light, maple leap hopup and barrel, rmr adapter. Both the barrel and slide are steel. Good condition. Heavy kick. Comes with holster as well. SOLD

Shipping is free because I’m for the homies. If you have any questions feel free to ask.

https://imgur.com/a/7bRpZLc

Just sent it out and received it today from a inspection to confirm and replace parts so it’s completely fresh and His warranty is also refreshed (1 year) if anything breaks

Build list is pictured only thing not included is my g&p dbal, and eotech combo

Not listed but it will come with the super rare upgraded recoil system from Korea (currently installed)

stock recoil system is included of course

Note with the upgraded recoil kit if you use the stock linear spring fps is 500💀 has multiple springs (a 1.1j,1.4,and a 1.8j)

Looking for $800 buyer pays shipping

Well bought part of an stg44, and now I need parts. Like the stock and lower and the shell side with the charging handle. Would also love mags, hit me up with what you got and I'll work with you

Local Richmond Tx

Images: https://imgur.com/a/HFUzWXJ

Moving away from the hobby so I'm letting go. Everything is OBO and before shipping. Willing to negotiate on bundle purchases

$250 VFC G17- Only fielded once. Comes with a fiber optic front sight, light, one extended mags and 4 standard mags. Original sights are also included.

$300 Hi-Capa-

Parts list:

-nineball trigger -nineball 6.00 inner barrel -la customs short stroke -la customs 4.7 plug -%140 nozzle return spring -%130 recoil spring -threaded metal WE outer barrel

Comes with 4 total mags, brighter-c tracer, and feyachi 1000 lumen light. Shoots like a dream.

$120 Cybergun P90- Comes with an extra mag and lipo battery.

$50 UUQ Red Dot- comes with an extra battery, rmr/rail plates.

Let me know if you have any questions :)

Looking for spare gearboxes, motors, gears that don’t exist anymore etc for Tokyo Marui PSG1 aeg v4 PayPal ready

https://imgur.com/a/E45j3FD

Wtb Maruyama pro Glock or pistol variant

Preferred local pickup, but can ship too.

Lots of images and close ups can be found here: https://imgur.com/a/FLNvlVE

If you would like to see any videos of guns shooting or questions please let me know. Offering a small discount for multiple purchases / a kind of bulk deal.

Everything is used other than the honeycomb pistol but everything is in proper working order. Prices have been dropped from previous lots, but I am still open to negotiate.

Available items:

-AW custom honeycomb, mint. 140$ shipped -Cybergun FAMAS lot with 7 mags 160$ shipped -Tan gear lot 110$ shipped -Airgun lot 80$ shipped (please check local laws) -Condor green vest lot 50$ shipped -Cybergun full auto deagle lot 100$ shipped

Items on hold:

-Krytac pdw starter kit 180$ shipped -Green gas glock lot 140 for both shipped or 80$ each -Hera arms CQR bundle 290$ shipped -M1911 55$ shipped -Semi auto / DMR HPA build asking 350$ shipped

Items sold: -none currentlly

Looking to move this HPA VFC MCX, as i want more MWS builds. Has a LayLax short barrel kit, Prometheus 6.03 209mm inner barrel, MAXX M4A hop up unit, ML 70 bucking, speed trigger, a real steel Vortex SPARC red dot, and an element flashlight

Will include HPA battery

Asking $1300 or will trade for high end MWS builds. I can pay shipping or can meet locally in the Atlantic City area. Price is negotiable

Pics: https://imgur.com/a/W6qyoPc

Don't know anything about them, pulled them from deep in my friends garage. All of them appear mostly complete (I see a barrel, hopup, and gearbox) but I don't have a battery, and can't test. Definately some missing small parts, the scar stock isn't locking in place. I can send more photos if you'd like.

Make me an offer, I can ship them, no idea what they're worth, so best offer takes them.

https://imgur.com/a/njFGCP2