Just got this beautiful thing and went to the range. 100 rounds in , zero jams or ftf issues but my factory Sig mags and my two Me Gar mags both had one mag function properly while the other only held back the slide part of the time. Is there an issue with sig mags? Or do I just need to break it all in more?

Hey everyone,

Bought this Taylor & Co 1911 A1 a few months back. .45 ACP.

It came with an 8 round magazine and I noticed that when I put in the 8th round into the magazine it’s slightly sticks up and isn’t flush with the other rounds, causing that gun to jam upon initial racking.

It only happens when I put that 8th round in, doesn’t happen when I have only 7.

I bought an extra 8 round magazine at a shop and it gives me zero problems.

Does anyone know what the issue could be/ how to fix?

I don’t have much experience taking apart magazines so I figured I’d ask before getting rid of the wonky one.

This is the second video in my series on everything 1911 ignition systems and is intended to help those who are new to the platform in taking the next step, with respect to a better trigger pull.

Video 2

Thinking of buying one this weekend.

Hi;

1911 dabbler here, looking to expand my collection. I am looking for a new single stack, 45ACP that is factory cut for RDS.

Needs: RDS compatible, 45 cap, gov’t/CDR length slide, single stack

Prefers: full size RDS (e.g. Trijicon SRO) ambi safety selector (will be installed after the fact if not part of factory config, plays well with Wilson Combat mags and/or McCormicks

Nice to have: 1913 rail dust cover, tool less take down (will probably change to traditional plug, guide rod and spring)

Purpose: range toy

Because someone will probably ask: I have a Springfield Trophy Match that’s gotten about 6 hours of ‘smith time to become what I like in a USPSA Single Stack gun. I would consider, but would rather not mill this gun for RDS as I like having it a competitive gun.

Price range: $1k-$2k.

No prior biases against any manufacturer in particular, nor brand loyalty. I like the new Sig 1911X, but really want a full size (not RMSc) footprint for RDS.

https://youtu.be/NQ2jGC9SU4I

Because of the sea of bad advice and fragmented nature of the good, I've decided to create a series of three videos, geared toward novices that cover everything 1911 ignition system.

This first one provides step by step instructions on how to tune a 1911 trigger, including details about how the ignition system works, down to how to detail strip your lower.
Video 2 will address the common "next steps", should someone want a better trigger pull than their gun can deliver, after tuning.
Video 3 walks viewers through an entire trigger job, from parts selection to prep, etc.

I'm no Martin Scorsese or Michael Mann, but I think this one turned out okay.

Complete strip, re assembly, etc. These really helped me get up nerve to tear down & replace parts.

I have a possible work trade for a Remington 1911 R1 Government NIB

Hopeing to get honest reviews. Quality? Dollar value?

It will be my first 1911. Thank you

The 45 ACP is one of the self-defense rounds – so long as you carry high-quality ammo, that is.

If you don’t use the best 45 ACP ammo for self-defense, you put yourself at risk of a failure to fire. You also put others at risk of getting struck by bullets that over-penetrated because they failed to expand inside the threat.

I tested various 45 ACP rounds in my Springfield Armory XDs everyday carry and my friend's full-size Colt 1911. Why did I do this? To see which rounds performed best, of course! I wouldn’t hesitate to load any of the following rounds in my concealed carry pistol.

Our Top Self-Defense Picks for 45 ACP Ammo in 2024

1. Speer Gold Dot 230 Grain JHP - Best Overall
2. PMC 185 Grain JHP - Best Value
3. Hornady Critical Defense 185 Grain FTX JHP - Best Hollow Points
4. Winchester Silvertip 185 Grain JHP - Best For Short Barrels
5. Federal Punch 230 Grain JHP - Honorable Mention

Continue reading Best 45 ACP Ammo For Self-Defense: Don’t Let The Bad Guys Win

Has anyone seen a 1911 with novak's engraved on the slide? Any info would be appreciated.

Pretty sure my 1911 Pachmayr rubber grips had a thin front strap piece that was captured under the side grips. Do they not include that anymore? I have it somewhere, gotta look harder for it.

This is my Springfield 1911. I bought it a few days ago from my LGs. I got it for a very good price. It is a 45 ACP.

I went to my local gun store looking for Hoppes and Gun Scrubber. I ended up seeing this Old School Springfield Champion in Stainless on the wall and I had to have it. I have not owned a 1911 before but I had done some research and was thinking of a cheap Tisas or Rock Island. So happy I got this Stainless Champion instead.

Can't wait to take it to the range next weekend!

https://preview.redd.it/bch4f87crc7d1.jpg?width=901&format=pjpg&auto=webp&s=52ee4e9f6b7cb89ecca9e1f4c7a62ff33b015211

https://preview.redd.it/osrhrb6crc7d1.jpg?width=920&format=pjpg&auto=webp&s=8972ba7a25d47c8a7fd49de863b2b76ae385c43b